summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-07imx6: aristainetos: add aristainetos 2b cslHeiko Schocher
add aristainetso board version CSL. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: readd aristainetos 2b boardHeiko Schocher
readd aristainetos 2b board. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: enable HAB bootHeiko Schocher
enable IMX_HAB on aristianetos board Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: cleanup default EnvironmentHeiko Schocher
sync defaut Envoronment with customer changes. Unfortunately they are not changeable, as already board is in production mode. Get rid of the big bootcommand and set bootcommand through Kconfig option. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: WDT DM conversion enable WDT resetHeiko Schocher
enable config symbols: CONFIG_SYSRESET CONFIG_SYSRESET_WATCHDOG Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: cleanup bootmode settingsHeiko Schocher
on the aristainetos there are some jumpers for changing behaviour setting up Environment. Clean this up. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add version variableHeiko Schocher
add VERSION_VARIABLE Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add AUTOBOOT_KEYEDHeiko Schocher
add stop autobooting via SHA256 encrypted password. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add i2c eeprom supportHeiko Schocher
add support for i2c eeprom and add parsing "Rescue" or "DefEnv" at offset 0x1ff0. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: get rid of CONFIG_BOARDNAMEHeiko Schocher
CONFIG_BOARDNAME is not longer needed, as we use the model information from DTS. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: convert to DM_PWM/DM_BACKLIGHTHeiko Schocher
use DM_PWM and DM_BLACKLIGHT support and remove board code. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add DM_I2C supportHeiko Schocher
enable DM_I2C in defconfig and remove i2c specific board code. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add DM_VIDEO supportHeiko Schocher
add DM_VIDEO support and remove now unneeded board code. As we show a bmp logo on boot, call now bmp_display() from board code and do not use cfb_console anymore. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: enable DM_ETHHeiko Schocher
enable DM_ETH and remove unneeded board code. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: convert CONFIG_DM_SPIHeiko Schocher
enable CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH and get rid of build removal warnings. define CONFIG_GPIO_ENABLE_SPI_FLASH is not longer needed, so remove it from config_whitelist.txt Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: convert to DM_USBHeiko Schocher
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB in defconfig. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: convert gpio pins to DM and DTSHeiko Schocher
Enable DM_GPIO, GPIO_HOG, LED and LED_GPIO as gpio and LEDs are now defined in DTS. Enable also here the pinctrl driver, so pinmux setup is also done. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: convert to DM_MMCHeiko Schocher
Enable DM_MMC support. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add DM_SERIAL supportHeiko Schocher
add DM_SERIAL support for the aristainetos board, and remove not used code from board code. remove CONSOLE_OVERWRITE_ROUTINE. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: prepare dts for other board versionsHeiko Schocher
as we switch to support DM and DTS, rework the existing DTS trees. Change also Linux specific Device trees, goal is to push this changes to linux. Collect U-Boot specific changes in separate "*u-boot*" dts files. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: remove aristainetos-v2.cHeiko Schocher
remove aristainetos-v2.c file, as we now want to switch to DM/DTS support and have all board specific code in one file. Goal is to setup differences through DT. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add thumb buildHeiko Schocher
add thumb build to aristainetos build to save binary space. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add device tree from linuxHeiko Schocher
Add device trees from Linux in preparation for driver model conversions. device tree files taken from Linux: 71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest" and added SPDX license identifier. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: disable gigabit supportHeiko Schocher
gigabit support does not work on the aristainetos board, so disable it. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: remove 2b versionHeiko Schocher
remove 2b version of aristainetos board, as it is easier to make the DM / DTS port and introduce the 2b board version again (also some more board version). Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: move defines to KconfigHeiko Schocher
move defines, which are already moved to Kconfig out of board config. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07video: lg4573: convert to DMHeiko Schocher
convert this driver to support DM. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: remove aristainetos boardHeiko Schocher
remove not anymore used aristainetos board. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-06Merge branch 'next'Tom Rini
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2020-01-06Prepare v2020.01Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-04Revert "mmc: davinci: drop struct davinci_mmc_plat"Tom Rini
Adam Ford reports that this change breaks booting on da850-evm and Bartosz Golaszewski agrees that with the impending release we should revert the change for now. With that noted: This reverts commit 21a4d80a710c79053ac1deaa65ff9b69e6c031d4. Cc: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into nextTom Rini
- updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support
2020-01-03Merge branch '2020-01-03-master-imports'Tom Rini
- Fixes for host tools with musl C library - Two fixes for TI K3 platforms
2020-01-03arm: mach-k3: Enable WA for R5F deadlockLokesh Vutla
