summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-26video: add anx6345 DM driverVasily Khoruzhick
This is a eDP bridge similar to ANX9804, it allows to connect eDP panels to the chips that can output only parallel signal Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: fixed most checkpatch errors/warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-26video: anx9804: split out registers definitions into a separate headerVasily Khoruzhick
This header will be used in anx6345 driver Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: moved header to drivers/video] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-26dm: video: bridge: add operation to read EDIDVasily Khoruzhick
Add an operation to read EDID, since bridge may have ability to read EDID from the panel that is connected to it, for example LCD<->eDP bridge. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2017-10-26sunxi: setup simplefb for Allwinner DE2Icenowy Zheng
As the support of EFI boot on Allwinner H3 is broken, we still need to use simplefb to pass the framebuffer to Linux. Add code to setup simplefb for Allwinner DE2 driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-26video: add an option for video simplefb via DTIcenowy Zheng
Add an option to indicate that the video driver should setup a SimpleFB node that passes the video framebuffer initialized by U-Boot to the operating system kernel. Currently only the Allwinner DE driver uses this option, and the definition of this option in the sunxi-common.h config header is converted to an imply of this option from CONFIG_VIDEO_SUNXI. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-26video: sunxi: extract simplefb match code to a new fileIcenowy Zheng
As the DE2 simplefb setup code can also benefit from the simplefb match code, extract it to a new source file. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-26sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXIIcenowy Zheng
The sunxi DE1 video option used to be CONFIG_VIDEO, which has the same name as the "Enable legacy video support" option in drivers/video/Kconfig. Change the option name to CONFIG_VIDEO_SUNXI, which is really used by Makefile under drivers/video/sunxi/, and defined in sunxi-common.h when CONFIG_VIDEO is selected before this change. Now CONFIG_VIDEO_SUNXI selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig and config headers are all converted to use CONFIG_VIDEO_SUNXI. Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2017-10-23Kconfig: add CONFIG_BROKENHeinrich Schuchardt
Provide a Kconfig option that we can use as dependency for features that are broken. This allows to easily disable them without removing the code. As no short text is supplied the option will not appear in menuconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-23doc: verified-boot: fix crypto algorithm examplesMasahiro Yamada
As you see in crypto_algos in common/image-sig.c, the algorithm should be either "rsa2048" or "rsa4096". "rs2048" is a typo. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-23tools: image: fix node name of signature node in FITMasahiro Yamada
Both "conf_name" and "sig_name" point to the name of config node. The latter should be the name of the signature node. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-23test/py: fix typos in README.mdMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2017-10-23cmd: gpt: solve issue for swap and rename commandPatrick Delaunay
don't use prettyprint_part_size() in create_gpt_partitions_list() that avoid to align offset and size to 1 MiB and increase precision for start and size. This patch avoid the risk to change partition size and lost data during rename or swap. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2017-10-23test/py: gpt: test start LBA for sub-command rename and swapPatrick Delaunay
Add test of first and last LBA in gpt for rename and swap. Only the name is expected to change, so test 3 columns for part command 1: first LBA (start) 2: last LBA (end) 3: partition name After rename, the last LBA change and it is a error in current U-Boot code + "first" = 0x7ff : invalid value (<start) + "second" = 0x17ff => size increasing ! Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-10-23test/py: gpt: add test for sub-command writePatrick Delaunay
+ test write for one partition on all the device (size=0) + test write with disk uuid and 2 partitions Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-10-23disk: efi: correct the overlap check on GPT header and PTEPatrick Delaunay
