summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-30arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfigVipul Kumar
This patch moved ethernet PHY configs of Zynq boards to respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Remove ethernet alias for topic-miamiMichal Simek
Ethernet is not enabled that's why this alias should be completely unused. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Mark cc108 uart to be initialized before relocationMichal Simek
The same change is done for others zynq boards to get uart as early as possible. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Update years in copyright to reflect latest changesMichal Simek
Updating year in zynq files. Also add missing Copyright to board.c. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Add psu_init for zcu102-rev1.0Michal Simek
Add low level initialization for zcu102-rev1.0. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Prepare psu_init reworkMichal Simek
Move generic functions to common location psu_spl_init.c. Function declarations are added to private header. These changes are done in connection to the fact that still files from HDF can be copied over and compilation should pass. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INIT_ENABLEDMichal Simek
Remove SPL_BUILD dependency from zynqmp.c and move it to header file. Use only one symbol for including psu_init. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Remove unused empty functionsMichal Simek
Remove functions which are no longer renerated by PCW. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30nand: arasan: Select CONFIG_SYS_NAND_SELF_INITEzequiel Garcia
The Arasan NFC driver requires the self-init mode, so it should select it. Instead of having the config header define the macro, it's cleaner to select the option at the Kconfig level. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30nand: arasan_nfc: Use the calculated ecc address for updating ecc registerSiva Durga Prasad Paladugu
This patch corrects the ecc address calculation before updating to ecc register. The ecc address has to be calculated based on page, oob and ecc sizes of the device. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30nand: arasan_nfc: Add support for ondie eccSiva Durga Prasad Paladugu
This patch adds support for ondie ecc. As of now this adds support for micron parts which supports ondie ecc. Didn't found any better way to detect ondie ecc support by a device except sorting out with manufacture and device id's. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30nand: arasan_nfc: Move common ecc struct initialization init routineSiva Durga Prasad Paladugu
Move common part of ecc structure initialization to arasan_nand_init() routine. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30xilinx: zynqmp: Add new target with only emmc enabledSiva Durga Prasad Paladugu
This patch adds new target which is called as mini configuration with only emmc functionality and other required basic features enabled. This will be used to run in system with small footprint and needs emmc support. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30xilinx: zynqmp: Add new target with only nand enabledSiva Durga Prasad Paladugu
This patch adds new target which is called as mini configuration with only nand functionality and other required basic features enabled. This will be used to run in system with small footprint and needs nand support. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Provide a config to not map DDR region in MMU tableSiva Durga Prasad Paladugu
DDR less systems are possible for configuration like mini qspi and making DDR region as normal memory may cause speculative access which results u-boot hang if DDR is absent. So, this patch fixes the issue by not making DDR memory region entry into MMU table. Future solution is to prepare MMU table per memory node in dts instead of hard code DDR addresses. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Propagate error value from psu_init()Michal Simek
psu_init() returns int which wasn't declared and checked. The patch is fixing function declarations and code to handle return values properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Remove whitespaces in psu_init() commentMichal Simek
Remove additional spaces before comment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Fix pmu register description coding styleMichal Simek
Drop the space before/after '<' and '>'; and separate the entries to be a bit more readable. Reported-by: Julia Cartwright <julia@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Enable distro defaults settingMichal Simek
BOOTCOMMAND is composed with distro_bootcmd but this variable is not present. Enabling distro defaults setting is fixing it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Move bootcommand to defconfigMichal Simek
