summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-30arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBTStefan Roese
This patch enables the BBT in NAND on the AT91SAM based GARDENA smart Gateway. This is especially important, since the Linux driver also enables this option and uses the BBT table pages. Without setting this option, U-Boot will try to re-use these pages again (e.g. UBI). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
2019-09-30ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulatorMarek Vasut
This patch restores commit c49d0ac38a76 ("ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator"), which was accidentally dropped during DT resync in commit 317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0"). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Fixes: 317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
2019-09-28rockchip: make_fit_atf.py: fix .its generation for a single atf imageHeiko Stuebner
The commit 619f002db864 ("rockchip: make_fit_atf.py: fix loadables property set error") fixed the double-loading of the primary atf-image, but didn't take into account that there may be rare atf images with only that main section present. Right now this will result in a broken its due to the loadables section not getting closed correctly, so fix that by adapting the guards around the loop. The guards now protect against 0 segments when the bl31 binary doesn't contain any section and 1 segment when only a core atf section is present. Fixes: 619f002db864 ("rockchip: make_fit_atf.py: fix loadables property set error") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-28rockchip: misc: read the correct number of bytes from the efuseHeiko Stuebner
Originally the cpuid var the value gets read into was defined as u8 cpuid[RK3399_CPUID_LEN]; hence the sizeof(cpuid) would return the correct the correct number of array elements. With the move to a separate function cpuid becomes a pointer and sizeof(cpuid) hence returns the pointer size - 8 in the arm64 case. We do have the actual id length available as function param so use it for actual amount of bytes to read. Fixes: 04825384999f ("rockchip: rk3399: derive ethaddr from cpuid") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-26Merge tag 'efi-2019-10-rc5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc5 Bug fixes for the SetVariable() boot service.
2019-09-24ci: add envtools supportPierre-Jean Texier
This commit add envtools suppport to CI to verify if there is no build issues. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-24env: add missing <compiler.h> header filePierre-Jean Texier
Since commit af95f20 ("env: Create a new file for environment functions"), a new header file exists. So, this commit add a missing header file. Fixes: include/env.h:158:1: error: unknown type name ‘ulong’; did you mean ‘long’? ulong env_get_ulong(const char *name, int base, ulong default_val); ^~~~~ long include/env.h:158:49: error: unknown type name ‘ulong’; did you mean ‘long’? ulong env_get_ulong(const char *name, int base, ulong default_val); Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-24fw_env: fix build errorPierre-Jean Texier
The following error appears: tools/env/fw_env.c:1149:25: error: lvalue required as unary ‘&’ operand rc = write(fd, &ENV_REDUND_OBSOLETE, sizeof(ENV_REDUND_OBSOLETE)); Fixes: d3716dd ("env: Rename the redundancy flags") Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Heiko Schocher <hs@denx.de> Suggested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-24fw_env: remove duplicated definitionsPierre-Jean Texier
Since commit d3716dd ("env: Rename the redundancy flags"), the definitions of ENV_REDUND_OBSOLETE & ENV_REDUND_ACTIVE was moved to env.h. Fixes: tools/env/fw_env.c:122:22: error: ‘ENV_REDUND_ACTIVE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_ACTIVE = 1; ^~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:63:2: note: previous definition of ‘ENV_REDUND_ACTIVE’ was here ENV_REDUND_ACTIVE = 1, ^~~~~~~~~~~~~~~~~ tools/env/fw_env.c:127:22: error: ‘ENV_REDUND_OBSOLETE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_OBSOLETE; ^~~~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:62:2: note: previous definition of ‘ENV_REDUND_OBSOLETE’ was here ENV_REDUND_OBSOLETE = 0, Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-23efi_loader: SetVariable() deleting variablesHeinrich Schuchardt
APPEND_WRITE with data length zero is allowable according to the UEFI specification. The EDK2 interpretation of no access attributes is attributes = 0. As the UEFI specification is vague in this respect let's stick to EDK2 here. Fixes: commit 6d2f27c5fd60 ("efi_loader: variable: support APPEND_WRITE") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-23efi_loader: SetVariable() fix illegal returnHeinrich Schuchardt
We always have to return via EFI_EXIT() from EFIAPI functions. Coverity reported an unreachable line and a resource leak. Fixes: commit 6d2f27c5fd60 ("efi_loader: variable: support APPEND_WRITE") Reported-by: Coverity Scan CID 253575, CID 184095 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-23efi_loader: description efi_stri_coll()Heinrich Schuchardt
Remove outdated TODO for efi_stri_coll(). efi_stri_coll() is already using the Unicode capitalization table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-23Prepare v2019.10-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-22Merge tag 'fixes-for-2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video.git - fix sunxi LCD clock divider - fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO - fix splash banner output with DM_VIDEO
2019-09-21Merge tag 'efi-2019-10-rc4-5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc4 (5) This patch set fixes errors in the UEFI sub-system and adds a function to compare u16 strings which is prerequisite for further patches.
