summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-31imx: add status reporting for HAB statusStefano Babic
Add functions to report the HAB (High Assurance Boot) status of e.g. i.MX6 CPUs. This is taken from git://git.freescale.com/imx/uboot-imx.git branch imx_v2009.08_3.0.35_4.0.0 cpu/arm_cortexa8/mx6/generic.c include/asm-arm/arch-mx6/mx6_secure.h Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31tools: add support for setting the CSF into imximageStefano Babic
Add support for setting the CSF (Command Sequence File) pointer which is used for HAB (High Assurance Boot) in the imximage by adding e.g. CSF 0x2000 in the imximage.cfg file. This will set the CSF pointer accordingly just after the padded data image area. The boot_data.length is adjusted with the value from the imximage.cfg config file. The resulting u-boot.imx can be signed with the FSL HAB tooling. The generated CSF block needs to be appended to the u-boot.imx. Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31tools: add padding of data image file for imximageStefano Babic
Implement function vrec_header to be able to pad the final data image file according the what has been calculated for boot_data.length. Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31tools: add variable padding of data image in mkimageStefano Babic
Use previously unused return value of function vrec_header to return a padding size to generic mkimage. This padding size is used in copy_files to pad with zeros after copying the data image. Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31tools: dynamically allocate imx_header in imximageStefano Babic
Change to dynamically allocate the imx_header to correctly allocate the IVT, Boot Data and DCD at correct locations depending on the boot media. Also check that the Image Vector Table Offset + IVT + Boot Data + DCD <= Initial Load Region Size. Previously struct imx_header was always 4096 bytes and was not dealing correctly with the Image Vector Table Offset. Now, the memory allocation looks for e.g. SD boot like this Storage u-boot.imx RAM Device 00000000 177ff000 <-------------- | 00000400 00000000 d1 00 20 40 IVT.header 177ff400 <------- | 00000404 00000004 00 00 80 17 IVT.entry 177ff404 ----------- | 00000408 00000008 00 00 00 00 IVT.reserved1 177ff408 | | | 0000040C 0000000C 2c f4 7f 17 IVT.dcd 177ff40C ------ | | | 00000410 00000010 20 f4 7f 17 IVT.boot 177ff410 ---- | | | | 00000414 00000014 00 f4 7f 17 IVT.self 177ff414 -------- | | 00000418 00000018 00 00 00 00 IVT.csf 177ff418 | | | | 0000041C 0000001C 00 00 00 00 IVT.reserved2 177ff41C | | | | 00000420 00000020 00 f0 7f 17 BootData.start 177ff420 <--- | | --- 00000424 00000024 00 60 03 00 BootData.length 177ff424 | | 00000428 00000028 00 00 00 00 BootData.plugin 177ff428 | | 0000042C 0000002C d2 03 30 40 DCD.header 177ff42C <----- | ... | 00001000 00000c00 13 00 00 ea U-Boot Start 17800000 <---------- While at it also remove the unused #define HEADER_OFFSET. Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31tools: rename mximage_flash_offset to imximage_ivt_offsetStefano Babic
This better reflects the naming from the Reference Manual as well as fits better since "flash" is not really applicabe for SATA. Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31tools: imx_header should not include flash_offsetStefano Babic
Doing a make distclean; make mx6qsabresd_config; make and hexdump -C u-boot.imx | less ... 00000360 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000003f0 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 |................| ^^^^^^^^^^^ 00000400 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00001000 13 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |...ê.ð.å.ð.å.ð.å| ... shows the flash_offset value being written into the final generated image, wich is not correct. Instead create flash_offset as static variable such that the generated image is "clean". 00000360 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00001000 13 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |...ê.ð.å.ð.å.ð.å| Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-28siemens-am33x-common.h: Always build CONFIG_OMAP_GPIO supportTom Rini
The MMC driver relies on this block now. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28arm, am335x: add support for 3 siemens boardsHeiko Schocher
add support for the am335x based boards from siemens: dxr2: - DDR3 128MiB - NAND 256MiB - Ethernet with external Switch SMSC LAN9303 - no PMIC - internal Watchdog - DFU support pxm2: - DDR2 512 MiB - NAND 1024 MiB - PMIC - PHY atheros ar803x - USB Host - internal Watchdog - DFU support rut: - DDR3 256 MiB - NAND 256 MiB - PMIC - PHY natsemi dp83630 - external Watchdog - DFU support Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Roger Meier <r.meier@siemens.com> Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Pascal Bach <pascal.bach@siemens.com> Cc: Tom Rini <trini@ti.com>
2013-08-28video: add formike lcd panel initHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Anatolij Gustschin <agust@denx.de>
2013-08-28arm, am335x: add watchdog supportHeiko Schocher
Add TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog support. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2013-08-28arm, spl: add watchdog library to SPLHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
