summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-23m68k: cache: define ARCH_DMA_MINALIGN for DMA buffer alignmentAnton Staaf
Signed-off-by: Anton Staaf <robotboy@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Jason Jin <jason.jin@freescale.com>
2011-10-23arm: cache: define ARCH_DMA_MINALIGN for DMA buffer alignmentAnton Staaf
Signed-off-by: Anton Staaf <robotboy@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-10-23NS16550: trivial code clean for checkpatchSimon Glass
This removes most checkpatch warnings from the ns16550 driver and its header. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-23MPC85xx: remove broken "mpq101" boardWolfgang Denk
The board stopped building some time ago, and the board maintainer agrtees to drop it - see http://article.gmane.org/gmane.comp.boot-loaders.u-boot/112674 Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Alex Dubov <oakad@yahoo.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org>
2011-10-23serial: uartlite: Fix compilation warningsMichal Simek
Do not setup userial_ports array as const because in uartlite_serial_putc is out_be32 which can't write to tx_fifo if is const. Warning log: serial_xuartlite.c: In function 'uartlite_serial_putc': serial_xuartlite.c:60: warning: initialization discards qualifiers from pointer target type serial_xuartlite.c: In function 'uartlite_serial_getc': serial_xuartlite.c:78: warning: initialization discards qualifiers from pointer target type serial_xuartlite.c: In function 'uartlite_serial_tstc': serial_xuartlite.c:87: warning: initialization discards qualifiers from pointer target type Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-22hwmon: Provide dtt_init()Dirk Eibach
Our boards rely on dtt for initialization of fan hardware. dtt_init() was implemented to be called form board specific code. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de>
2011-10-22common: cosmetic: CONFIG_BOOTFILE checkpatch complianceJoe Hershberger
Remove MK_STR from places that consume CONFIG_BOOTFILE to force all definitions to be string literals. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22common: cosmetic: CONFIG_ROOTPATH checkpatch complianceJoe Hershberger
Remove MK_STR from places that consume CONFIG_ROOTPATH to force all definitions to be string literals. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22autoconf.mk.dep: use target cflags, not hostMike Frysinger
The current autoconf.mk.dep rule uses the host cflags when executing the target compiler (which includes target header files). We don't want to mix the target compiler and host compiler flags, so change it to CFLAGS. Otherwise we get things like -pedantic which the U-Boot source code does not build with. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22build: force migration away from $(AR)Mike Frysinger
People keep adding new code that still uses $(AR) instead of $(cmd_link_o_target), so turn it into a build time error. We still use $(AR) locally, but we don't use $(ARFLAGS). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22build: add missing $(AR)->$(cmd_link_o_target) updateMike Frysinger
Seems people fixed their files to use libfoo.o, but didn't actually update the creation targets to use $(cmd_link_o_target). Update the rest of the Makefile's found with grep. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Simon Glass <sjg@chromium.org>
2011-10-22Makefile: Remove MLO on make cleanJoel A Fernandes
SPL builds could leave an MLO which is an mkimage of type omapimage Make sure its deleted on make clean/distclean Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
2011-10-22consolidate mdelay by providing a common function for all usersAnatolij Gustschin
There are several mdelay() definitions in the driver and board code. Remove them all and provide a common mdelay() in lib/time.c. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22checkpatch whitespace cleanupsStephen Warren
This avoids the following checkpatch warning in later patches: ERROR: "(foo*)" should be "(foo *)" ERROR: space required before the open brace '{' ERROR: space prohibited before that close parenthesis ')' ERROR: spaces required around that '||' (ctx:WxV) WARNING: space prohibited between function name and open parenthesis '(' WARNING: line over 80 characters This fixes all the white-space warnings/errors in my subsequent patch, and within this current patch. A number of other checkpatch warnings and errors are still present in this patch itself, but are beyond simple whitespace fixes, so are not solved by this patch. v2: New patch Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2011-10-22drivers: add the support for Silicon Image SATA controllerTang Yuantian