2019-09-21sunxi: video: HDMI: Fix LCD clock dividerMark Kettenis
Currently we may end up with an LCD clock divider that differs from the HDMI PHY clock divider if we can't exactly match the pixel clock. Fix this by using DIV_ROUND_UP to calculate the divider. This works since the PLL is chosen such that the resulting pixel clock is never higher than the requested pixel clock. Fixes: 1feed358ed15 ("sunxi: video: HDMI: Fix clock setup") Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2019-09-21splash: fix splash banner outputAnatolij Gustschin
Old splash code in cfb_console driver displayed U-Boot version string by default. Restore this behaviour for DM_VIDEO enabled configurations. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Fabio Estevam <festevam@gmail.com>
2019-09-21imx: mx6sabreauto: fix splash logo drawingAnatolij Gustschin
Enable BMP code. Also configure white on black for video console. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: colibri_imx6: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: icore: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment and enable BMP code. Also configure white on black for video console. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: apalis_imx6: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: mx6sabresd: fix splash logo drawingAnatolij Gustschin
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this. Also enable white on black console configuration as it used to be with cfb_console driver. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <festevam@gmail.com>
2019-09-21imx: wandboard: fix splash logo drawingAnatolij Gustschin
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this. Also enable white on black console configuration as it used to be with cfb_console driver. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21splash: fix logo drawing if CONFIG_VIDEO_LOGO enabledAnatolij Gustschin
After mxc_ipuv3 DM_VIDEO conversion board configs with enabled CONFIG_VIDEO_LOGO do not show splash screen (previosly drawing splash screen worked via cfb_console driver with CONFIG_VIDEO_LOGO enabled). Use splash_source library for loading splash images when CONFIG_SPLASH_SOURCE is selected, otherwise prepare built-in video logo for drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-20Merge tag 'u-boot-rockchip-20190920' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3288 tinker and evb SPL boot fail - Enable get sn from cpuid for rk3399 rockpro64 board
2019-09-20test: add tests for u16_str<n>cmp()AKASHI Takahiro
New seven test cases for u16_str<n>cmp() are added under Unicode unit test, which should be executed by "ut unicode" command. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20lib: charset: add u16_str<n>cmp()AKASHI Takahiro
u16 version of strcmp(): u16_strncmp() works like u16_strcmp() but only at most n characters (in u16) are compared. This function will be used in my UEFI secure boot patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20efi_loader: selftest: enable APPEND_WRITE testsAKASHI Takahiro
Now that APPEND_WRITE is supported, the result check for the only existing test case should be changed to 'todo' to 'error', while two more test cases are added. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20efi_loader: variable: support APPEND_WRITEAKASHI Takahiro
If EFI_VARIABLE_APPEND_WRITE is specified in attributes at efi_set_variable(), specified data will be appended to the variable's original value. Attributes other than APPEND_WRITE should not be modified. With this patch, APPEND_WRITE test in 'variables' selftest will pass. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-09-20efi_loader: incorrect return value form DisconnectControllerHeinrich Schuchardt
DisconnectController() should never return EFI_NOT_FOUND. If EFI_DRIVER_BINDING_PROTOCOL.Stop() fails, return EFI_DEVICE_ERROR. If the driver handle does not expose the EFI_DRIVER_BINDING_PROTOCOL return EFI_INVALID_PARAMETER. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20efi_loader: device_path: support Sandbox's "host" devicesAKASHI Takahiro
Sandbox's "host" devices are currently described as UCLASS_ROOT udevice with DEV_IF_HOST block device. As the current implementation of efi_device_path doesn't support such a type, any "host" device on sandbox cannot be seen as a distinct object. For example, => host bind 0 /foo/disk.img => efi devices Scanning disk host0... Found 1 disks Device Device Path ================ ==================== 0000000015c19970 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b) 0000000015c19d70 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b) => efi dh Handle Protocols ================ ==================== 0000000015c19970 Device Path, Device Path To Text, Device Path Utilities, Unicode Collation 2, HII String, HII Database, HII Config Routing 0000000015c19ba0 Driver Binding 0000000015c19c10 Simple Text Output 0000000015c19c80 Simple Text Input, Simple Text Input Ex 0000000015c19d70 Block IO, Device Path, Simple File System As you can see here, efi_root (0x0000000015c19970) and host0 device (0x0000000015c19d70) have the same representation of device path. This is not only inconvenient, but also confusing since two different efi objects are associated with the same device path and efi_dp_find_obj() will possibly return a wrong result. Solution: Each "host" device should be given an additional device path node of "vendor device path" to make it distinguishable. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20Merge branch '2019-09-19-master-imports'Tom Rini
- Coding style corrections in some RTC drivers. - Small doc updates. - Regression fix in part_test_dos() - Regression fix on TI OMAP WDTs. - Document deadline for CONFIG_DM migration. - Switch Travis-CI to "xenial" release.