It will cleanup generic config and enable option to change it for every board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Enable DM_GPIO when neededMichal Simek
There are two reasons for doing this change. There is still !DM driver for xilinx soft gpio IP and especially it is saving some space for memory constrained boards like cse (almost ~400B). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabledMichal Simek
Do not enable DM_ETH/MMC if subsystems are not enabled. This saves memory for memory constrained boards like cse. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Enable BLK when neededMichal Simek
There is no reason to enable BLK by default for all boards which is just increasing memory footprint for memory contrained boards like cse. zc770s are also saving some space. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Disable networking for zc770 xm011Michal Simek
Ethernet cable is not connected for xm011 that's why disable all ethernet related configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Enable debug console for zc770 xm011Michal Simek
Wire debug console which is useful for early debugging. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add identification string to Xilinx boardsMichal Simek
It is good to see this string to make sure that u-boot which runs on the board is the same which should run there. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30armv8: zynqmp: Map PCIe High as device memoryAnders Hedlund
Set the 8GB PCIe High area as device memory. Also extend the DDR High area to cover the full 32GB range. Signed-off-by: Anders Hedlund <anders.j.hedlund@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30xilinx: zynqmp: Use strlen only if env_get doesn't return nullSiva Durga Prasad Paladugu
Add check if boot_targets exists in environment and then generate new_targets env accordingly. Performing strlen on null address causes it to fail with exception if isolation is enabled with DDR address zero as secure. It works with out isolation enabled as zero is valid address but it may lead to junk values in boot_targets. This patch fixes the issue by checking return value of env_get so that it generate boot_targets properly. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30ARM: zynq: remove unused CONFIG_ZC770_XM01* optionsMasahiro Yamada
These are defined, but not referenced at all. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Fix types in ps7_spl_initMichal Simek
The patch is fixing the following Warning: arch/arm/mach-zynq/ps7_spl_init.c:133:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] while (ioread(addr) < delay) ^ Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add support for zc770-xm011-x16 configurationMichal Simek
zc770-xm011 is x8 width configuration. This FMC card has also x16 variant which requires different ps7_init configuration. This patch adds it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add zc770-xm013 spl configurationMichal Simek
Simplify ps7_init* initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add zc770-xm012 spl configurationMichal Simek
Simplify ps7_init* initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add zc770-xm011 spl configurationMichal Simek
Simplify ps7_init* initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add zc770-xm010 spl configurationMichal Simek
Simplify ps7_init* initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30doc: zynq: Describe status of zc770-xm011Michal Simek
zc770-xm011 is also added and supported. Reflect this in README. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parametersAndy Shevchenko
New field acpi_rsdp_addr, which has been introduced in boot protocol v2.14 [1], in boot parameters tells kernel the exact address of RDSP ACPI table. Knowing it increases robustness of the kernel by avoiding in some cases traversal through a part of physical memory. It will slightly reduce boot time by the same reason. [1] See Linux kernel commit 2f74cbf ("x86/boot: Add the ACPI RSDP address to struct setup_header::acpi_rdsp_addr") @ https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=2f74cbf for the details. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: updated the kernel commit git URL and fixed one style issue] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-01-30x86: zImage: Move subarch assignment out of cmd_line checkAndy Shevchenko
The commit 20bfac0599bd ("x86: zImage: add Intel MID platforms support") introduced an assignment of subarch field in boot parameters, though missed the right place of doing that. It doesn't matter if we have or not a kernel command line supplied, we just set that field. Although guard it by protocol version which supports it. Fixes: 20bfac0599bd ("x86: zImage: add Intel MID platforms support") Cc: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-01-30x86: Fix reference to QEMU variant of write_acpi_tables()Andy Shevchenko
