summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-26clock_imx8mq: Make frac_pll_init() staticPedro Jardim
Since frac_pll_init() is only used in this file, change it to 'static'. This fixes the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:662:5: warning: no previous prototype for ‘frac_pll_init’ [-Wmissing-prototypes] Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26clock_imx8mq: Remove the function sscg_pll_init()Pedro Jardim
Function sscg_pll_init() is not used anywhere, so it can simply be deleted. This was found because of the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:702:5: warning: no previous prototype for ‘sscg_pll_init’ [-Wmissing-prototypes] int sscg_pll_init(u32 pll) ^~~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26clock_imx8mq: Make do_imx8m_showclocks() staticPedro Jardim
Since do_imx8m_showclocks() is only used inside this file, make it 'static'. This fixes the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:836:5: warning: no previous prototype for ‘do_imx8m_showclocks’ [-Wmissing-prototypes] int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26clock_imx8mq: Delete not used init_usb_clk()Pedro Jardim
Function init_usb_clk() is not used anywhere, so it can simply be deleted. This was detected by the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:377:6: warning: no previous prototype for ‘init_usb_clk’ [-Wmissing-prototypes] void init_usb_clk(void) ^~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
2020-01-26clk: imx: pllv3: fix potential 'divide by zero' in av_set_rate()Giulio Benetti
Guard 'parent_rate==0' to prevent 'divide by zero' issue in clk_pplv3_av_set_rate(). If it is 0, let's return with -EINVAL. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-26clk: imx: pllv3: fix potential 'divide by zero' in av_get_rate()Giulio Benetti
Guard 'mfd==0' to prevent 'divide by zero' issue in clk_pplv3_av_get_rate(). If it is 0, let's return with EIO since mfd should never be 0 at all. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-26clk: imx: pllv3: fix potential 'divide by zero' in sys_get_rate()Giulio Benetti
Guard 'parent_rate==0' to prevent 'divide by zero' issue in clk_pplv3_sys_get_rate(). If it is 0, let's return with -EINVAL. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-26common: fix regression on block cache initAngelo Durgehello
m68k needs block cache list initialized after relocation. Other architectures must not be involved. Fixing regression related to: commit 1526bcce0f7285087621e16e6720636d01839da8 ("common: add blkcache init") Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-26arm: mvebu: fix A38x breakage from commit bb872dd930ccJoel Johnson
This function parameter usage of load_addr was incorrectly caught in the clarifying renames of commit bb872dd930cc, which results in boot failures on Marvell A38x. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Patch-to: Simon Glass <sjg@chromium.org>
2020-01-26Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai) - Allwinner R40 Ethernet, usb phy enablement (Andre Przywara) - Sunxi auto load from 128KB MMC offset (Andre Przywara) - Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
2020-01-26configs: Orange Pi Win: enable ethernet phyJernej Skrabec
Orange Pi Win has gigabit ethernet port, but default U-Boot configuration for that board enabled ethernet driver but didn't enable realtek phy. Fix that. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-26sunxi: Automate loading from 128KB MMC offsetAndre Przywara
Since commit 067e0b9684d4 ("sunxi: Allow booting from 128KB SD/eMMC offset") we support having the SPL loaded from either the traditional 8KB SD card/eMMC offset, or from the alternative location at 128KB. However the sector to find the U-Boot image was still hard-coded at compile time, and had to be adjusted for one of the two choices. Since we can actually override the function to return the sector offset, we can just check the boot source byte there to select the proper offset based on from where the SPL was loaded. This allows the very same binary image to be loaded from either 128KB or 8KB, with the U-Boot proper image always being located just behind the SPL. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-26sunxi: SPL: Factor out sunxi_get_boot_source()Andre Przywara
The Boot ROM write some boot source ID (SD card, eMMC, SPI, ...) into a certain location in SRAM, so the SPL can easily determine where to load U-Boot proper from. Factor out reading this value, as it will come in handy again shortly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-26clk: Fix error checking of dev_read_addr_ptrSean Anderson
dev_read_addr_ptr returns NULL on error, not FDT_ADDR_T_NONE. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-26clk: Include missing headers for linux/clk-provider.hSean Anderson
This header was missing a couple of include dependencies when included on its own. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-26clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA ↵Giulio Benetti
is enabled clk_get_by_name() requires clk_get_by_id() that is not available if CONFIG_OF_PLATDATA is defined, so move clk_get_by_name() into #else condition of #if CONFIG_IS_ENABLED(OF_PLATDATA). Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-26clk: show more error info when uclass_get_device_by_namePeng Fan
It will ease debug when uclass_get_device_by_name failed with more error info printed out. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-26clk: mediatek: use unsigned type for returning the clk rateFabien Parent
