summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-24clk: set flags in the ccf registration routinesDario Binacchi
The top-level framework flags are passed as parameter to the common clock framework (ccf) registration routines without being used. Checks of the flags setting added by the patch have been added in the ccf test. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-08-24dm: test: clk: add the test for the ccf gated clockDario Binacchi
Unlike the other clock types, in the case of the gated clock, a new driver has been developed which does not use the registering routine provided by the common clock framework. The addition of the ecspi0 clock to sandbox therefore allows testing the ccf gate clock. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-24clk: imx6: Add definition for IMX6QDL_CLK_ENET_REF clockLukasz Majewski
After commit 673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all NXP boards, which are not IMX8 and in the same time are supporting CCF need to provide PTP clock. On the i.MX6Q this clock is provided with IMX6QDL_CLK_ENET_REF in the Linux kernel's CCF. Code in this change models the simplest case when enet reference clock is generated from 'osc' clock. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: imx: Add support for pllv3 enet clockLukasz Majewski
This code has been ported from Linux kernel v5.5.5 (tag) and has been adjusted to U-Boot's DM. It adds support for correct recognition of IMX_PLLV3_ENET flag in the clk-pllv3.c driver. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: imx6: Add definition for IMX6QDL_CLK_ENET clockLukasz Majewski
After commit 673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all NXP boards, which are not IMX8 and in the same time are supporting CCF need to provide IMX6QDL_CLK_ENET. This change defines the missing clock in i.MX6Q's CCF. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-08-24clk: ICS8N3QV01 remove superfluous codeHeinrich Schuchardt
Do not calculate a unused value of n which is overwritten in both branches of the subsequent if statement. Identified by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-08-23Merge tag 'dm-pull-22aug20' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm replace devfdt_get_addr_ptr() with dev_read_addr_ptr() binman fixes for portage various minor fixes 'bind' command improvements
2020-08-23Merge branch '2020-08-21-stdio-cleanup'Tom Rini
- Clean up common/stdio.c and migrate some related options to Kconfig
2020-08-23stdio: Tidy up the coding styleSimon Glass
Bring the coding style in this file up to the current level. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23stdio: Drop brackets around &devs.listSimon Glass
These brackets are not needed. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23stdio: Update to use compiler for Kconfig checksSimon Glass
Drop use of the preprocessor where possible. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23stdio: Drop #ifdefs in the header fileSimon Glass
These prevent the use of IS_ENABLED() and are unnecessary. Drop them and fix a few code-style nits nearby. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEVSimon Glass
Now that this is in Kconfig we can move the logic at the top of the file to Kconfig, and use if() instead of #if. Update the file with these changes. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23Convert CONFIG_SYS_DEVICE_NULLDEV to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_DEVICE_NULLDEV Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23moveconfig: Skip binary and ELF filesSimon Glass
Add a few more file extensions to the list of files that should not be processed. This avoids unicode errors, for example. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23Convert CONFIG_NETCONSOLE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NETCONSOLE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-22sandbox: u-boot.lds: Remove bogus __bss_start symbolOvidiu Panait
The sections described in the sandbox linker script are inserted before data section via "INSERT BEFORE .data;". Running readelf -S on sandbox u-boot binary shows that the bss section is located after the data section: Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [25] .u_boot_list PROGBITS 000000000041d1c8 0021d1c8 000000000000dd90 0000000000000000 WA 0 0 8 [26] _u_boot_sandbox_g PROGBITS 000000000042af58 0022af58 00000000000000a0 0000000000000000 WA 0 0 8 [27] .data PROGBITS 000000000042b000 0022b000 000000000000f708 0000000000000000 WA 0 0 32 [28] .bss NOBITS 000000000043a720 0023a708 0000000000018930 0000000000000000 WA 0 0 32 This means that the __bss_start assignment in the linker script is bogus, as the actual bss section start is located elsewhere. Remove this assignment, as the __bss_start symbol is not used on sandbox anyway. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-22board_f: Remove dead code from init_func_i2cOvidiu Panait
Since commit 69153988a6f4 ("i2c: Finish dropping use of CONFIG_I2C_HARD") init_func_i2c is wrapped only by "#if defined(CONFIG_SYS_I2C)". Because of this, the second ifdef within becomes pointless: #if defined(CONFIG_SYS_I2C) static int init_func_i2c(void) <snip> #ifdef CONFIG_SYS_I2C ... #else ... #endif <snip> } #endif Remove the dead #else preprocessor code. Fixes: 69153988a6f ("i2c: Finish dropping use of CONFIG_I2C_HARD") Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-22binman: Add a setup script for PythonSimon Glass
Allow binman to be installed by adding a suitable setup.py script. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-22dtoc: Add a setup script for PythonSimon Glass
Allow dtoc to be installed by adding a suitable setup.py script. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-22binman: Correct some import statementsSimon Glass