Add the Silicon Image series PCI Express to Serial ATA controller support, including Sil3132, Sil3131 and Sil3124. The SATA controller can be used to load kernel. The features list: - Supports 1-lane 2.5 Gbit/s PCI Express - Supports one/two/four independent Serial ATA channels - Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s - Supports LBA28 and LBA48 Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Aaron Williams <Aaron.Williams@cavium.com> Tested-by: Lan Chunhe <b25806@freescale.com>
2011-10-22doc/README: documents and readme for NDS32 archMacpaul Lin
Documents and READMEs for NDS32 architecture. It patch also provides usage of SoC AG101 and board ADP-AG101. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22adp-ag101: add board adp-ag101 supportMacpaul Lin
Add evaluation board "adp-ag101" configuration file adp-ag101.h. Add adp-ag101.c board config and related settings. Add board adp-ag101 into boards.cfg Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22nds32: common bdinfo, bootm, image supportMacpaul Lin
Add support of NDS32 to common commands bdinfo, bootm, and image format. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22nds32: standalone supportMacpaul Lin
Add standalone program related support for nds32 architecture. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22nds32/lib: add generic funcs in NDS32 libMacpaul Lin
Add Makefile, board.c, interrupts.c and bootm.c functions to nds32 architecture. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22nds32/ag101: cpu and init funcs of SoC ag101Macpaul Lin
SoC ag101 is the first chip using NDS32 N1213 cpu core. Add header file of device offset support for SoC ag101. Add main function of SoC ag101 based on NDS32 n1213 core. Add lowlevel_init.S and other periphal related code. This version of lowlevel_init.S also replace hardcode value by MARCO defines from the GPL version andesboot for better code quality. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22nds32/core N1213: NDS32 N12 core family N1213Macpaul Lin
Add N1213 cpu core (N12 Core family) support for NDS32 arch. This patch includes start.S for the initialize procedure of N1213. Start procedure: start.S will start up the N1213 CPU core at first, then jump to SoC dependent "lowlevel_init.S" and "watchdog.S" to configure peripheral devices. Signed-off-by: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2011-10-22nds32: add NDS32 support into common header fileMacpaul Lin
Add NDS32 support into common header file. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22nds32: add header files support for nds32Macpaul Lin
Add generic header files support for nds32 architecture. Cache, ptregs, data type and other definitions are included. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22cmd_bdinfo: replace print_str() with print_mhz()Timur Tabi
The print_str() helper function for cmd_bdinfo can print any string, but it is only used to print MHz values. Replace it with print_mhz() that takes a number and converts it to a string internally. Signed-off-by: Timur Tabi <timur@freescale.com>
2011-10-22gpio: Add PCA9698 40-bit I2C I/O portDirk Eibach
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
2011-10-22serial: pl01x: drain PL01x FIFO before baudrate changeLinus Walleij
Not draining the FIFO and waiting for the UART to be non-busy before changing baudrate results in crap characters on the console, so let's wait for the FIFO to drain and the last character to be clocked out before we do that. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-22examples: api: allow build with private libgccChe-liang Chiou
The examples/api is not configured with USE_PRIVATE_LIBGCC. This makes building examples/api break on certain boards that do not/cannot use the public libgcc. Nevertheless, this patch has to also touch the top-level Makefile to fix this problem because the current top-level Makefile does not specify libgcc as a prerequisite of examples/api, and explicitly builds examples/api _before_ libgcc. For testing this patch, I added the following to configs/seaboard.h and ran demo.bin on a Seaboard. +#define CONFIG_API +#define CONFIG_SYS_MMC_MAX_DEVICE 2 +#define CONFIG_CMD_NET +#define CONFIG_NET_MULTI Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22net: dc2114x: check for apropriate commandLinus Walleij
