summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-30efi_loader: remove superfluous NULL check in bootefi.cHeinrich Schuchardt
efi_free_pool() and efi_delete_handle() both check if their argument is NULL. The caller should not duplicate this check. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30test/py: fix test_efi_secboot/conftest.pyHeinrich Schuchardt
If udisksctl is present test/py/tests/test_efi_secboot/conftest.py fails because the disk image is never mounted. Normal users can only mount fuse file systems. Unfortunately fusefat is still in an experimental state and seems not to work here correctly. So as we have to be root or use the sudo command anyway delete all coding referring to udisksctl. -- We should not use mount point /mnt as this directory or one of its sub-directories might already be in use as active mount points. Instead create a new directory in the build root as mount point. -- Remove debug print statements that have been commented out. print without parentheses is anyway invalid in Python 3. And pytest anyway filters out the output if there is no exception reported. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- rmobile gen2/gen3 DTS sync and defconfig consolidation
2020-04-29ARM: dts: rmobile: Scrub unused DT nodesMarek Vasut
Remove DT nodes which are not used by U-Boot, like audio and video in/out nodes. This saves about 35 kiB on the resulting U-Boot binary without any impact on functionality. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28Merge branch 'migrate-various-PHY-options'Tom Rini
- Finish migration of CONFIG_PHYLIB and a number of related symbols to defconfig files.
2020-04-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28sunxi: Fix PHY regression on A20-OLinuXino-Lime2 and A20-Olimex-SOM-EVBTom Rini
When moving the PHYLIB PHY drivers around in Kconfig we did not at the same time perform a careful migration of the related drivers and sub-options. This lead to the case where previously Kconfig-enabled driver choices were now disabled on some platforms. Correct this by enabling both the PHY driver and sub-option on the above referenced platforms. Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") Fixes: 8728c97eff5b ("configs: Re-sync") Reported-by: Dario <dario86@tutamail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Prepare v2020.07-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28kbuild: SPL/TPL: generate separate asm-offsets.h for SPL and TPLMasahiro Yamada
Currently generic-asm-offsets.h and asm-offsets.h are generated based on U-Boot proper config options. The same asm-offsets headers are used for building U-Boot SPL/TPL, which causes potential offset mismatch if U-Boot proper has different config options from U-Boot SPL/TPL. This commit adds: spl/include/generated/(generic-)asm-offsets.h tpl/include/generated/(generic-)asm-offsets.h spl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_SPL=y, and included when building SPL. tpl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_TPL=y, and included when building TPL. They are created before Kbuild descends into SPL/TPL object directories and builds $(obj)/dts/dt-platdata.o because $(obj)/dts/dt-platdata.c includes a bunch of headers. Prepend -I$(obj)/include to $(UBOOTINCLUDE) so (generic-)asm-offsets.h is searched in {spl,tpl}/include/generated/. Requested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-28ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2Marek Vasut
Synchronize R-Car Gen3 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2Marek Vasut
Synchronize R-Car Gen2 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28ARM: rmobile: Unify Gen3 Salvator-X(S) and ULCB defconfigsMarek Vasut
The r8a779{5,6,65}_salvator-x and r8a779{5,6,65}_ulcb_defconfig were building the same target, except for the default DT. The default DT is however only a detail, as the actual DT to be used to configure U-Boot is detected automatically based on the CPU ID, hence the default DT is not meaningful. Unify each three defconfigs per board to reduce the duplication. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28Merge tag 'u-boot-amlogic-20200428' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs - add GXBB USB PHY driver - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards - fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC2/DWC3 improvements - Assorted bugfixes
2020-04-28Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-04-28Merge tag 'dm-pull-27apr20' of git://git.denx.de/u-boot-dmTom Rini
Move Python tools to use absolute paths Minor buildman fixes for new features Make libfdt code more similar to upsteam
2020-04-28usb: host: dwc3-sti-glue: Use UCLASS_NOP instead of UCLASS_MISCPatrice Chotard
dwc3-sti-glue has been broken since MISC uclass has been modified to scan DT sub-nodes after bind. Fixing it by a using the no-op uclass. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-28usb: host: dwc2: add trace to have clean usb startPatrick Delaunay
Solve issue for the display of "usb start" command on stm32mp1 because one carriage return is missing in DWC2 probe. Before the patch: STM32MP> usb start starting USB... Bus usb-otg@49000000: Bus usbh-ehci@5800d000: USB EHCI 1.00 after the patch: STM32MP> usb start starting USB... Bus usb-otg@49000000: USB DWC2 Bus usbh-ehci@5800d000: USB EHCI 1.00 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28usb: host: dwc2: force reset assertPatrick Delaunay
