summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-27riscv: Add SiFive FU540 board supportAnup Patel
This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27cpu: Bind timer driver for boot hartAtish Patra
Currently, timer driver is bound only for hart0. There is no mandatory requirement that hart0 should always come up. In fact, HiFive Unleashed SoC hart0 doesn't boot in S-mode because it only has M-mode. The timer driver should be bound for boot hart. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27drivers: serial_sifive: Skip baudrate config if no input clockAtish Patra
It is possible that input clock is not available because clk device was not available and 'clock-frequency' DT property is also not available. In this case, instead of failing we should just skip baudrate config by returning zero. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2019-02-27drivers: serial_sifive: Fix baud rate calculationAtish Patra
Compute the baud rate multipler with more precision. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-02-27clk: Add fixed-factor clock driverAnup Patel
This patch adds fixed-factor clock driver which derives clock rate by dividing (div) and multiplying (mult) fixed factors to a parent clock. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-27clk: Add SiFive FU540 PRCI clock driverAnup Patel
Add driver code for the SiFive FU540 PRCI IP block. This IP block handles reset and clock control for the SiFive FU540 device and implements SoC-level clock tree controls and dividers. Based on code written by Wesley Terpstra <wesley@sifive.com> found in commit 999529edf517ed75b56659d456d221b2ee56bb60 of: https://github.com/riscv/riscv-linux Boot and PLL rate change were tested on a SiFive HiFive Unleashed board. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2019-02-27net: macb: Fix GEM hardware detectionAtish Patra
Fix MID bit field check to correctly identify all GEM hardwares. The check is updated as per macb driver in Linux location: <linux_sources>/drivers/net/ethernet/cadence/macb_main.c:259 Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-02-27net: macb: Fix clk API usage for RISC-V systemsAnup Patel
Don't fail in macb_enable_clk() if clk_enable() returns -ENOSYS because we get -ENOSYS for fixed-rate clocks. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systemsAnup Patel
On 64bit systems, the DRAM top can be easily beyond 4GB and U-Boot DMA mapping APIs will generate DMA addresses beyond 4GB. This breaks DMA programming in 32bit DMA capable devices (such as Cadence MACB ethernet). For example, If DRAM is more then 2GB on QEMU sifive_u machine then Cadence MACB ethernet stops working for U-Boot because it is a 32bit DMA capable device. To handle 32bit DMA capable devices on 64bit systems, we provide custom implementation of board_get_usable_ram_top() which ensures that usable ram top is not more then 4GB. This in-turn ensures that U-Boot always runs within 4GB hence DMA addresses generated by DMA mapping APIs will be within 4GB too. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27riscv: Add place-holder asm/arch/clk.h for driver compilationAnup Patel
Some of the drivers (such as Cadence MACB ethernet driver) expect asm/arch/clk.h to be provided by arch support so we add place-holder asm/arch-generic/clk.h for RISC-V generic CPU. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-02-27riscv: Add asm/dma-mapping.h for DMA mappingsAnup Patel
This patch adds asm/dma-mapping.h for Linux-like DMA mappings APIs required by some of the drivers (such as, Cadance MACB Ethernet driver). Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-02-27riscv: Rename cpu/qemu to cpu/genericAnup Patel
The QEMU CPU support under arch/riscv is pretty much generic and works fine for SiFive Unleashed as well. In fact, there will be quite a few RISC-V SOCs for which QEMU CPU support will work fine. This patch renames cpu/qemu to cpu/generic to indicate the above fact. If there are SOC specific errata workarounds required in cpu/generic then those can be done at runtime in cpu/generic based on CPU vendor specific DT compatible string. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27riscv: Enable create symlink using kconfigAnup Patel
We select CREATE_ARCH_SYMLINK for RISC-V so that we can have include/asm/arch linked to include/asm/arch-xyz. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-26Merge tag 'efi-2019-04-rc3' of https://github.com/xypron2/u-bootTom Rini
Pull request for the UEFI sub-system for v2019.04-rc3 A new option -e is added to the env command which allows to display and change UEFI variables in a user friendly way. A new command efidebug is introduced to edit the UEFI boot sequence and to display different aspects of the state of the UEFI sub-system: memory map, loaded images, handles, drivers and devices. A bug in the UEFI boot manager is fixed.