Some of these were not converted when binman moved to use absolute paths. Fix them. Also drop the import of 'test' which is a directory, not a module. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-22binman: Move GetEntryModules() to controlSimon Glass
When binman is installed its main program is in a different directory to its modules. This means that __file__ is different and we cannot use it to obtain the path to etype/ from main.py To fix this, move the function to the 'control' module, since it is installed with all the other modules, including the etype/ directory. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-22treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()Masahiro Yamada
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To help this tedious work, this commit converts devfdt_get_addr_ptr() to dev_read_addr_ptr() by coccinelle. I also removed redundant casts because dev_read_addr_ptr() returns an opaque pointer. To generate this commit, I ran the following semantic patch excluding include/dm/. <smpl> @@ type T; expression dev; @@ -(T *)devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) @@ expression dev; @@ -devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22ata: mvebu: use dev_read_addr() to get base addressMasahiro Yamada
It is strange to use devfdt_get_addr_ptr(), then cast the pointer back to ulong because you could use devfdt_get_addr() without casting. Convert it to dev_read_addr(), which is capable to CONFIG_OF_LIVE. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-22gpio: at91: use dev_read_addr() to get base addressMasahiro Yamada
It is strange to use devfdt_get_addr_ptr(), then cast the pointer back to uint32 because you could use devfdt_get_addr() without casting. Convert it to dev_read_addr(), which is capable to CONFIG_OF_LIVE. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22test: dm: Add test case for devfdt_get_addr_ptrOvidiu Panait
Add flat tree test case to cover devfdt_get_addr_ptr function. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22dm: core: Fix devfdt_get_addr_ptr return valueOvidiu Panait
According to the description of devfdt_get_addr_ptr, this function should return NULL on failure, but currently it returns (void *)FDT_ADDR_T_NONE. Fix this by making devfdt_get_addr_ptr return NULL on failure, as described in the function comments. Also, update the drivers currently checking (void *)FDT_ADDR_T_NONE to check for NULL. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22doc: add bind/unbind command documentationPatrice Chotard
Add documentation in doc/drivel-model for the bind/unbind command. Part of this documentation is extracted from original patch commit message: commit 49c752c93a78 ("cmd: Add bind/unbind commands to bind a device to a driver from the command line") Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22test/py: Update test_bindPatrice Chotard
As bind-test is now binded at sandbox startup and no more by test_bind.py, bind-test nodes are not located at the end of "dm tree" output, but can be located everywhere in the tree, so bind-test output could either be: simple_bus 0 [ ] generic_simple_bus |-- bind-test phy 0 [ ] phy_sandbox | |-- bind-test-child1 simple_bus 1 [ ] generic_simple_bus | `-- bind-test-child2 or: simple_bus 5 [ ] generic_simple_bus `-- bind-test phy 2 [ ] phy_sandbox |-- bind-test-child1 simple_bus 6 [ ] generic_simple_bus `-- bind-test-child2 in_tree() function need to be updated to take care of that change. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22sandbox: dts: Add compatible string for bind-test nodePatrice Chotard
Usage of lists_bind_fdt() in bind command imposes to add a compatible string for bind-test node. Others impacts are: - bind-test node is binded at sandbox start, so no need to bind it in test_bind_unbind_with_node() test. - As explained just above, after sandbox start, now a phy exist. In test/dm/phy.c, it was verified that a third phy didn't exist, now we must verified that a fourth phy doesn't exist. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22sandbox: phy: add driver_data for bind test cmdPatrice Chotard
Add driver data to existing compatible string "sandbox,phy". Add an additional compatible string without driver_data This will verify that bind command parses, finds and passes the correct driver data to device_bind_with_driver_data() by using driver_data in the second sandbox_phy_ids table entry. In sandbox_phy_bind() a check is added to validate driver_data content. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22cmd: bind: allow to bind driver with driver dataPatrice Chotard
Initial implementation invokes device_bind_with_driver_data() with driver_data parameter equal to 0. For driver with driver data, the bind command can't bind correctly this driver or even worse causes data abort as shown below: As example, for debug purpose on STM32MP1 platform, ethernet (dwc_eth_qos.c) driver needed to be unbinded/binded. This driver is using driver data: static const struct udevice_id eqos_ids[] = { { .compatible = "nvidia,tegra186-eqos", .data = (ulong)&eqos_tegra186_config }, { .compatible = "snps,dwmac-4.20a", .data = (ulong)&eqos_stm32_config }, { } }; After unbinding/binding this driver and probing it (with the dhcp command), we got a prefetch abort as below: STM32MP> unbind eth ethernet@5800a000 STM32MP> bind /soc/ethernet@5800a000 eth_eqos STM32MP> dhcp prefetch abort pc : [<4310801c>] lr : [<ffc8f4ad>] reloc pc : [<035ba01c>] lr : [<c01414ad>] sp : fdaf19b0 ip : ffcea83c fp : 00000001 r10: ffcfd4a0 r9 : fdaffed0 r8 : 00000000 r7 : ffcff304 r6 : fdc63220 r5 : 00000000 r4 : fdc5b108 r3 : 43108020 r2 : 00003d39 r1 : ffcea544 r0 : fdc63220 Flags: nZCv IRQs off FIQs off Mode SVC_32 Code: data abort pc : [<ffc4f9c0>] lr : [<ffc4f9ad>] reloc pc : [<c01019c0>] lr : [<c01019ad>] sp : fdaf18b8 ip : 00000000 fp : 00000001 r10: ffcd69b2 r9 : fdaffed0 r8 : ffcd69aa r7 : 00000000 r6 : 00000008 r5 : 4310801c r4 : fffffffc r3 : 00000001 r2 : 00000028 r1 : 00000000 r0 : 00000006 Flags: NzCv IRQs on FIQs on Mode SVC_32 (T) Code: 2f00 d1e9 2c00 dce9 (f855) 2024 Resetting CPU ... Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22dm: fix ofnode_read_addr/size_cells()Heinrich Schuchardt