On K3 devices there are 2 conditions where R5F can deadlock: 1.When software is performing series of store operations to cacheable write back/write allocate memory region and later on software execute barrier operation (DSB or DMB). R5F may hang at the barrier instruction. 2.When software is performing a mix of load and store operations within a tight loop and store operations are all writing to cacheable write back/write allocates memory regions, R5F may hang at one of the load instruction. To avoid the above two conditions disable linefill optimization inside Cortex R5F which will make R5F to only issue up to 2 cache line fills at any point of time. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-03arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config toolLokesh Vutla
Update the ddr settings to use the DDR reg config tool rev 0.2.0. This reduces the aging count(in DDRSS_CTL_274_DATA reg) to 15 in-order to avoid DSS underflow errors. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2020-01-03include/u-boot/crc.h: pull 'uint' definition on musl targetsSergei Trofimovich
The build failure was originally reported on arm64-musl target at https://bugs.gentoo.org/703132. Here is the amd64-musl variant: ``` $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc) $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc) ... include/u-boot/crc.h:37:44: error: unknown type name 'uint'; did you mean 'int'? 37 | void crc16_ccitt_wd_buf(const uint8_t *in, uint len, | ^~~~ | int ``` Note: 'uint' is not defined there. On glibc 'uint' comes from <sys/types.h> and happens to work on most .c files. The change imports 'uint' declaration from '<compiler.h>'. Bug: https://bugs.gentoo.org/703132 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-03include: fix 'ulong' definition on musl targetsSergei Trofimovich
The build failure was originally reported on arm64-musl target at https://bugs.gentoo.org/703132. Here is the amd64-musl variant: ``` $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc) $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc) ... In file included from tools/env/../../env/flags.c:7, from tools/env/env_flags.c:1: include/env.h:159:1: error: unknown type name 'ulong'; did you mean 'long'? 159 | ulong env_get_ulong(const char *name, int base, ulong default_val); | ^~~~~ | long ``` Note: 'ulong' is not defined there. On glibc 'ulong' comes from <sys/types.h>: ```c /* Old compatibility names for C types. */ typedef unsigned long int ulong; ``` On musl it comes from <sys/types.h> as well but from under different guards: ```c typedef unsigned long u_long, ulong; ``` The change inlines 'ulong' define similar to 'uint' define. Bug: https://bugs.gentoo.org/703132 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-02Merge tag 'fixes-v2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix missing graphics output on some x86 boards - avoid using #ifdef in video code - add .gitignore for video font *.S files
2020-01-02video: add wrappers for ttf type files to .gitignoreDario Binacchi
The scripts/Makefile.lib generates an assembler file (*.S) to wrap the font data for each file of type ttf defined in Kconfig. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-01-02Merge tag 'u-boot-rockchip-20191231' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix latest mainline kernel for rk3308 - Update rk3288-evb config to suport OP-TEE - Fix for firefly-px30 DEBUG_UART channel and make it standalone - Script make_fit_atf add python3 support - Fix rk3328 timer with correct COUNTER_FREQUENCY - Fix rk3328 ATF support with enable spl-fifo-mode
2020-01-02Merge branch '2020-01-02-master-imports'Tom Rini
- Assorted test.py fixes - Other minor changes
2020-01-02test: Fix the boardspec for the SPL handoff testSimon Glass
This test currently does not run because it specifies the sandbox board instead of sandbox_spl. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02mailmap: Update mail address for Igor OpaniukIgor Opaniuk
My address at Linaro doesn't exist anymore, so people keep getting mail delivery error responses. Map this address to the actual one. Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-02test_env: don't strip() printenv resultsStephen Warren
get_env() was originally written to strip() the output of printenv to isolate the test from any whitespace changes in printenv's output. However, this throws away any whitespace in the variable value, which can cause issues when test code expects to see that whitespace. In fact, printenv never adds any whitespace at all, so there's no need to strip. The strip causes a practical problem for test_env_echo_exists() if state_test_env.get_existent_var() happens to choose a U-Boot variable that contains trailing whitespace. This is true for variable boot_targets. With Python 2, get_existent_var() never returned boot_targets so this issue never caused a practical problem. With Python 3, get_existent_var does sometimes return boot_targets, no doubt due to Python 3's different dict hash key order implementation, about 0.5-2% of the time, so this test appears intermittent. With the strip removed, this intermittency is solved, since the test passes for all possible U-Boot variables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2020-01-02arch/arm/Kconfig: typo/grammar/punctuation fixesRobert P. J. Day
Various (mostly minor) spelling, grammar and punctuation tweaks for arch/arm/Kconfig. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2020-01-02.gitignore: ignore files generated by asn1 compilerDario Binacchi
As described in doc/README.asn1 document the tools/asn1_compiler is used to "generate bytecode as a C file (*.asn1.[ch]) from *.asn1 file". Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-01-02tools: .gitignore: add asn1_compilerDario Binacchi
Add the tool to the ignore list to prevent being marked as unversioned. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-02video: Avoid using #ifdef in video-uclass.cSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use IS_ENABLED(), etc., instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02video: Avoid using #ifdef in vidconsole-uclass.cSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use CONFIG_IS_ENABLED() instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02video: Avoid using #ifdef in console_rotate.cSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use IS_ENABLED() instead. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-22 08:08:29 +0000