2019-09-19dm: MIGRATION: Add migration plan for CONFIG_DMHeinrich Schuchardt
For many sub-systems we already require the driver model to be used. Yet there is still a handful of boards that do not have CONFIG_DM enabled. We should make CONFIG_DM compulsory with release v2020.01 Conversion dates for CONFIG_DM_SPL and CONFIG_DM_TPL are yet to be defined. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19watchdog: omap_wdt: Fix WDT target reset when booted from emmcSuniel Mahesh
AM335X based beaglebone black target gets reset by DM converted watchdog if booted from emmc around 60sec. Fixed this by moving driver's private struct variable initialization at different places in the driver to driver's probe. Tested on Beaglebone Black. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Fixes: 7659ea32 ("watchdog: omap_wdt: Convert watchdog driver to use DT and DM") Reported-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-09-19scrapyard: Delete this file and scriptTom Rini
The README.scrapyard file has been inconsistently updated. While well intentioned, bad data is worse than no data, and in this case a pointer to use the history that git provides. Remove the current content and the script that would update it from time to time as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-19disk: part_dos: Allocate at least one block size for mbrFaiz Abbas
The blk_dread() following the mbr allocation reads one block from the device. This will lead to overflow if block size is greater than the size of legacy_mbr. Fix this by allocating at least one block size. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-09-19kconfig: doc: Update comment regarding CONFIG_IS_ENABLED(FOO) for TPLLukasz Majewski
This patch adds some commit info for CONFIG_IS_ENABLED(FOO) when used in TPL context. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-19doc: fix: Replace SPL_OF_PLATDATA with OF_PLATDATA in examplesLukasz Majewski
The of-plat.rst file till this change has been using This is at best misleading as SPL_OF_PLATDATA is always defined when we want to use this SPL tinification feature (also in U-Boot proper). As a result the OF_PLATDATA SPL specific code is also compiled in when U-Boot proper is build. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19rtc: ds3231/ds3232: fix coding styleBiwen Li
The patch fixes coding style Signed-off-by: Biwen Li <biwen.li@nxp.com>
2019-09-19travis.yml: change Ubuntu version to xenialRamon Fried
trusty is getting old, move to xenial (16.04) to get updated gcc and other tools. Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2019-09-19rockchip: config: evb-rk3288: enable SPL_STACK_RKever Yang
We need a new STACK in SDRAM instead of SRAM so that the EMMC controller can work properly. The EMMC/SD controller's master is not able to access SRAM area, it can only access DRAM area. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19rockchip: evb-rk3288: Drop explicit SPL_TEXTKever Yang
SPL_TEXT_BASE is 0x0 by default, based on the kconfig definition move in below commit. "configs: move CONFIG_SPL_TEXT_BASE to Kconfig" (sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e) So, don't define it explicitly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19configs: rk3288: Increase bootm lengthJagan Teki
Increase bootm length to 64MB satisfy max gunzip size, even other rockchip and know SoC are following same length check. Reported-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19rockchip: rk3288-tinker: Attach missing peripherals at SPLMichael Trimarchi
Tinker board needs to mux all the sdmmc gpio and activate the regulator connected to bank 7. Remove all the bank that are not in use and mark them as dm,spl so-that it would initialize at SPL. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: tinker: Enable SDRAM, SPL stackJagan Teki
SPL sets up SDRAM while in its board_init_f() function, it is possible for the stack to move there before board_init_r() is reached. So it is required to reserve the stack for SDRAM, with a proper location and size otherwise any operations during SPL handoff would leads to failure. On, this particular context tinker-rk3288 SPL is failing to launch U-Boot proper on SDRAM due to lack of stack. U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530) Trying to boot from MMC1 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### So, enable SPL_STACK_R_ADDR and it's related-config items for SDRAM, SPL stack to setup properly. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: tinker: Drop explicit SPL_TEXTJagan Teki
SPL_TEXT_BASE is 0x0 by default, based on the kconfig definition move in below commit. "configs: move CONFIG_SPL_TEXT_BASE to Kconfig" (sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e) So, don't define it explicitly. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19rockchip: spi-boot-order: Trival fix to newline missingJagan Teki
newline \n was missed in fdt_path_offset, error loop. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19ram: rk3288: Initialize dram for TPL buildsJagan Teki
Few of the rk3288 boards like tinker, vyasa are using TPL, SPL bootchain so the dram initialization must needed during TPL stage. So add proper ifconstruct to satisfy both TPL, SPL and SPL-only bootchain boards. This eventually fixing TPL to SPL handoff, otherwise missing dram initilaztion at TPL stage would leads to SPL hang. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: vyasa-rk3288: Fix SPL_TEXT_BASEJagan Teki
The initial Vyasa-rk3288 TPL implementation is to reuse the SPL_TEXT_BASE for TPL and SPL as 0x0 and 0xff704000 respectively. But the below commit implements the reverse way of using TEXT_BASE's like 0xff704000 for TPL and 0x0 for SPL and which indeed update the SPL_TEXT_BASE for vyasa-rk3288 board. "rockchip: Kconfig: enable TPL support for rk3328" (sha1: 3f47db0275e0f1c1e89d8f13f8b4cdc86b1038ca) So, fix by dropping the legacy SPL_TEXT_BASE and it will reassign 0x0 by default based on Kconfig definition. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-26 11:56:04 +0000