In the case of the live tree ofnode_read_addr_cells() and ofnode_read_size_cells() return the #address-cells and #size-cells defined in the parent node. With the patch the same is done for a non-live tree. The only consumer of these functions is currently the CFI flash driver. This patch fixes the incorrect parsing of the device tree leading to 'saveenv' failing on qemu_arm64_defconfig. For testing qemu-system-aarch64 has to be called with -drive if=pflash,format=raw,index=1,file=envstore.img to provide the flash memory. envstore.img must be 64 MiB large. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-08-21rockchip: firefly-rk3288: Fix the code support for SPL_LEDKever Yang
Fix the build error for the wrong code when CONFIG_SPL_LED is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-08-21rockchip: rk3188: Fix the code support for SPL_LEDKever Yang
Fix the build error for the wrong code when CONFIG_SPL_LED is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-08-21rockchip: config: evb-rk3399: Add rockchip dwmmc supportKever Yang
This enable support for SD card on evb-rk3399. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-08-21rockchip: dts: rk3399-evb: add sdmmc nodeKever Yang
The sdmmc node is missing after the dts sync patch: 167efc2c7a arm64: dts: rk3399: Sync v5.7-rc1 from Linux But we still need it for boot from SD card, so add it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-08-20Merge tag 'xilinx-for-v2020.10-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.10-rc3 - Fix fdtfile variable setup - Fix bootm_*/fdt_high/initrd_high variables handling - Fix Kconfig dependencies for Xilinx drivers - Fix booting u-boot from lowest memory - Fix firmware payload argument count for Versal - Fix dfu configurations - Fix mio_bank property handling - Fix and align code around ID detection - Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG - Simplify logic around reading MAC from eeprom - Decrease malloc length for zynqmp mini qspi - Enable preboot for ZynqMP and Versal i2c: - Fix i2c eeprom partitions handling mmc: - Fix logic around HS mode enabling and use proper functions
2020-08-20Merge branch '2020-08-19-mediatek-updates'Tom Rini
- Assorted updates for MediaTek platforms
2020-08-20clk: versal: Move pm_query_id out of clock driverMichal Simek
There is no reason to have firmware specific structure in clock driver. Move it to generic location and also initialize enum values which is based on https://lore.kernel.org/linux-arm-kernel/20200318125003.GA2727094@kroah.com/ recommended way to go to make sure that values guaranteed by compiler. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: sdhci: Use upper/lower_32_bits macrosMichal Simek
Instead of recasting and shifting use macros which are designed for taking upper/lower 32bit value from 64bit variable. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20mmc: sdhci: Enable high speed conditional on the corresponding bitFaiz Abbas
The capabilities register has a field to indicate whether the host supports high speed mode or not. Add high speed host_caps based on this bit instead of enabling it by default. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Michal Simek <michal.simek@xilnx.com> Tested-by: Michal Simek <michal.simek@xilnx.com> (zcu104 with sdhci-caps-mask = <0 0x200000>;)
2020-08-20xilinx: common: Change bootm_size variable settingMichal Simek
Linux kernel for arm32 requires dtb and initrd to be placed in low memory to work properly. This requirement is described in chapter 4b) and 5) in Linux documentation (Documentation/arm/booting.rst). There is an issue on arm32 with 2GB of memory that bootm_size is bigger than Linux lowmem (for example with VMSPLIT_3G). That's why limit bootm size on these systems not to be above 768MB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: common: Check return value from variable setupMichal Simek
env_set..() can failed that's why check return status and report it back to make sure that user is aware that's something went wrong. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: common: Get rid of initrd_high variable setupMichal Simek
When bootm_low/bootm_size are setup properly there is no need to setup any initrd_high address. Location for initrd is determined through LMB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: common: Get rid of fdt_high variableMichal Simek
There is no need to setup this variable if bootm_low and bootm_size variable are properly setup. If fdt_high variable is missing U-Boot is asking LMB to return free memory which is not used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: Change logic around zynq_board_read_rom_ethaddr()Michal Simek
There is no reason to build private function when CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET is not defined. There is already weak function which handles default case properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIGMichal Simek
Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating variables with run time information. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: versal: Enable i2c misc eeprom driverMichal Simek
Enable this driver to be able to work with i2c based eeproms on Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-10 02:42:49 +0000