2019-02-25cmd: efidebug: add memmap commandAKASHI Takahiro
"memmap" command prints uefi-specific memory map information. => efi memmap Type Start End Attributes ================ ================ ================ ========== CONVENTIONAL 0000000040000000-000000007de27000 WB RUNTIME DATA 000000007de27000-000000007de28000 WB|RT RESERVED 000000007de28000-000000007de2a000 WB RUNTIME DATA 000000007de2a000-000000007de2b000 WB|RT RESERVED 000000007de2b000-000000007de2c000 WB RUNTIME DATA 000000007de2c000-000000007de2d000 WB|RT LOADER DATA 000000007de2d000-000000007ff37000 WB RUNTIME CODE 000000007ff37000-000000007ff38000 WB|RT LOADER DATA 000000007ff38000-0000000080000000 WB Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25cmd: efidebug: add images commandAKASHI Takahiro
"images" command prints loaded images-related information. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25cmd: efidebug: add dh commandAKASHI Takahiro
"dh" command prints all the uefi handles used in the system. => efi dh 7ef3bfa0: Device Path, Device Path To Text, Device Path Utilities, Unicode Collation 2 7ef31d30: Driver Binding 7ef31da0: Simple Text Output 7ef31e10: Simple Text Input, Simple Text Input Ex 7ef3cca0: Block IO, Device Path 7ef3d070: Block IO, Device Path 7ef3d1b0: Block IO, Device Path, Simple File System 7ef3d3e0: Block IO, Device Path, Simple File System Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25cmd: efidebug: add drivers commandAKASHI Takahiro
"drivers" command prints all the uefi drivers on the system. => efi drivers Driver Name Image Path ================ ==================== ==================== 000000007ef003d0 <NULL> <built-in> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25cmd: efidebug: add devices commandAKASHI Takahiro
"devices" command prints all the uefi variables on the system. => efi devices Scanning disk ahci_scsi.id0lun0... Scanning disk ahci_scsi.id1lun0... Found 4 disks Device Device Path ================ ==================== 000000007ef07ea0 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b) 000000007ef00c10 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(0,0) 000000007ef00dd0 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(1,0) 000000007ef07be0 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(1,0)/HD(1,MBR,0x086246ba,0x800,0x40000) 000000007ef07510 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(1,0)/HD(2,MBR,0x086246ba,0x40800,0x3f800) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25cmd: add efidebug commandAKASHI Takahiro
Currently, there is no easy way to add or modify UEFI variables. In particular, bootmgr supports BootOrder/BootXXXX variables, it is quite hard to define them as u-boot variables because they are represented in a complicated and encoded format. The new command, efidebug, helps address these issues and give us more friendly interfaces: * efidebug boot add: add BootXXXX variable * efidebug boot rm: remove BootXXXX variable * efidebug boot dump: display all BootXXXX variables * efidebug boot next: set BootNext variable * efidebug boot order: set/display a boot order (BootOrder) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25efi_loader: define load option attributesAKASHI Takahiro
See UEFI specification v2.7a, section 3.1.3, "Load Option Processing." Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25cmd: env: add "-e" option for handling UEFI variablesAKASHI Takahiro
"env [print|set] -e" allows for handling uefi variables without knowing details about mapping to corresponding u-boot variables. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25efi_loader: fix entry count in bootmgrHeinrich Schuchardt
Since commit 914df75b0c97 ("efi_loader: fix EFI entry counting") entry_count is already set to 1 before efi_bootmgr_load() is called. So we should not increment it when entering the function. Without the patch an assert error occurs in efi_get_variable() if DEBUG is defined. Fixes: 914df75b0c97 ("efi_loader: fix EFI entry counting") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25efi_loader: error message if BootOrder not definedHeinrich Schuchardt
For booting via `bootefi bootmgr` it is necessary that the EFI variable BootOrder is defined. Provide a diagnostic message if the variable is missing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-22Merge branch '2019-02-22-master-imports'Tom Rini
- Migrate PREBOOT to Kconfig - LED Kconfig correction - defconfig resync
2019-02-22preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOTMasahiro Yamada
This is the same migration path as commit b6251db8c3f0 ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). I also moved the description in README to the Kconfig help. I ripped off the sentence about 'LWMON' since it is gone already. I only let my boards migrate, leaving the rest to platform maintainers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-22cmd: Kconfig: LED command depends on LED subsystemsJan Kiszka
Without CONFIG_LED, we get cmd/built-in.o: In function `show_led_state': cmd/led.c:40: undefined reference to `led_get_state' cmd/built-in.o: In function `do_led': cmd/led.c:99: undefined reference to `led_get_by_label' cmd/led.c:108: undefined reference to `led_set_state' Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2019-02-22configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-02-20Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2019-02-20Merge git://git.denx.de/u-boot-x86Tom Rini
- Add support for sound. Albeit the big changeset, changes are pretty limited to x86 only and a few new sound drivers used by x86 so I think it would be good to have this in the next release.