the partition starting at 0x4400 is refused with overlap error: $> gpt write mmc 0 "name=test,start=0x4400,size=0" Writing GPT: Partition overlap error! even if the 0x4400 is the first available offset for LBA35 with default value: - MBR=LBA1 - GPT header=LBA2 - PTE= 32 LBAs (128 entry), 3 to 34 And the command to have one partition for all the disk failed also : $> gpt write mmc 0 "name=test,size=0" After the patch : $> gpt write mmc 0 "name=test,size=0" Writing GPT: success! $> part list mmc 0 Partition Map for MMC device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000022 0x01ce9fde "test" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 type: data guid: b4b84b8a-04e3-4000-0036-aff5c9c495b1 And 0x22 = 34 LBA => offset = 0x4400 is accepted as expected Reviewed-by: Łukasz Majewski <lukma@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-10-23test/py: gpt: add test for sub-command read and verifyPatrick Delaunay
add sandbox test for some gpt sub-command - gpt read / part list : read the gpt partition created by sgdisk on host test start, size, LBA and name output - gpt verify : verify the gpt partition create by sgdisk on host PS: persistent data test_gpt_disk_image.bin are udpated Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-10-23test/py: gpt: copy persistent filePatrick Delaunay
copy the persistent gpt binary file as it can be modified during the test that avoid issue if the test fail: the test always restart with clean file Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2017-10-23rtc: mc146818: Correct alarm message for day alarmBin Meng
RTC_CONFIG_D register contains the day within the month to generate an alarm, not the month. This corrects the printf to indicate it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-23chiliboard config: use CONFIG_DEFAULT_FDT_FILE as env variableMichal Oleszczyk
Remove hardcoded ftd file name from environment variables. Use CONFIG_DEFAULT_FDT_FILE macro instead. Signed-off-by: Michal Oleszczyk <m.oleszczyk@grinn-global.com>
2017-10-23simple-bus: remove DECLARE_GLOBAL_DATA_PTRMasahiro Yamada
No global pointer is used in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-23mtd: remove MTDDEBUG() and CONFIG_MTD_DEBUGMasahiro Yamada
All users of this macro have been converted. Remove MTDDEBUG and related CONFIG options. ubifs_dbg_msg_key() is kept. It is silent unless DEBUG is defined. I am not touching scripts/config_whitelist.txt. The deprecated options will be dropped by the next resync. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23mtd: replace MTDDEBUG() with pr_debug()Masahiro Yamada
In old days, the MTD subsystem in Linux had debug facility like DEBUG(MTD_DEBUG_LEVEL1, ...). They were all replaced with pr_debug() until Linux 3.2. See Linux commit 289c05222172 ("mtd: replace DEBUG() with pr_debug()"). U-Boot still uses similar macros. Covert all of them for easier sync. Done with the help of Coccinelle. The semantic patch I used is as follows: // <smpl> @@ expression e1, e2; @@ -MTDDEBUG(e1, e2) +pr_debug(e2) @@ expression e1, e2; @@ -MTDDEBUG(e1, e2, +pr_debug(e2, ...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-22Merge git://git.denx.de/u-boot-uniphierTom Rini
2017-10-23ARM: uniphier: use pr_*() more where appropriateMasahiro Yamada
Commit dd74b945af2e ("ARM: uniphier: use pr_() instead of printf() where appropriate"), but I missed to update this file for some reason. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23doc: uniphier: add simple guide to Verified BootMasahiro Yamada
Add a simple documentation about how to use the Verified Boot on UniPhier boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23ARM: uniphier: remove verify=n from environmentsMasahiro Yamada
If the environment "verify" is set to n, the image verification is entirely skipped. Remove it as a preparation for verified boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23ARM: uniphier: increase CONFIG_SYS_BOOTM_LEN to 32MBMasahiro Yamada
The default value of CONFIG_SYS_BOOTM_LEN, 0x800000, causes error when uncompressing Image.gz out of FIT image. Uncompressing Kernel Image ... Error: inflate() returned -5 Image too large: increase CONFIG_SYS_BOOTM_LEN Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23ARM: dts: uniphier: sync DT with Linux 4.14-rc5Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23ARM: uniphier: split u-boot,dm-pre-reloc out to uniphier-v7-u-boot.dtsiMasahiro Yamada
UniPhier 32-bit SoCs use CONFIG_SPL_OF_CONTROL. So, many nodes must be marked as dm-pre-reloc to prevent fdtgrep from stripping them off. Sprinkling U-Boot-specific properties all over the place is painful because DT files are synced with Linux from time to time. Split u-boot,dm-pre-reloc out to uniphier-v7-u-boot.dtsi, which is appended to UniPhier V7 DTS before the build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-10-23ARM: uniphier: remove CONFIG_UNIPHIER_ETHMasahiro Yamada
