summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-13env: Add !ENV_IS_IN_EXT4 dependency to ENV_IS_NOWHEREAlex Kiernan
If ENV_IS_IN_EXT4 is set you shouldn't be able to select ENV_IS_NOWHERE. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Petr Vorel <petr.vorel@gmail.com>
2018-06-13u-boot: Fix several typosShyam Saini
's/environemnt/environment/' and 's/Environemnt/Environment/' Signed-off-by: Shyam Saini <shyam@amarulasolutions.com>
2018-06-13tools: env: Use getline rather than fgets when reading config/scriptAlex Kiernan
When reading the config file, or a script file, use getline rather than fgets so line lengths aren't limited by the size of a compiled in buffer (128 characters for config, 1024 for scripts). Rename 'dump' to 'line' so it's clear we're working with a line of text. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-06-13AM3517_EVM: Fix Environmental locationAdam Ford
The am3517-evm boards stores the environment in NAND, but after merging various configs, the board was trying to load environment variables from FAT which would ultimately fail and cause some chatter. This patch removes the ENV_IS_IN_FAT flag to eliminate the noise. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-13lib: Add hexdumpAlexey Brodkin
Often during debugging session it's very interesting to see what data we were dealing with. For example what we write or read to/from memory or peripherals. This change introduces functions that allow to dump binary data with one simple function invocation like: ------------------->8---------------- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); ------------------->8---------------- which gives us the following: ------------------->8---------------- 00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35 ....baudrate=115 00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e 200.bootargs=con 00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30 sole=ttyS3,11520 00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00 0n8.bootdelay=3. 00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00 bootfile=uImage. 00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39 fdtcontroladdr=9 00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72 ffb1ba0.loadaddr 00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65 =0x82000000.stde 00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 rr=serial0@e0022 00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c 000.stdin=serial 000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75 0@e0022000.stdou 000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30 t=serial0@e00220 000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.............. ... ------------------->8---------------- Source of hexdump.c was copied from Linux kernel v4.7-rc2. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Mario Six <mario.six@gdsys.cc> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Stefan Roese <sr@denx.de>
2018-06-13fs: btrfs: Fix not all CHUNK_ITEMs being read from CHUNK_TREEYevgeny Popovych
This causes errors when translating logical addresses to physical: btrfs_map_logical_to_physical: Cannot map logical address <addr> to physical btrfs_file_read: Error reading extent The behavior of btrfs_map_logical_to_physical() is to stop traversing CHUNK_TREE when it encounters first non-CHUNK_ITEM, which makes only some portion of CHUNK_ITEMs being read. Change it to skip over non-chunk items. Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Sergey Struzh <sergeys@pointgrab.com> Reviewed-by: Marek Behun <marek.behun@nic.cz>
2018-06-13ARM64: meson: Sync DT with Linux 4.17Neil Armstrong
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.0 This will enable USB on Amlogic Meson GXL Boards like Khadas VIM, P212 or LibreTech-CC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-13fs: fat: fix wrong casting to unsigned value of sect_to_cluster()Seung-Woo Kim
After the commit 265edc03d5a1 ("fs/fat: Clean up open-coded sector <-> cluster conversions"), it is hung up writing new file to FAT16 disk with more than 19 files in armv7. It is because result value of sect_to_cluster() is not proper by casting from signed value to unsigned value. Fix the wrong casting of sect_to_cluster(). Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-06-13usb: sunxi: sun50i: enable OHCI0 clock when OHCI1 is in useVasily Khoruzhick
On A64 OHCI1 clock source is OHCI0 clock, so we need to enable OHCI0 clock when OHCI1 is in use. Fixes commit dd3228170ad7 ("usb: sunxi: Switch to use generic-phy") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13usb: sunxi: ohci: get rid of ifdefsVasily Khoruzhick
We can use compatibles instead. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13usb: sunxi: ehci: get rid of ifdefsVasily Khoruzhick
We can use compatibles instead. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13sunxi: clock: Fix EHCI and OHCI clocks on A64Vasily Khoruzhick
EHCI0 is bit 24, EHCI1 - 25, OHCI0 - 28, OHCI1 - 29 Fixes commit fef73766d9ad ("sunxi: clock: Fix OHCI clock gating for H3/H5") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13x86: cougarcanyon2: Add missing chipset interrupt informationBin Meng
Add Panther Point chipset interrupt pin/PIRQ information, and enable the generation of PIRQ routing table and MP table. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: irq: Support discrete PIRQ routing registers via device treeBin Meng