2019-02-20Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
- Support of NXP's LX2160RDB and LX2160QDS platform - Enable SATA DM model for NXP's ARM SoCs
2019-02-20board: toradex: turn off lcd backlight before OS handoverGerard Salvatella
U-Boot typically tears down the display controller before handing control over to Linux. On LCD displays disabling pixel clock leads to a fading out effect with vertical/horizontal lines. Make sure to disable back light before booting Linux. Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20nyan-big: drop CONFIG_KEYBOARDPeter Robinson
The CONFIG_KEYBOARD does nothing as it's legacy and unused so just drop it from the config. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20Kconfig: tegra: Migrate TEGRA_KEYBOARDPeter Robinson
Migrate TEGRA_KEYBOARD from headers to Kconfig, only the seaboard uses it but we drop CONFIG_KEYBOARD as the driver doesn't use the legacy drv_keyboard_init. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20Kconfig: tegra: Migrate USB_EHCI_TEGRAPeter Robinson
Migrate USB_EHCI_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20Kconfig: tegra: Migrate SYS_I2C_TEGRAPeter Robinson
Migrate SYS_I2C_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20ARM: tegra: Reserve 32MB for the Linux kernelJonathan Hunter
Booting recently Linux -next kernels on 32-bit Tegra devices has been failing when using the 'multi_v7_defconfig' kenrel configuration because the size of has grown such that it is overwriting the FDT blob. Current Linux -next kernels built with the 'multi_v7_defconfig' have a total size of ~19.5MB (where .text is ~12.5MB, .data is ~6.5MB and .bss is ~0.5MB). Therefore, increase the memory location reserved for the Linux kernel to 32MB from 16MB for 32-bit Tegra devices. This change has been boot tested on Tegra20 Ventana, Tegra30 Cardhu and Tegra124 Jetson TK1 with the Linux next tree (20190212). Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20ARM: tegra: enable ums on nyan boardsTristan Bastian
This patch enables UMS on the nyan devices like the nyan-big. A patch like this has been sent in by Stephen Warren some time ago for other tegra devices: commit e6607cffef965011ef0ddc0fbe6f4b7c0d53aeec. But the nyan devices never received that functionality. Signed-off-by: Tristan Bastian <tristan-c.bastian@gmx.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20nyan-big: add padding to its fileTristan Bastian
Without this padding nyan-big ends at a blank screen on boot. Details on how to get to this padding can be found in the README.chromium under Notes. Signed-off-by: Tristan Bastian <tristan-c.bastian@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20nyan-big: change spi delayTristan Bastian
Internal keyboard of nyan-big is only working when cold booting by pressing [reload/refresh]+[power] button. With this patch keyboard is working by only pressing [power] button. Signed-off-by: Tristan Bastian <tristan-c.bastian@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20tegra20: common: fix USB_EHCI_TXFIFO_THRESH valuePeter Robinson
All other Tegra devices that define USB_EHCI_TXFIFO_THRESH use hex representation, fix tegra20 to be the same format. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20tegra: cleanup dangling comments in include/configsPeter Robinson
There's a number of dangling comments in various tegra configs post migrations of various configs so lets clean them up. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20x86: Add sound support for samusSimon Glass
Enable sound on samus using the broadwell I2S and an RT5677 audio codec. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-02-20x86: sound: Add sound support for samus (broadwell)Simon Glass
Add a sound driver for samus which ties together the audio codec and I2S controller. For now broadwell_sound is commented out in the makefile since we cannot compile it without sound support enabled. The next commit fixes this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20sound: Add a driver for RealTek RT5677Simon Glass
This audio codec is used on samus. Add a driver for it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: sound: Add support for broadwell I2SSimon Glass
I2S is used to send digital audio data to an audio codec. Add support for this on broadwell. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: broadwell: Add support for serial I/O devicesSimon Glass
Add support for initing the I2C device and ADSP on broadwell. These are needed for sound to work. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: broadwell: Don't bother probing the PCH for pinctrlSimon Glass
At present the pinctrl probes the PCH but since it only uses it to obtain a PCI address, this is no necessary. Avoiding this fixes one of the two co-dependent loops in broadwell. This driver really should be a proper pinctrl driver, but for now it remains a syscon device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: broadwell: Add support for the ADSPSimon Glass
The Application Digital Signal Processor is used for sound processing with broadwell. Add a driver to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: coreboot: Enable the beeper sound driverSimon Glass
Use the i8254 sound driver to support creating simple beeps. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-09 17:46:52 +0000