summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-09usb: xhci: Add missing cache flush in the scratchpad array initializationSylwester Nawrocki
In current code there is no cache flush after initializing the scratchpad buffer array with the scratchpad buffer pointers. This leads to a failure of the "slot enable" command on the rpi4 board (Broadcom STB PCIe controller + VL805 USB hub) - the very first TRB transfer on the command ring fails and there is a timeout while waiting for the command completion event. After adding the missing cache flush everything seems to be working as expected. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-07-09Merge tag 'for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2cTom Rini
i2c changes for v2020.10 - Add support for I2C controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. - Add I2C controller support for Cortina Access CAxxxx SoCs - new rtc methods, rtc command, and tests - imx_lpi2c: Improve the codes to use private data - stm32f7_i2c.c: Add new compatible "st,stm32mp15-i2c" - stm32f7_i2c.c: Add Fast Mode Plus support - pwm: Add PWM driver for SiFive SoC
2020-07-09Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Armada 38x DDR3 fixes, enhancements (Chris) - Armada 38x UTMI PHY SerDes fix (Chris) - Helios4 update - sync with clearfog (Dennis) - LaCie Kirkwood board rework - enable DM (Simon) - net/mvpp2 memory init fix (Sven)
2020-07-09net: mvpp2: fix second cp110 initializationSven Auhagen
Since the mdio code got upstreamed it is not possible to activate network ports on CP110 Master and Slave. The problem is in mvpp2_base_probe which is called for each CP110 and it initializes the buffer area for descs and rx_buffers. This should only happen once though and the bd space is actually set to 0 after the first run of the function. This leads to an error when the second CP110 tries the initialization again and disables all network ports on this CP110. This patch adds a static variable to check if the buffer area is initialized only once globally. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09arm: kirkwood: enable DM_ETH for LaCie boardSimon Guinot
This patch enables DM_ETH for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09arm: kirkwood: enable DM_USB for LaCie boardSimon Guinot
This patch enables DM_USB and USB_STORAGE for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09arm: kirkwood: switch LaCie boards to sata_mv driverSimon Guinot
This patch switches the SATA driver from mvsata_ide to sata_mv for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09arm: kirkwood: convert LaCie boards to DM_SPI_FLASHSimon Guinot
This patch converts the following Kirkwood-based LaCie boards to DM, DM_SPI and DM_SPI_FLASH: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09arm: kirkwood: add DT spi0 alias to LaCie boardsSimon Guinot
The spi0 alias is needed by the environment code to retrieve the SPI flash. This patch adds some -u-boot.dtsi files, providing the spi0 aliases, for all the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Note that this -u-boot.dtsi files will be removed as soon as the spi0 aliases will be available in the upstream Linux dtsi files. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09arm: mvebu: helios4: sync helios4 config to clearfog and dts to kernelDennis Gilmore
The helios4 is built on the same microsom as the clearfog, by syncing the config we enable the same featureset that exists in the som on the helios4. The current config does not boot as some of the clearfog changes needed to be made on the helios4 also, generally speaking most changes for the clearfog should also be made on the helios4. Signed-off-by: Dennis Gilmore <dennis@ausil.us> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09arm: mvebu: a38x: Adjust UTMI PHY parametersChris Packham
When running USB compliance tests on our Armada-385 hardware platforms we have seen some eye mask violations. Marvell's internal documentation says: Based on silicon test results, it is recommended to change the impedance calibration threshold setting to 0x6 prior to calibration. Port changes from Marvell's u-boot fork[1] to address this. [1] - https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/a6221551 Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09arm: mvebu: a38x: Fix typoChris Packham
Fix spelling of Alignment. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09mv_ddr: ddr3: Update {min,max}_read_sample calculationChris Packham
Measurements on actual hardware shown that the read ODT is early by 3 clocks. Adjust the calculation to avoid this. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [upstream https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/22] Signed-off-by: Chris Packham <judge.packham@gmail.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09mv_ddr: ddr3: Use correct bitmask for read sample delayChris Packham