Currently both pirq_reg_to_linkno() and pirq_linkno_to_reg() assume consecutive PIRQ routing control registers. But this is not always the case on some platforms. Introduce a new device tree property intel,pirq-regmap to describe how the PIRQ routing register offset is mapped to the link number and adjust the irq router driver to utilize the mapping. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: irq: Parse number of PIRQ links from device treeBin Meng
The "intel,pirq-link" property in Intel IRQ router's dt bindings has two cells, where the second one represents the number of PIRQ links on the platform. However current driver does not parse this information from device tree. This adds the codes to do the parse and save it for future use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: efi: payload: Minor clean up on error message outputBin Meng
If GetMemoryMap() fails, we really want to know EFI_BITS_PER_LONG instead of BITS_PER_LONG. A space and LF are added in places where error message is output to improve readability. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13dm: pci: Use a 1:1 mapping for bus <-> phy addressesChristian Gmeiner
If U-Boot gets used as coreboot payload all pci resources got assigned by coreboot. If a dts without any pci ranges gets used the dm is not able to access pci device memory. To get things working make use of a 1:1 mapping for bus <-> phy addresses. This change makes it possible to get the e1000 U-Boot driver working on a sandybridge device where U-Boot is used as coreboot payload. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fixed 'u-boot' in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13dm: pci: Make ranges dt property optionalChristian Gmeiner
If we use U-Boot as coreboot payload with a generic dts without any ranges specified we fail in pci pre_probe and our pci bus is not usable. So convert decode_regions(..) into a void function and do the simple error handling there. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fixed 'u-boot' in the commit message and checkpatch warning] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: efi: payload: Enforce toolchain to generate 64-bit EFI payload stub codesBin Meng
Attempting to use a toolchain that is preconfigured to generate code for the 32-bit architecture (i386), for example, the i386-linux-gcc toolchain on kernel.org, to compile the 64-bit EFI payload does not build. This updates the makefile fragments to ensure '-m64' is passed to toolchain when building the 64-bit EFI payload stub codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: efi: app: Fix broken EFI applicationBin Meng
The EFI application does not boot currently. It's due to the call to syscon_get_by_driver_data() in cpu_init_r() maps to nowhere as CONFIG_SYSCON is not included in the configuration. EFI application is built as a shared library, so GCC won't complain during the build process if some symbols are not found. GCC will simply put these symbols into the .plt section and expect dynamic loader to fix these up. While we are here, remove some commands and drivers that are not needed at present. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: Conditionally build the pinctrl_ich6 driverBin Meng
The pinctrl_ich6 driver is currently unconditionally built for all x86 boards. Let's use a Kconfig option to control the build. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: irq: Change LINK_V2N and LINK_N2V to inline functionsBin Meng
LINK_V2N and LINK_N2V are currently defines, so they cannot handle complex logics. Change to inline functions for future extension. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: irq: Remove chipset specific irq router driversBin Meng
At present there are 3 irq router drivers. One is the common one and the other two are chipset specific for queensbay and quark. However these are really the same drivers as the core logic is the same. The two chipset specific drivers configure some registers that are outside the irq router block which should really be part of the chipset initialization. Now we remove these specific drivers and make all x86 boards use the common one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: cougarcanyon2: Enable CPU driver and SMP supportBin Meng
This enables the 206ax cpu driver on Intel Cougar Canyon 2 board, so that SMP can be supported too. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: chromebook_link: Remove dm-pre-reloc property in the cpu nodesBin Meng
The 206ax cpu driver does not require pre-relocation flag to work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: ivybridge: Drop CONFIG_USBDEBUGBin Meng
This is not used anywhere. Clean this up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: ivybridge: Enable 206ax cpu driver for FSP buildBin Meng
At present this 206ax cpu driver is only built when FSP is not used. This updates the Makefile to enable the build for both cases. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: cougarcanyon2: Remove CONFIG_HAVE_INTEL_MEBin Meng
As README.x86 already mentions, there are two SPI flashes mounted on Intel Cougar Canyon 2 board, called SPI-0 and SPI-1 respectively. SPI-0 stores the flash descriptor and the ME firmware. SPI-1 stores the actual BIOS image which is U-Boot. Building a single image with both ME firmware and U-Boot does not make sense. This also describes the exact flash location where the u-boot.rom should be programmed in the documentation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: cougarcanyon2: Update dts for SPI lock downBin Meng