The option is never enabled by anyone. Remove the code surrounded by its ifdef. This should be handled by the clock/reset drivers. CONFIG_UNIPHIER_ETH in scripts/config_whitelist.txt will be dropped by the next resync. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23ARM: uniphier: enable DWC3 xHCI driver reallyMasahiro Yamada
I thought commit d37d31849c6a ("ARM: uniphier: enable DWC3 xHCI driver") enabled CONFIG_USB_DWC3_UNIPHIER, but CONFIG_USB_XHCI_DWC3 was missing in uniphier_v7_defconfig. Re-add. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-21uniphier_ld4_sld8: Re-add SMC911X_BASE addressTom Rini
This was dropped by accident in the Kconfig conversion. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-20net: Add SMC911X driver to Kconfig, convertAdam Ford
We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-20Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-19Merge git://git.denx.de/u-boot-x86Tom Rini
2017-10-19x86: conga-qeval20-qa3-e3845-internal-uart_defconfig: Add ACPI resume supportStefan Roese
I've missed to add the ACPI resume support to this x86 build target. This patch adds the ACPI resume support enabling S3 suspend / resume. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-19x86: provide CONFIG_BUILD_ROMHeinrich Schuchardt
Up to now we depended on an exported variable to build u-boot.rom. We should be able to specify it in the configuration file, too. With this patch this becomes possible using the new Kconfig option CONFIG_BUILD_ROM. This option depends on CONFIG_X86 and is selected in qemu-x86_defconfig and qemu-x86_64_defconfig. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-19x86: baytrail: fsp: Move Azalia update codes to boardBin Meng
Azalia configuration may be different across boards, hence it's not appropriate to do that in the SoC level. Instead, let's make the SoC update_fsp_azalia_configs() routine as a weak version, and do the actual work in the board codes. So far it seems only som-db5800-som-6867 board enables the Azalia. Move the original codes into som-db5800-som-6867.c. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-10-19x86: baytrail: fsp: Use a function to update the Azalia config pointerBin Meng
At present we directly pass the Azalia config pointer to the FSP UPD. This updates to use a function to do the stuff, like Braswell does. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-10-19x86: fsp: Consolidate Azalia header fileBin Meng
So far there are two copies of Azalia struct defines with one in baytrail and the other one in braswell. This consolidates these two into one, put it in the common place, and remove the prefix pch_ to these structs to make their names more generic. This also corrects reset_wait_timer from us to ms. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-10-19x86: Turn off running VGA ROM during S3 resumeBin Meng
This is only needed when graphics console is used. For kernel with native graphics driver, this can be turned off to speed up. Change this option's default to n in the Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-10-19x86: baytrail: Fix unstable ACPI S3 resumeBin Meng
It was observed that when booting a Ubuntu 16.04 kernel, doing ACPI S3 suspend/resume sometimes causes the Ubuntu kernel hang forever. The issue is however not reproduced with a kernel built from i386/ x86_64 defconfig configuration. The unstability is actually caused by unexpected interrupts being generated during the S3 resume. For some unknown reason, FSP (gold4) for BayTrail configures the GPIO DFX5 PAD to enable level interrupt (bit 24 and 25). As this pin keeps generating interrupts during an S3 resume, and there is no IRQ requester in the kernel to handle it, the kernel seems to hang and does not continue resuming. Clear the mysterious interrupt bits for this pin. Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-10-19x86: minnowmax: Adjust VGA rom addressBin Meng
Adjust VGA rom address to 0xfffb0000 so that u-boot.rom image can be built again. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-10-18Merge git://git.denx.de/u-boot-i2cTom Rini
2017-10-18Merge git://git.denx.de/u-boot-spiTom Rini
2017-10-17i2c: stm32f7_i2c: fix usage of useless local variablePatrice Chotard
Remove useless local variable "s" and use directly function's parameter "output" Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-17i2c: stm32f7_i2c: fix data abortChristophe Kerello
As "v" is a local variable in stm32_i2c_choose_solution() "v" has to be copied into "s" to avoid data abort in stm32_i2c_compute_timing(). Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-17i2c: remove DECLARE_GLOBAL_DATA_PTR from i2c-uclassMasahiro Yamada
No global pointer is used in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-10-16Prepare v2017.11-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-29 12:18:43 +0000