In the Armada 385 functional spec (MV-S109094-00 Rev. C) the read sample delay fields are 5 bits wide. Use the correct bitmask of 0x1f when extracting the value. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [upstream https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/22] Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09x86: apl: Re-enable loading of SPLSimon Glass
At present the SPL loader is not included in the TPL image so SPL cannot be loaded. Fix it by including this file for both SPL and TPL. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: c87f9ce2273 ("x86: Don't build some unused objects in TPL") Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09spi: Remove unnecessary #ifdefs in header fileSimon Glass
These prevent use of compile-time checks such as: if (CONFIG_IS_ENABLED(DM_SPI)) since, for example, if CONFIG_SPL_DM_SPI is not enabled then the definitions are not included by spi.h and the C code will not build. The #ifdefs are unnecessary since there are no conflicts with the pre-DM code. In any case we have almost switched over to driver model for SPI. Drop these #ifdefs from spi.h to fix a build warning on chromebook_coral in the following patch. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09bootstage: Fix 'stacked' typoSimon Glass
This should be 'stashed'. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLEDRasmus Villemoes
This adds a bunch of preprocessor magic to extend the capabilities of CONFIG_IS_ENABLED. The existing semantics of CONFIG_IS_ENABLED(FOO) expanding to a 1 or 0 (depending on build context and the defined-ness or not of the appropriate CONFIG_FOO/CONFIG_SPL_FOO/CONFIG_TPL_FOO) are of course preserved. With this, one is also allowed a two-argument form CONFIG_IS_ENABLED(FOO, (something)) which expands to something precisely when CONFIG_IS_ENABLED(FOO) would expand to 1, and expands to nothing otherwise. It is, in other words, completely equivalent to the three lines #if CONFIG_IS_ENABLED(FOO) something #endif The second argument must be parenthesized in order to allow any tokens, including a trailing comma, to appear - one use case for this is precisely to make it a bit more ergonomic to build an array and only include certain items depending on .config. That should increase both readability and not least "git grep"ability. A third variant is also introduced, CONFIG_IS_ENABLED(FOO, (xxx), (yyy)) which corresponds to #if CONFIG_IS_ENABLED(FOO) xxx #else yyy #endif Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09linux/kconfig.h: remove unused helper macrosRasmus Villemoes
U-Boot does not have loadable modules, and nothing currently uses any of the (CONFIG_)?IS_(BUILTIN|MODULE) macros - only the (CONFIG_)?IS_ENABLED variants are ever used. While I understand the desire to keep this somewhat synchronized with linux, we've already departed by the introduction of the CONFIG_IS_ENABLED extra logic, and deleting these makes the next patch much simpler, since I won't have to duplicate a lot of logic for no real gain (as there are no users). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09linux/kconfig.h: simplify logic for choosing CONFIG_{SPL_, TPL_, }*Rasmus Villemoes
Instead of using the arg1_or_junk trick to pick between two choices, with a bit of duplication between the branches (and most of the CONFIG_TPL_BUILD case being redundant, as _IS_TPL is known to be defined to 1 in that case), simply define a prefix that we inject between CONFIG_ and the given config symbol. This only requires one level of indirection (to get the _CONFIG_PREFIX macro expanded before the token concatenation takes place), and makes it easy to, say, introduce a CONFIG_HOSTTOOL_ prefix. [I would expect most HOSTTOOL_ symbols to just be def_bool y, but it would allow us to clean up some of the ifdef HOSTCC mess in the sources shared between U-Boot and host tools.] Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09arm: cmd_stm32prog: Fix the CONFIG_IS_ENABLED() usageBin Meng
Add parentheses around CONFIG_IS_ENABLED() in the if statement, to fix potential build failures. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-09x86: minnowmax: Drop screen resolution to 1024x768Simon Glass
This seems like a more reasonable resolution for this board, since it is quite slow. It also allows it to work with a 5" LCD display in my lab. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09minnowmax: Enable the copy framebufferSimon Glass
Update the video driver to support this feature and enable it on minnowmax to speed up the display. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from over 13 seconds to 300ms, at 1280x1024. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09chromebook_link: Enable the copy framebufferSimon Glass
Update the video driver to support this feature and enable it on link. Also remove the multi-line scrolling since normal scrolling is fast enough now. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from about 930ms to 29ms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09chromebook_samus: Enable the copy framebufferSimon Glass