It turns out that like Braswell, Intel FSP for IvyBridge requires SPI controller settings to be locked down, as the U-Boot ICH SPI driver fails with the following message on Cougar Canyon 2 board: "ICH SPI: Opcode 9f not found" Update the SPI node property to indicate this fact. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: ivybridge: Imply USB_XHCI_HCDBin Meng
The Panther Point chipset connected to Ivybridge has xHC integrated, imply it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13usb: xhci-pci: Fix compiler warningBin Meng
This fixes the following compiler warning: "warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]" Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: baytrail: Correct the comment of IACORE_VIDS bit rangesBin Meng
The guaranteed vid bit ranges in IACORE_VIDS MSR is actually [22:16]. This corrects the comment for it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: acpi: Adopt new version of iASL compilerAndy Shevchenko
The commit f9a88a4c1cd0 ("iASL: Enhance the -tc option (create AML hex file in C)") in ACPICA project changed a template of the variable that is used in the generated C-file. Now, instead of hard coded "AmlCode" the "%s_aml_code" is in use, where the prefix is a lowered case base name of the output file. In our case it will be "dsdt" producing a name as "dsdt_aml_code". The quick solution is to call sed which replaces new name by the old one to keep compatibility with old version of iASL. The long term solution would be to modify code to use the new name because it is more scalable. Cc: Robert Moore <robert.moore@intel.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Evan Lloyd <evan.lloyd@arm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fixed two sentences in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-06-13x86: tsc: add support for reading CPU freq from cpuidChristian Gmeiner
Starting with cpuid level 0x16 (Skylake-based processors) it is possible to get CPU base freq via cpuid. This fixes booting on a skylake based system. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fixed wrong indention of labels] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-06-12include/linux/byteorder: Sync to latest Linux definitionsRamon Fried
generic.h has changed in Linux and new addtionals functions were added. This commit takes the latest and greatest from Linux (v4.17-rc5) to aid with porting drivers that utilize these functions. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-12doc: cmd: bubt: drop duplicated textBaruch Siach
This commit removes text that is exact duplicated of the text above. Cc: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2018-06-12configs: pcm051: Use am335x-wega-rdk.dtb as fdtfileMatwey V. Kornilov
In upstream Linux kernel, the fdtfile for this specific board is called am335x-wega-rdk.dtb Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2018-06-12configs: pcm051: Use DEFAULT_LINUX_BOOT_ENV instead of hardcoded valuesMatwey V. Kornilov
It appears that DEFAULT_LINUX_BOOT_ENV can be used to boot pcm051 board. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2018-06-12configs: pcm051: Use DEFAULT_MMC_TI_ARGS instead of hardcoded duplicatesMatwey V. Kornilov
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2018-06-12configs: pcm051: Support distro bootcmdsMatwey V. Kornilov
Add support for distro bootcmds. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2018-06-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-06-12Merge git://git.denx.de/u-boot-marvellTom Rini
2018-06-12arm: mvebu: Add Helios4 Armada 38x initial supportDennis Gilmore
The helios4 is built on the SolidRun Armada 38x SOM. The port os based on the ClearFog board, using information from https://github.com/helios-4/u-boot-marvell as well as dtb input from https://github.com/helios-4/linux-marvell Signed-off-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-11LS1012AFRWY: Add Secure Boot supportVinitha V Pillai
Added the following: 1. defconfig for LS1012AFRWY Secure boot 2. PfE Validation support Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-11board: ls1012a: FRWY-LS1012A board supportBhaskar Upadhaya
FRWY-LS1012A belongs to LS1012A family with features 2 1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, QuadSPI, Audio, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> [yorks: rebase and fix SPDX tag] [yorks: fix board/freescale/ls1012afrdm/Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-08board: Kconfig: Re-Arrangement of PPA firmware and header addressesBhaskar Upadhaya
PPA firmware and header address may vary depending upon different boards, configure ppa firmware and header address in board specific Kconfig. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-08arm: ls1021aqds: config: enable CONFIG_ID_EEPROM for mac commandJagdish Gediya
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-08board/freescale,lsch3: Add entry for 0.9vPriyanka Jain
As per updated hardware documentation for lsch3 based chips like LS2088A, 0.9v support has been added in possible supported SoC volatges Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-08armv8: ls1088a: Enable USB in ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfigRan Wang
Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-08Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini
generated by cgit (git 2.34.1) at 2024-12-28 18:39:15 +0000