mtk_clk_find_parent_rate is calling clk_get_rate to know the rate of a parent clock. clk_get_rate returns a ulong, while mtk_clk_find_parent_rate returns an int. This implicit cast creates an issue for clock rates big enough to need the full 32 bits to store its data. When that happen the clk rate will become incorrect because of the implicit cast between ulong -> int -> ulong. This commit change the return type of mtk_clk_find_parent_rate to ulong. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2020-01-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
Updates and fixes for ls1028a, lx2160a, ls1012a, ls1021a, ls2080a, ls1088a platforms: - lx2-rev2 pcie support, enetc related updates, layerscape-pcie fixes
2020-01-25Merge branch '2020-01-24-master-imports'Tom Rini
- Enable fastboot on some MediaTek platforms - DMA enchancements - Assorted bugfixes
2020-01-25mtd: add prototypes for weak functionPatrick Delaunay
This patch adds a prototype for the weak function board_mtdparts_default(). It solves one warning when compiling with W=1 on stm32mp1 board: board/st/stm32mp1/stm32mp1.c: warning: no previous prototype for 'board_mtdparts_default' [-Wmissing-prototypes] void board_mtdparts_default(const char **mtdids, const char **mtdparts) ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-25common: blk: fix comment about blkcache_read return valueEric Nelson
The blkcache_read() routine returns 1 (true) to indicate that a block was found in the cache and returned, or 0 if not. Signed-off-by: Eric Nelson <eric@nelint.com>
2020-01-25meerkat96: fix typo in MAINTAINERS email addressShawn Guo
There is a typo in meerkat96 MAINTAINERS email address. Fix it. Reported-by: Carl Gelfand <carl@novtech.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2020-01-25genboardscfg.py: drop python version commentBaruch Siach
genboardscfg.py requires python 3.x since commit 3bc14098d8fb ("genboardscfg.py: Convert to Python 3"). Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25common: add blkcache initAngelo Durgehello
On m68k, block_cache list is relocated, but next and prev list pointers are not adjusted to the relocated struct list_head address, so the first iteration over the block_cache list hangs. This patch initializes the block_cache list after relocation. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com> Reviewed-by: Eric Nelson <eric@nelint.com>
2020-01-25net: macb: Drop local cache flushVignesh Raghavendra
Now that arch specific dma mapping APIs take care of cache flush/invalidate, drop local cache flush operation. While at that fix dma_unmap_single() call to match new prototype Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-01-25mtd: denali: Drop custom dma mapping functionsVignesh Raghavendra
Drop local dma_map_single() and dma_unmap_single() and use arch specific common implementation Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25mmc: tmio-common: Drop custom dma mapping functionsVignesh Raghavendra
Drop local dma_map_single() and dma_unmap_single() and use arch specific common implementation Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-25asm: dma-mapping.h: Fix dma mapping functionsVignesh Raghavendra
Subsystems such as USB expect dma_map_single() and dma_unmap_single() to do dcache flush/invalidate operations as required. For example, see see drivers/usb/gadget/udc/udc-core.c::usb_gadget_map_request(). Currently drivers do this locally, (see drivers/usb/dwc3/ep0.c, drivers/mtd/nand/raw/denali.c etc..) Update arch specific dma_map_single() and dma_unmap_single() APIs to do cache flush/invalidate operations, so that drivers need not implement them locally. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-01-25fastboot: mt85xx: add command to flash/erase emmc hwpartmingming lee
This patch includes the following: 1. Add fastboot command to erase the whole EMMC_USER 2. Add fastboot command to flash image at EMMC_BOOT1 3. Add fastboot command to erase the whole EMMC_BOOT1 4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25configs: mt8518: Enable fastboot related configsmingming lee
Enable EFI module. Enable fastboot. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25configs: mt8518: enable usb gadget drivermingming lee
Enable board_late_init and usb gadget for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25configs: mt8518: set global variables for fastbootmingming lee
set common fastboot variables for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25ARM: Mediatek: Add board_late_init to init usb gadget drivermingming lee
Add board_late_init function to init usb gadget driver for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25usb: musb-new: mt85xx: add musb-new gadget driver.mingming lee
Using musb-new structure for mt85xx gadget driver. Add gadget driver dts for mt8518 SoCs. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25crypto: make mod_exp_sw() staticHeinrich Schuchardt
Function mod_exp_sw() is only used via the operators of the uclass. It is not defined in any include. Make mod_exp_sw() static. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-25lib: Kconfig dependencies for pseudo-random libraryHeinrich Schuchardt
drivers/rng/sandbox_rng.c requires rand() to be defined but configuration option CONFIG_CONFIG_LIB_RAND selected in drivers/rng/Kconfig does not exist. test/lib/test_aes.c requires rand() to be defined. Fix the selection criteria for choice "Pseudo-random library support type". Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-25lib: rsa: consider CONFIG_SPL_RSAHeinrich Schuchardt