Update the video driver to support this feature and enable it on samus. Also remove the multi-line scrolling since normal scrolling is fast enough now. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from about 430ms to 12ms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09x86: video: Support copy framebuffer with probed devicesSimon Glass
For PCI video devices that are not mentioned in the devicetree, U-Boot does not bind a driver before relocation, since PCI is not fully probed at that point. Furthermore it is possible for the video device to be on a secondary bus which is not even scanned. This is fine if the framebuffer is allocated in fixed memory, as it normally is on x86. But when using this as a copy framebuffer, we also need U-Boot to allocate its own cached framebuffer for working in. Since the video driver is never bound before relocation, the framebuffer size is never set and U-Boot does no allocation. Add a new CONFIG option to reserve 16MB of memory for this eventuality. This allows vesa devices to use the copy framebuffer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Correctly handle multiple framebuffersSimon Glass
At present video_bottom is set to the bottom of each framebuffer when it is allocated. This is not correct, since it should hold the bottom of the entire area available for framebuffers. Fix this by adding a private address in the uclass which keeps track of the next available spot for a framebuffer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09x86: fsp: video: Allocate a frame buffer when neededSimon Glass
When the copy framebuffer is in use, we must also have the standard U-Boot framebuffer available. Update the FSP driver to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: pci: Set up the copy framebufferSimon Glass
When using a copy framebuffer we need to tell the video subsystem its address. U-Boot's normally allocated framebuffer is used as the working buffer, but nothing is displayed until it is copied to the copy framebuffer. For this to work the video driver must request that a framebuffer be allocated separately from the hardware framebuffer, so add a check for that. Also add a log category so that logging appears correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: sandbox: Add support for the copy framebufferSimon Glass
Enable this feature on sandbox by updating the SDL driver to have two framebuffers. Update the video tests to check that the copy framebuffer is kept in sync. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-07-09video: Add comments to struct sandbox_sdl_platSimon Glass
This struct is not commented but needs it. Also fix the comment in check_vidconsole_output() about the encoding for the rotation value. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-07-09video: Update the copy framebuffer when writing bitmapsSimon Glass
Adjust the bitmap code to sync to the copy framebuffer when done. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Update rotated console to support copy bufferSimon Glass
Update the implementation to keep a track of what it changes in the frame buffer and then tell the copy buffer about it. Use the special vidconsole_memmove() helper so that memmove() operations are also reflected in the copy buffer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Update truetype console to support copy bufferSimon Glass
Update the implementation to keep a track of what it changes in the frame buffer and then tell the copy buffer about it. Use the special vidconsole_memmove() helper so that memmove() operations are also reflected in the copy buffer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Update normal console to support copy bufferSimon Glass
Update the implementation to keep a track of what it changes in the frame buffer and then tell the copy buffer about it. Use the special vidconsole_memmove() helper so that memmove() operations are also reflected in the copy buffer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Add helpers for vidconsole for the copy framebufferSimon Glass
Add a convenience function to call video_sync_copy() for a vidconsole. Also add a memmove() helper, which does the memmove() as well as the sync. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Clear the copy framebuffer when clearing the screenSimon Glass
Update video_clear() to also sync to the copy framebuffer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Set up the copy framebuffer when enabledSimon Glass
This framebuffer is separately mapped. Update the video post-probe function to set this up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Add support for copying to a hardware framebufferSimon Glass