The code had two paths depending on whether the card was to be accessed from plain memory or the IO region. However the error path checks whether IO region was obtained - twice. Fix up the error path according to the probable intention. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-22km/common: enable "env default" for all keymile boardsGerlando Falauto
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
2011-10-22ftgmac100: reset fix when supports wake on lanMacpaul Lin
This patch move the reset function from initialization to driver register procedure. Some embedded system supports wake on lan nowadays. On this kind of system, the ftgmac100 will be still supplied power after the system has been shut-down by Linux. Hence the register used by linux won't be clear when the system has been powered-off. The origin ftgmac100 driver in u-boot will only register driver and functions to network stack and won't reset the ftgmac100 hardware if the network won't be used during boot-up. This will lead ftgmac100 continue receiving packets and then might corrupt linux kernel when booting up. So we reorder the hardware reset function earlier to force the hardware to be reset whether it will be used or not. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22km/common: remove obsolete header fileHolger Brunck
This header is unneeded due to code which was removed in the past. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de>
2011-10-22km/common: fix ramfs development targetAndreas Huber
Calucations of PRAM needs to take into account the 'rootfssize'. Memory available to the linux kernel 'mem=' is in all cases set to the total memory size minus the pram size. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de>
2011-10-22km/common: force set ethaddr only for KM kirkwood boardsHolger Brunck
This prevents u-boot to print out "Can't overwrite "ethaddr"" each time a powerpc board starts. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de>
2011-10-22fix compile warning for env toolsLuka Perkov
Patch fixes this issue: fw_env.c: In function ‘fw_setenv’: fw_env.c:492:5: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 3 has type ‘size_t’ [-Wformat] fw_env.c: In function ‘flash_write_buf’: fw_env.c:806:6: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 3 has type ‘size_t’ [-Wformat] Signed-off-by: Luka Perkov <lists@lukaperkov.net> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22km_arm: enable POST for these boardsValentin Longchamp
The current km_arm boards have a Power-On test jumper. When this jumper is set, this triggers some Power-On tests on the board. This patch enables the support of this jumper for starting the memory_regions test when the jumper is set. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Prafulla Wadaskar <prafulla@marvell.com>
2011-10-21removed static from images in cmd_bootm.cSimon Schwarz
This removes static modifier from images variable in cmd_bootm.c. Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
2011-10-21Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
* 'master' of git://git.denx.de/u-boot-mpc85xx: mpc85xx: Add inline GPIO acessor functions powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9) powerpc/85xx: Fix P2020DS booting powerpc/85xx: Update USB device tree status based on pin settings fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers powerpc/85xx: Add support for RMan LIODN initialization powerpc/85xx: Update device tree handling for SRIO powerpc/85xx: Update setting of SRIO LIODNs fm: Don't allow disabling of FM1-DTSEC1 fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
2011-10-21Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk
* 'master' of git://git.denx.de/u-boot-coldfire: ColdFire: Clean Makefile _config rules ColdFire: Move boards with simple _config rules to boards.cfg ColdFire: Fix compilation with CONFIG_SYS_DRAMSZ1 defined ColdFire: Merge differentiated linking files into a sigle one by board ColdFire: Add $(obj) before cpu lib to correct build ColdFire: Cleanup lds files for multiple defined symbols
2011-10-21Merge branch 'master' of /home/wd/git/u-boot/masterWolfgang Denk