2013-08-28arm, am335x: add some missing registers and defines for lcd and epwm supportHeiko Schocher
- add missing register defines in struct cm_perpl epwmss0clkctrl epwmss2clkctrl lcdcclkstctrl - add missing register defines in struct cm_dpll clklcdcpixelclk - add struct pwmss_regs - add struct pwmss_ecap_regs - add LCD Controller base LCD_CNTL_BASE - add PWM0 controller base PWMSS0_BASE Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
2013-08-28arm, am33xx: add defines for gmii_sel_register bitsHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
2013-08-28dra7xx_evm: Re-order and comment the networking related config optionsTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28omap5_uevm: Better comment why we have TCA642X and the reset timeTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28TI:omap5: Clarify comments about SPL and DDR timings in common configTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28TI:am33xx: Move SPL YMODEM support to the per-board configTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28am335x_evm: Update README for customizationTom Rini
As this is a reference platform, update the README to note which IP blocks are required for use due to design choices of the reference rather than required by the SoC itself. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28TI:armv7: Re-order slightly the generic CONFIG options, expand related commentsTom Rini
Re-group the general options to note things that can be removed safely to reduce binary size when not required, and expand the comment about what commands we do include to note it could be replaced with a specific list of required one. While at it, move the CMD parts of various blocks IP to the end of the list for consistency. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28am335x_evm: Regroup USB optionsTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28am335x_evm: Add comment by SPL SPI supportTom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28TI:am335x: Better comment and organize the networking related optionsTom Rini
While in here, drop CONFIG_BOOTP_DEFAULT as it is unused in the code. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon SRAM_SCRATCH_SPACE_ADDRTom Rini
After examining both TRMs and doing some experimentation, we can rely on using the start of the download area for CONFIG_SPL_TEXT_BASE and then move SRAM_SCRATCH_SPACE_ADDR up, just like am335x. This is required for peripheral boot modes such as UART. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28TI:armv7: Move CONFIG_SPL_LIBDISK_SUPPORT to MMC sectionTom Rini
We only need this library when we're doing "disk" access to MMC/SD. Update comment around the rest of CONFIG_SPL_LIB* to note that the others are always required. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28am33xx: Correct and expand comments on CONFIG_SPL_MAX_SIZETom Rini
We had been allowing the max size to be larger than actually allowed by the ROM. Expand the commentary here to explain why we set these locations. Signed-off-by: Tom Rini <trini@ti.com>
2013-08-28ARM: igep00x0.h: Enable raw initrd supportJavier Martinez Canillas
Now that IGEP base boards default environment use the bootz command to boot a zImage instead of a uImage, it makes sense to add support to supply a raw initrd image to the kernel if needed. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2013-08-28arm: omap3: fix SRAM copy and execution sequenceAlbert ARIBAUD
Fix size calculation in copy of go_to_speed into SRAM. Use SRAM_CLK_CODE in call to SRAM-based go_to_speed. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-08-28ARM: OMAP4460: sdp: Limit TPS mux config to 4460Taras Kondratiuk
TPS mux config is 4460 specific, so it should be limited to 4460 only. Signed-off-by: Taras Kondratiuk <taras@ti.com>
2013-08-28ARM: OMAP4470: Add Elpida EDB8164B3PF memory configurationLubomir Popov
OMAP4470 SDP SoM has EDB8164B3PF PoP memory on board. This memory has 4Gb x 2CS = 8Gb configuration. Add configuration for runtime calculation and precalculated cases. Patch is based on a draft Lubomir's patch [1]. [1] http://lists.denx.de/pipermail/u-boot/2013-April/150851.html Signed-off-by: Lubomir Popov <lpopov@mm-sol.com> [taras@ti.com: cleaned up patch and fixed precalculated values] Signed-off-by: Taras Kondratiuk <taras@ti.com>
2013-08-28ARM: OMAP4470: Add voltage and dpll dataTaras Kondratiuk
OMAP4470 reference design uses TWL6032 PMIC with a following connection scheme: VDD_CORE = TWL6032 SMPS2 VDD_MPU = TWL6032 SMPS1 VDD_IVA = TWL6032 SMPS5 Set voltage and frequency values according to OMAP4470 Data Manual Operating Condition Addendum v0.7 Signed-off-by: Taras Kondratiuk <taras@ti.com>
2013-08-28ARM: OMAP4470: Add OMAP4470 identificationTaras Kondratiuk
Signed-off-by: Taras Kondratiuk <taras@ti.com>
2013-08-28sdp4430: Initialize board id using CONFIG_MACH_TYPEOleksandr Tyshchenko
Use CONFIG_MACH_TYPE generic macro to set the machine type number in the common arm code instead of setting it in the board code. Signed-off-by: Oleksandr Tyshchenko <oleksandr.tyshchenko@ti.com>
2013-08-27omap5: Correct include order, drop CONFIG_SYS_PROMPT defineTom Rini