Assert reset before deassert in dwc2_reset; this patch solve issues when the DWC2 registers are already initialized with value incompatible with host mode. Force a hardware reset of the IP reset all the DWC2 registers at default value, the host driver start with a clean state (Core Soft reset doen in dwc_otg_core_reset is not enought to reset all register). The error can occurs in U-Boot when DWC2 device gadget driver force device mode (called by ums or dfu command, before to execute the usb start command). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28usb: host: dwc2: add clk supportPatrick Delaunay
Add support for clock with driver model. This patch don't added dependency because when CONFIG_CLK is not activated the clk function are stubbed. Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28usb: host: dwc2: add phy supportPatrick Delaunay
Use generic phy to initialize the PHY associated to the DWC2 device and available in the device tree. This patch don't added dependency because when CONFIG_PHY is not activated, the generic PHY function are stubbed. Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28dm: clk: add stub when CONFIG_CLK is deactivatedPatrick Delaunay
Add stub for functions clk_...() when CONFIG_CLK is deactivated. This patch avoids compilation issues for driver using these API without protection (#if CONFIG_IS_ENABLED(CLK)) For example, before this patch we have undefined reference to `clk_disable_bulk') for code: clk_disable_bulk(&priv->clks); clk_release_bulk(&priv->clks); Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28usb: ether: avoid NULL check before free()Heinrich Schuchardt
free() checks if its argument is NULL. Do not duplicate this check. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-28usb: avoid NULL check before freeHeinrich Schuchardt
The free() function checks if the argument is NULL. Do not duplicate this check. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-28usb: dwc3-meson-g12a: add power-on/off of the PHYsNeil Armstrong
Power on/off the PHYs to enable power to the USB ports, fixing USB support on Khadas VIM3/VIM3L boards. The G12A USB complex has at least 2 USB2 PHYs, but one is muxed between the DWC2 and DWC3 controller and the other one directly connected to the DWC3 controller. The USB3+PCIe combo PHY is muxed between the DWC3 controller and a DW-PCIE controller. All PHYs are optional, but it's type (usb2/usb3) and position are important to determine it's capabilities, thus they are stored in a fixed size array and the phy-name determines it's position, it's position determining it's type and functionnalities. This is why we need to loop over the array to power on all the DT provided PHYs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de>
2020-04-28configs: khadas-vim3: enable support for SPI NOR flashNeil Armstrong
Enable the necessary configs to make usage of the SPI NOR Flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28arm: dts: meson-khadas-vim3: enable SPI NOR flashNeil Armstrong
Enable the SPI flash controller and reduce the usable eMMC data pins to 4 to permit using the on-board SPI NOR Flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28configs: khadas-vim2: enable support for SPI NOR flashNeil Armstrong
Add the necessary configs to use the SPI NOR flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28arm: dts: meson-gxm-khadas-vim2-u-boot: enable SPI NOR flashNeil Armstrong
Activate the on-board SPI NOR Flash by enabling the SPI controller and disabling the DS eMMC pin in the VIM2 u-boot.dtsi file. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28arm64: dts: meson: sync dt and bindings from v5.7-rc1Neil Armstrong
Sync the device tree and dt-bindings from Linux v5.7-rc1 8f3d9f354286 ("Linux 5.7-rc1"). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28phy: meson: add GXBB PHY driverBeniamino Galvani
This adds support for the USB PHY found on Amlogic GXBB SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28clk: meson: g12a: add missing SD_EMMC_A controller gatesNeil Armstrong
Add missing SD_EMMC_A controller gates needed for probe of the A controller, otherwise leading to a freeze of the SoC after b3d69aa596. Fixes: b3d69aa596 ("clk: meson: reset mmc clock on probe") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-27Merge branch '2020-04-27-master-imports'Tom Rini
- Assorted bugfixes. - Documentation improvements including support for https://u-boot.readthedocs.io/
2020-04-27Merge tag 'mips-pull-2020-04-27' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - brcmnand: fix missing code path from Linux driver - bmips: fix build error when disabling USB - mips: add option to restore original exception vector base - mips: fix off-by-one error when clearing gd_data - mips: minor fixes for compatibility with generic SPL framework - spl: refactor legacy image loading - spl: add LZMA decompression support for legacy images - Makefile: add target to build LZMA compressed U-Boot images - mtmips: refactor and rewrite low-level init code - mtmips: add and enable SPL support with LZMA - mtmips: add support for MT7628 reference board - mtmips: add support for VoCore/VoCore2 board
2020-04-27Merge tag 'arc-more-fixes-for-2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc Here we introduce new development platfrom for ARC: HSDK 4xD. That's pretty much the same base-board as in HSDK but with very recent quad-core ARC HS47D in the ASIC. Thus we try to re-use existing code as much as possible while inevitably add some pieces needed for the new ASIC. Also we drop selection of bounce buffers on AXS10x as there's no use of them any longer.