Some architectures use a cached framebuffer and flush the cache as needed so that changes are visible. This is supported by U-Boot. However x86 uses an uncached framebuffer with a 'write-combining' feature to speed up writes. Reads are permitted but they are extremely expensive. Unfortunately, reading from the frame buffer is quite common, e.g. to scroll it. This makes scrolling very slow. Add a new feature which supports copying modified parts of the frame buffer to the uncached hardware buffer. This speeds up scrolling by at least 10x on x86 so the extra complexity cost seems worth it. As a starting point, add the Kconfig, update the video structures to keep track of the buffer and add a function to do the copy. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Add a comment for struct video_uc_platdataSimon Glass
Add a few notes to explain the purpose of each member of this struct. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Drop unnecessary #ifdef around vid_console_color()Simon Glass
All of the functions in this file only apply if DM_VIDEO is enabled. Drop the #ifdef as it just clutters things up. Add the needed forward declaration. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Adjust rotated console to start at right edgeSimon Glass
At present when the console is rotated 180 degrees it starts almost a whole character to the left of the right edge (typically 7 pixels with an 8-pixel-wide font). On a display which aligns with the font width, this just wastes space. On a display that does not this can result in x_frac going negative for the final character (the one on the left side) and the overflow -EAGAIN check at the start of the function failing. Change the function to start at the rightmost pixel to fix these problems. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09video: Split out expression parts into variablesSimon Glass
The functions in this file do similar things but not always in the same way. To make the code easier to read and compare, use a separate 'linenum' variable in every function. This is then multiplied by the line length to get the offset within the frame buffer to modify. Also use an 'x' variable to hold the pixel position within that line. This is multipled by the pixel size and added to the offset. Also move the pbytes declaration up a little with the other long lines. A side effect of splitting out these variables is that they are promoted to int, i.e. a signed type, from the unsigned short used in the vidconsole_priv struct. This would be necessary should any of the variables go negative. At present this can actually happen in console_putc_xy_2(), if the display width is not a multiple of the character size (see next patch). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09sandbox: video: Allow selection of rotated consoleSimon Glass
Add a devicetree property to select a rotated console. This uses the same encoding as vidconsole itself: 0=normal; 1=90 degrees clockwise, 2=upside down, 3=90 degrees anticlockwise. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-07-09video: Show an error when a vidconsole function failsSimon Glass
At present these functions fail silently even when debugging, which is not very helpful. Add a way to print a message to the serial output when an error is detected. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09console: Add a way to output to serial onlySimon Glass
In the video drivers it is useful to print errors while debugging but doing so risks an infinite loop as the debugging info itself may go through the video drivers. Add a new console function that prints information only to the serial device, thus making it safe for use in debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09x86: fsp: Reinit the FPU after FSP meminitSimon Glass
The APL FSP appears to leave the FPU in a bad state in that it has registers in use. This causes an error when the next FPU operation is performed. Work around this by re-resetting the FPU after calling FSP-M. This allows the freetype console to work correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09pwm: Add PWM driver for SiFive SoCYash Shah
Adds a PWM driver for PWM chip present in SiFive's HiFive Unleashed SoC This driver is simple port of Linux pwm sifive driver from Linux v5.6 commit: 9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM") Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-09pwm: Add DT documentation for SiFive PWM ControllerYash Shah
DT documentation for PWM controller added from Linux v5.6 commit: daa78cc3408e ("pwm: sifive: Add DT documentation for SiFive PWM Controller") Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-09i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7Patrick Delaunay
Read SYSCFG bindings to set Fast Mode Plus bits if Fast Mode Plus speed is selected. Handle the stm32mp15 specific compatible to handle FastMode+ registers handling which is different on the stm32mp15 compared to the stm32f7 or stm32h7. Indeed, on the stm32mp15, the FastMode+ set and clear registers are separated while on the other platforms (F7 or H7) the control is done in a unique register. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
generated by cgit (git 2.34.1) at 2025-01-25 10:34:33 +0000