With the new include structure for TI platforms, we need to not define our own CONFIG_SYS_PROMPT and also need to include <configs/omap5_common.h> much sooner, so do both of these. Also drop the unused CONFIG_NET_MULTI Signed-off-by: Tom Rini <trini@ti.com>
2013-08-27Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2013-08-27i2c: fix i2c dev command for not using new frameworkHeiko Schocher
i2c dev command does not work anymore for legacy drivers because a check is executed that is valid only in the new framework. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Stefano Babic <sbabic@denx.de>
2013-08-26console: usb: kbd: To fix slow TFTP bootingJim Lin
TFTP booting is slow when a USB keyboard is installed and stdin has usbkbd added. This fix is to change Ctrl-C polling for USB keyboard to every second when NET transfer is running. My previous patch is expected to be put into usb_kbd_testc(). But it went into usb_kbd_getc() after applied. This patch is to put change in correct place. Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26console: usb: kbd: To improve TFTP booting performanceJim Lin
TFTP booting is slow when a USB keyboard is installed and stdin has usbkbd added. This fix is to change Ctrl-C polling for USB keyboard to every second when NET transfer is running. Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26NET: Add net_busy_flag if CONFIG_USB_KEYBOARD is definedJim Lin
This flag is to make console aware that NET transfer is running or not. Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26usb: ehci-mx5: Use 'bool' instead of 'unsigned char'Fabio Estevam
The 'enable' argument can be better expressed as boolean. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2013-08-26usb: ehci-mx5: Remove unneeded write to cscmr1 registerFabio Estevam
Currently we have the following behavior in ehci_hcd_init() - Read csmr1 register, clear bit 26 and then set bit 26. However a little bit later we call set_usb_phy_clk() which clears bit 26, so let's get rid of the unnecessary code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-08-26usb:dfu:g_dnl: Refactoring the string definition code for g_dnl driverLukasz Majewski
The manufacturer and product IDs are dynamically assigned when gadget is bind. Now the IDs aren't assigned at struct g_dnl_string_defs definition. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: "Egli, Samuel" <samuel.egli@siemens.com>
2013-08-26usb:dfu:g_dnl: Change number of exported configurations at composite gadgetLukasz Majewski
USB composite gadget (g_dnl) supports only one configuration. Due to that the corresponding field - bConfigurationValue has been changed. Moreover more descriptive names were chosen for relevant fields. Windows XP setup: - Thesyscon USB Descriptor Dumper - zadig_xp program for WinUSB installation (which is required by dfu-util) - dfu-util for windows (version 0.6) - TRATS target connected via USB hub to test Win XP machine. Tested at: Trats - Exynos4210 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: "Egli, Samuel" <samuel.egli@siemens.com>
2013-08-26dfu, nand, ubi: add partubi alt settings for updating ubi partitionHeiko Schocher
updating an ubi partition needs a completely erased mtd partition, see: http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html So, add partubi alt setting for the dfu_alt_info environment variable to mark this partition as an ubi partition. In case we update an ubi partition, we erase after flashing the image into the partition, the remaining sektors. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Scott Wood <scottwood@freescale.com>
2013-08-26usb: Use well-known descriptor sizes when parsing configurationJulius Werner
The existing USB configuration parsing code relies on the descriptors' own length values when reading through the configuration blob. Since the size of those descriptors is always well-defined, we should rather use the known sizes instead of trusting device-provided values to be correct. Also adds some safety to potential out-of-order descriptors. Change-Id: I16f69dfdd6793aa0fe930b5148d4521f3e5c3090 Signed-off-by: Julius Werner <jwerner@chromium.org>
2013-08-26ARM: OMAP5-uevm: Add usb device reset APIDan Murphy
Add the call back to reset the LAN9730 after the FEAT_POWER has been called. Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26USB: usb-hub: Add a weak function for resetting devicesDan Murphy
Add a __weak function that can be overridden to reset devices attached to an ehci devices after the FEAT_POWER has been submitted Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26ARM: OMAP5-uevm: Add USB MAC ethernet addressDan Murphy
Set the usbethaddr based on the OMAP DIE_ID registers which should be unique for each processor. Then set this as the usb ethernet MAC address. Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26ARM: OMAP5-uevm: Add USB ehci support for the uEVMDan Murphy
Add the USB ehci support for the OMAP5 uEVM. Configure the uEVM mux data Add the flags to build the appropriate modules Add the usb call backs to initialize the EHCI controller Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26ARM: OMAP: USB: Fix linker error when ULPI is not definedDan Murphy
Fix the linker error for missing ulpi_reset when ulpi is not defined in the board config. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Marek Vasut <marex@denx.de>
generated by cgit (git 2.34.1) at 2024-12-24 12:14:02 +0000