2020-04-27Azure/GitLab: Switch over to using LLVM-10Tom Rini
At this point LLVM-7 is rather old. Switch over to LLVM-10 to enable some amount of CI coverage with newer compilers. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-27travis: Switch over to using LLVM-10Tom Rini
At this point LLVM-7 is rather old. Switch over to LLVM-10 to enable some amount of CI coverage with newer compilers. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-27Azure/GitLab: Update to latest Docker imageTom Rini
This provides a newer ARC toolchain along with being based on a newer Ubuntu bionic tag. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-27travis: Update ARC toolchain to 2019.09Tom Rini
Per Alexey Brodkin, this is the current toolchain we should use when building for ARC, update. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-27Makefile: copy SPL_FIT_SOURCE in build directoryPatrick Delaunay
Copy the .its source file selected by CONFIG_SPL_FIT_SOURCE in builddir and in a file named "u-boot.its". This patch avoid compilation issue when CONFIG_SPL_FIT_SOURCE is used and KBUILD_OUTPUT is defined, in buildman for example. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2020-04-27net: tftp: remove TFTP_MTU_BLOCKSIZEPatrick Delaunay
Remove the unneeded define TFTP_MTU_BLOCKSIZE. Since the KConfig migration done by commit b618b3707633 ("net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig"), CONFIG_TFTP_BLOCKSIZE is always defined and can be used directly to avoid confusion (fallback to 1468 in code is never used). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-27net: tftp: Add help for CONFIG_TFTP_BLOCKSIZEPatrick Delaunay
Add help message for the CONFIG_TFTP_BLOCKSIZE default value, as explain in tftp.c before migration in commit b618b3707633 ("net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-27fs: ext4: skip journal state if fs has metadata_csumArnaud Ferraris
As u-boot doesn't support the metadata_csum feature, writing to a filesystem with this feature enabled will fail, as expected. However, during the process, a journal state check is performed, which could result in: - a fs recovery if the fs wasn't umounted properly - the fs being marked dirty Both these cases result in a superblock change, leading to a mismatch between the superblock checksum and its contents. Therefore, Linux will consider the filesystem heavily corrupted and will require e2fsck to be run manually to boot. By bypassing the journal state check, this patch ensures the superblock won't be corrupted if the filesystem has metadata_csum feature enabled. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
2020-04-27test: test_fs error messageHeinrich Schuchardt
For non-root users mkfs.vfat is not in the search path at least on Debian. Hence when running 'make tests' a message indicates that file system tests have been skipped: SKIPPED [13] test/py/tests/test_fs/conftest.py:340: Setup failed for filesystem: fat16 This message is not really helpful as the executed program is not indicated. Provide a more complete message like SKIPPED [13] test/py/tests/test_fs/conftest.py:340: Setup failed for filesystem: fat16. Command 'mkfs.vfat -F 16 build-sandbox/persistent-data/3GB.fat16.img' returned non-zero exit status 127. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-27lib: zlib: fix formatting, referenceHeinrich Schuchardt
Provide a valid reference for the deflate format. Reformat the ALGORITHM and REFERENCES comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-27doc: sphinx: refresh parse-headers.pl from LinuxHeinrich Schuchardt
Copy parse-headers.pl from Linux kernel tree: * fix the parameter description %s/--man/--usage/ * fix a documentation reference Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-27Add .readthedocs.ymlHeinrich Schuchardt
readthedocs.org allows to automatically generate and publish the HTML documentation for the U-Boot project. Add a file controlling building https://u-boot.readthedocs.io/. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-27doc: specify that xelatex is used as Latex engineHeinrich Schuchardt
Building the pdf documentation on readthedocs.org fails with pdflatex. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-27tools: fw_env: use erasesize from MEMGETINFO ioctlRasmus Villemoes
We have a board with several revisions. The older ones use a nor flash with 64k erase size, while the newer have a flash with 4k sectors. The environment size is 8k. Currently, we have to put a column containing 0x10000 (64k) in fw_env.config in order for it to work on the older boards. But that ends up wasting quite a lot of time on the newer boards that could just erase the 8k occupied by the environment - strace says the 64k erase takes 0.405 seconds. With this patch, as expected, that's about an 8-fold better, at 0.043 seconds. Having different fw_env.config files for the different revisions is highly impractical, and the correct information is already available right at our fingertips. So use the erasesize returned by the MEMGETINFO ioctl when the fourth and fifth columns (sector size and #sectors, respectively) are absent or contain 0, a case where the logic previously used to use the environment size as erase size (and consequently computed ENVSECTORS(dev) as 1). As I'm only testing this on a NOR flash, I'm only changing the logic for that case, though I think it should be possible for the other types as well. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
generated by cgit (git 2.34.1) at 2024-12-24 00:03:33 +0000