* 'master' of /home/wd/git/u-boot/master: cosmetic: Fixup fixup_silent_linux() for checkpatch Correct dependency rule to fix SPL build Move timestamp and version files into 'generated' subdir sandbox: Makefile changes to build sandbox architecture Add generic gpio.h in asm-generic Adjust dependency rules to permit per-file flags sandbox: Use uintptr_t for 32/64-bit compatibility sandbox: Add basic config file sandbox: Add serial uart sandbox: Add main program sandbox: Add OS dependent layer sandbox: Force command sections to be 4-byte aligned sandbox: Disable standalone/API support sandbox: Disable built-in malloc sandbox: Add bootm support sandbox: Add board info for architecture sandbox: Add sandbox board sandbox: Add architecture lib files sandbox: Add cpu files sandbox: Add compiler defines to support a 64-bit x86_64 platform sandbox: Add architecture image support Fix use of int as pointer in image.c sandbox: Add architecture header files arm: ca9x4_ct_vxp: enable PXE BOOTP options support arm: ca9x4_ct_vxp: enable pxe command support Convert ca9x4_ct_vxp to standard env variables net: bootp: add PXE/RFC 4578 DHCP options support Add pxe command lib: add uuid_str_to_bin for use with bootp and PXE uuid README: document standard image variables Replace space and tab checks with isblank cosmetic: remove unneeded curly braces Add isblank common: add run_command2 for running simple or hush commands common, menu: use abortboot for menu timeout Add generic, reusable menu code DM9000:Add a byte swap macro for dm9000 io operation. kw_gpio: fix error in kw_gpio_direction_input Blackfin: bfin_spi: fix build error when DEBUG is defined Blackfin: define CONFIG_SYS_CACHELINE_SIZE video: Moving mx3fb.c to CONFIG_VIDEO mx31: make HSP clock for mx3fb driver available MX5: Make IPU display output and pixel format configurable VIDEO: MX5: export pix format VIDEO: MX5: Switch MX5 to CONFIG_VIDEO video: update the Freescale DIU driver to use linux/fb.h powerpc: cpm2 boards: update fcc register logic
2011-10-21mpc85xx: Add inline GPIO acessor functionsKyle Moffett
To ease the implementation of other MPC85xx board ports, several common GPIO helpers are added to <asm/mpc85xx_gpio.h>. Since each of these compiles to no more than 4-5 instructions it would be very inefficient to call them out of line, therefore we put them entirely in the header file. The HWW-1U-1A board port which these were written for strongly prefers to set multiple GPIOs as a single batch operation, so the API is designed around that basis. To assist other board ports, a small set of wrappers are used which provides a standard gpio_request() interface around the MPC85xx-specific functions. This can be enabled with CONFIG_MPC85XX_GENERIC_GPIO Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-20powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)Timur Tabi
The work-around for P4080 erratum SERDES9 says that the SERDES receiver lanes should be reset after the XAUI starts tranmitting alignment signals. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-20cosmetic: Fixup fixup_silent_linux() for checkpatchDoug Anderson
Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Anton Staaf <robotboy@chromium.org>
2011-10-18Correct dependency rule to fix SPL buildSimon Glass
Commit 4750884 introduced a change in the dependency generation which breaks SPL, because the source files being built are not initially present and are symlinked as part of the build. The .depend file must depend not only on the files in the DEPS list but also on the sources which did not contribute files to the DEPS list, since these sources will otherwise not get a dependency and will not be built. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Wolfgang Denk <wd@denx.de>
2011-10-19ColdFire: Clean Makefile _config rulesstany MARCEL
Remove unused mkdir, and add missing ones. Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
2011-10-19ColdFire: Move boards with simple _config rules to boards.cfgstany MARCEL
Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
2011-10-19ColdFire: Fix compilation with CONFIG_SYS_DRAMSZ1 definedstany MARCEL
A temp variable was used but not declared, with CONFIG_SYS_DRAMSZ1 defined. This variable is now declared in the functione when needed. Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
2011-10-19ColdFire: Merge differentiated linking files into a sigle one by boardstany MARCEL
The spa, stm, int, 32 and 16 linking files are identical so there is no need to differentiate them. A single lds file is now used, and _config rule are simplified. Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
2011-10-19ColdFire: Add $(obj) before cpu lib to correct buildstany MARCEL
Missing $(obj) prevented the build of ColdFire boards in a directory than sources Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
2011-10-19ColdFire: Cleanup lds files for multiple defined symbolsstany MARCEL
Lds files cleened to remove multiple defined section and modified to be compliant with --gc-sections added for ColdFire platform in a previous patch. Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit (git 2.34.1) at 2024-12-27 04:13:24 +0000