The commit eece493a7ac1 ("cmd: qfw: bring ACPI generation code into qfw core") moves ACPI related code to another file and missed an update of references in acpi_table.c. Do it now. Fixes: eece493a7ac1 ("cmd: qfw: bring ACPI generation code into qfw core") Cc: Miao Yan <yanmiaobest@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-01-30x86: tangier: Make _CRS for BTH0 Serialized to avoid warningAndy Shevchenko
ASL compiler warns: ASL board/intel/edison/dsdt.asl board/intel/edison/dsdt.asl.tmp 238: Method (_CRS, 0, NotSerialized) Remark 2120 - Control Method should be made Serialized ^ (due to creation of named objects within) Do as suggested by ASL compiler. Fixes: 5d8c4ebd95e2 ("x86: tangier: Add Bluetooth to ACPI table") Reported-by: Ferry Toth <fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-01-30configs: x86: allow to override CONFIG_BOOTCOMMANDHeinrich Schuchardt
Allow to override CONFIG_BOOTCOMMAND in .config. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-01-29Prepare v2018.03-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-29spl: include timezone in bannerKlaus Goger
Include the timezone in the SPL banner so the timestamp matches with that from u-boot proper. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-29aes: Allow non-zero initialization vectorАндрей Мозжухин
AES encryption in CBC mode, in most cases, must be used with random initialization vector. Using the same key and initialization vector several times is weak and must be avoided. Added iv parameter to the aes_cbc_encrypt_blocks and aes_cbc_decrypt_blocks functions for passing initialization vector. Command 'aes' now also require the initialization vector parameter. Signed-off-by: Andrey Mozzhuhin <amozzhuhin@yandex.ru>
2018-01-29kconfig: revert change that was not needed for -Wformat-securityMasahiro Yamada
Recent GCC versions warn if the format string is not a literal because the compiler cannot check the argument validity at compile time. Commit 192bc6948b02 ("Fix GCC format-security errors and convert sprintfs.") blindly replaced sprintf() with strcpy(), including many cases where the format parameter is a string literal. For the kconfig change: sprintf(header, " "); ..., here the format parameter is a string literal " ", so it is definitely equivalent to: strcpy(header, " "); Of course, if the 'header' did not have enough length for containing " ", it would be a security problem, but another problem. (in this case, the 'header' is 4 byte length buffer, so it is not a problem at all.) The kconfig code is kept as synced with Linux as possible, but this change made the code out-of-sync for nothing. Just reverting. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-29fs: btrfs: Fix printf format character warningTom Rini
When printing a size_t value we need to use %zu for portability between 32bit and 64bit targets. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Behun <marek.behun@nic.cz>
2018-01-29mvpp2: Fix warning over 32bit vs 64bit targetsTom Rini
When we have a driver that is used on both 32bit and 64bit targets and we are talking about address space we cannot use u64 nor u32 and instead need to use phys_addr_t. Fixes: 377883f16d36 ("net: mvpp2x: fix phy connected to wrong mdio issue") Cc: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-29clk: clk_stm32: Add .set_rate callbackPatrice Chotard
Since 'commit f4fcba5c5baa ("clk: implement clk_set_defaults()")' STM32F4 family board can't boot. Above patch calls clk_set_rate() for all nodes with assigned-clock-rates property. Clock driver for STM32F family doesn't implement .set_rate callback which make clk_set_defaults() exit on error and prevent board to boot. Fixes: f4fcba5c5baa ("clk: implement clk_set_defaults()") Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-29board: stm32: Fix stm32f746-disco bootPatrice Chotard
Since 'commit af2f44267 ("fdc spl: use different BOARD_INIT MACRO for spl and tpl")' board stm32f746-disco can't boot. The macro CONFIG_IS_ENABLED() can't evaluate the value of CONFIG_SPL_BOARD_INIT as it was defined in include/configs/stm32f746-disco.h without attributed value. Moving CONFIG_SPL_BOARD_INIT from stm32f746-disco.h to mach-stm32/Kconfig fixes this issue. Fixes: af2f44267 ("fdc spl: use different BOARD_INIT MACRO for spl and tpl") Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-29serial: Make full device search optionalAlexander Graf
Commit 608b0c4ad4e5ec0c ("serial: Use next serial device if probing fails") added code to search for more serial devices if the default one was not probed correctly. Unfortunately, that breaks omap3_evm. So while investigating why that is the case, let's disable the full search for everyone but bcm283x where it is needed. Fixes: 608b0c4ad4e5ec0c ("serial: Use next serial device if probing fails") Reported-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2024-12-27 21:24:31 +0000