CONFIG_SPL_RSA is meant to control if lib/rsa/* is used for SPL. Adjust lib/Makefile to consider this setting. This was correctly setup with commit 51c14cd128f4 ("verified-boot: Minimal support for booting U-Boot proper from SPL") and got lost with commit 089df18bfe9d ("lib: move hash CONFIG options to Kconfig"). Fixes: 089df18bfe9d ("lib: move hash CONFIG options to Kconfig") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-24sunxi: Add Libre Computer ALL-H5-CC H5 boardChen-Yu Tsai
The Libre Computer ALL-H5-CC board is an upgraded version of the ALL-H3-CC. Changes include: - Gigabit Ethernet via external RTL8211E Ethernet PHY - 16 MiB SPI NOR flash memory - PoE tap header - Line out jack removed Only H5 variant test samples were made available, and the vendor is not certain whether other SoC variants would be made or not. Furthermore the board is a minor upgrade compared to the ALL-H3-CC. Thus the device tree simply includes the one for the ALL-H3-CC, and adds the changes on top. The device tree was synced over from the Linux kernel, along with other H3/H5 changes, in a previous patch. Thus only the defconfig and an entry to the MAINTAINERS file is added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: drop CONFIG_SYS_SPI_U_BOOT_OFFS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: Add Libre Computer ALL-H3-IT H5 boardChen-Yu Tsai
The Libre Computer ALL-H3-IT board is a small single board computer that is roughly the same size as the Raspberry Pi Zero, or around 20% smaller than a credit card. The board features: - H2, H3, or H5 SoC from Allwinner - 2 DDR3 DRAM chips - Realtek RTL8821CU based WiFi module - 128 Mbit SPI-NOR flash - micro-SD card slot - micro HDMI video output - FPC connector for camera sensor module - generic Raspberri-Pi style 40 pin GPIO header - additional pin headers for extra USB host ports, ananlog audio and IR receiver Only H5 variant test samples were made available, but the vendor does have plans to include at least an H3 variant. Thus the device tree is split much like the ALL-H3-CC, with a common dtsi file for the board design, and separate dts files including the common board file and the SoC dtsi file. The other variants will be added as they are made available. The device tree was synced over from the Linux kernel, along with other H3/H5 changes, in a previous patch. Thus only the defconfig and an entry to the MAINTAINERS file is added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: drop CONFIG_SYS_SPI_U_BOOT_OFFS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: move CONFIG_SYS_SPI_U_BOOT_OFFS out of defconfigAndre Przywara
For Allwinner SoCs the CONFIG_SYS_SPI_U_BOOT_OFFS value is not really a board choice: The boot ROM only loads the SPL from offset 0 of the SPI NOR flash, and loads at most 32KB. This is a similar situation as on MMC, so consequently we create our "joint" image (SPL + U-Boot proper) with that 32KB offset during the build. So define the value of this symbol to be 32KB by default for every Allwinner SoC. This removes the definition of this symbol from the _defconfig files, and avoids every board to define this over and over again. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: defconfig: R40 boards: enable USBAndre Przywara
Now that the USB PHY on the Allwinner R40 SoC is supported, enable USB support for the two R40 boards U-Boot supports. For this we need to add the GPIO pin that powers the USB port(s), also enable the usual suspects (OHCI/EHCI support). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24phy: sun4i-usb: Add Allwinner R40 supportAndre Przywara
Since every Allwinner USB PHY seems to be slightly different from each other, we need to add the compatible string and the respective data structure to make it work on the R40/V40 SoC. Nothing spectacular this time, just one less USB controller than the H3. Copied from the Linux kernel. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: defconfig: Bananapi M2 Berry: enable EthernetAndre Przywara
The M2 Berry features the normal Gigabit PHY connected to the SoC's MAC, so enable the sun8i-emac driver to support Ethernet on the board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: dts: R40: Update Bananapi M2 Berry .dtsAndre Przywara
Update the .dts file from the kernel, which carries much more nodes, some of them we need to enable USB and Ethernet support for the board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108Chen-Yu Tsai
Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24common: Update comment to show progressSimon Glass
This file doesn't include any declarations anymore but it does include other headers. Update the header comment to mention this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Collect all the header files togetherSimon Glass
There are many header files included here. Put them all together since the blank lines are not useful. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATASimon Glass
This is not really a CONFIG since it is not intended to be set by boards. Move it into the compiler header with other similar defines, and rename it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move ROUND() into kernel.hSimon Glass
Move this macro in with all the other rounding macros. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-27 11:20:00 +0000