summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-10net: phy: realtek: add rx delay support for RTL8211FFugang Duan
Add RX delay enable support for RTL8211F PHY. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10net: Update eQos driver and FEC driver to use eth phy interfacesYe Li
Update eQoS and fec ethernet drivers to support shared MDIO framework Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10net: Add eth phy generic driver for shared MDIOYe Li
For dual ethernet controllers, the HW design may connect ETH phys to one MDIO ports. So two different ethernet drivers have to share MDIO bus. Since two ethernet drivers are independent, we can't ensure their probe order. To resolve this problem, introduce an eth phy generic driver and uclass. After eth-uclass binds, we search the mdio node and binds the phy node with the eth-phy-generic driver. When one eth driver get its phy device, the parent of phy device will probe prior than phy device. So this ensure the eth driver ownes the MDIO bus will be probed before using its MDIO. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10net: eth-uclass: add return value checkPeng Fan
Add return value check Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10pinctrl: nxp: scu: Check the pad partition before set pinmuxYe Li
If a pad is not owned by current partition we should not set its pinmux. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx8mq_phanbell: Run SPL with caches enabledFabio Estevam
It is safe to run SPL with caches enabled on i.MX8M, so remove such restriction. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-05-10net: fec: add fuse checkPeng Fan
Add fuse check for fec. If the fuse indicates the module will not work in the SoC, let's fail the initialization. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-10usb: mx6: add fuse checkPeng Fan
Add fuse check for USB. If the fuse indicates the module will not work in the SoC, let's fail the initialization. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10i2c: mxc: add fuse checkPeng Fan
Add fuse check for I2C. If the fuse indicates the module will not work in the SoC, let's fail the initialization. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: add module fuse supportPeng Fan
There are different parts from one SoC. Take i.MX6ULL for example, some part might not have ENET, some might have; some might not have USB, some might have. The information could be got from OCOTP, to make one image support the different parts, we need runtime disable linux kernel dts node and uboot driver probe if the corresponding module not exists in the part. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQMarek Vasut
Add initial support for Technexion Pico-iMX8MQ SoM on PicoPI carrier board. Currently working is ethernet, serial, eMMC. DT is imported from Linux 5.4.28 ("462afcd6e7ea") . Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-05-10Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
2020-05-10cmd: efidebug: fix -Werror=type-limits warningHeinrich Schuchardt
Compiling with -Wtype-limits yields: cmd/efidebug.c:968:32: error: comparison is always false due to limited range of data type [-Werror=type-limits] 968 | if (*endp != '\0' || bootnext > 0xffff) { | Remove the superfluous check. Fixes: 59df7e7e77e7 ("cmd: add efidebug command") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-09net: ethernet: ti: am65-cpsw-nuss: enable 10Mbps link speed in rgmii modeMurali Karicheri
In RGMII mode the 10Mbps link speed is supported only when CPSW2G MAC SL is configured for External Control ("in band") mode CPSW_PN_MAC_CONTROL_REG.CTL_EN(18) = 1 Hence update am65_cpsw_update_link() to follow documentation. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-05-09configs: ti: Fix usage of undefined variable overlay_filesSuman Anna
The env variable overlay_files is used while adding the environment support commands for FIT loading, but it was cleaned up just prior in commit ee53b59511a6 ("configs: Remove unneeded overlay_files environment variable"). Fix this by replacing the undefined variable with the proper name_overlays env variable. Fixes: 76470b6929d5 ("configs: ti: Add environment support commands for FIT loading") Signed-off-by: Suman Anna <s-anna@ti.com>
2020-05-09doc: add Unicode functions to API descriptionHeinrich Schuchardt
Add include/charset.h to generated HTML documentation Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-09lib: charset: correct function descriptionsHeinrich Schuchardt
Change function descriptions to match kernel doc style. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-09test: unit test for u16_strsize()Heinrich Schuchardt
Provide a test for new Unicode library function u16_strsize(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-09charset: Add support for calculating bytes occupied by a u16 stringSughosh Ganu
The current code uses 'u16_strlen(x) + 1) * sizeof(u16)' in various places to calculate the number of bytes occupied by a u16 string. Let's introduce a wrapper around this. This wrapper is used on following patches Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-09efi_selftest: add unit test functions to HTML documentationHeinrich Schuchardt
Add the UEFI unit test helper functions to the generated HTML documentation. Correct some documentation texts in include/efi_selftest.h. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-09cmd: efidebug: add a comment against Coverity check (300329)AKASHI Takahiro
The check here, "Null pointer dereferences," is a false positive. So leave a comment. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reported-by: Coverity (CID 300329)
2020-05-09cmd: efidebug: fix a wrong handling of argumentsAKASHI Takahiro
Coverity detected a dead code, but actually there is a bug in a check against a number of arguments. So simply fix it. Reported-by: Coverity (CID 300330) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-09efi_loader: variable: check a return value of uuid__str_to_bin()AKASHI Takahiro
The only error case is that a given UUID is in wrong format. So just return EFI_INVALID_PARAMETER here. Reported-by: Coverity (CID 300333) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-09efi_loader: image_loader: fix a Coverity check against array accessAKASHI Takahiro
Coverity detected: Using "&opt->CheckSum" as an array. This might corrupt or misinterpret adjacent memory locations. The code should work as far as a structure, IMAGE_OPTIONAL_HEADER(64) is packed, but modify it in more logical form. Subsystem is a member next to CheckSum. Reported-by: Coverity (CID 300339) Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-08Merge branch '2020-05-08-assorted-fixes'Tom Rini
2020-05-08test: fix naming of test functions in the log test suiteHeinrich Schuchardt
Both the nolog as well as the syslog tests were not found by Python function generate_ut_subtest() due to not following the nameing requirements imposed by the regular expression used to find linker generated list entries in file u-boot.sym. Adjust the naming of test functions. With the patch the following tests are executed successfully for sandbox_defconfig: test/py/tests/test_ut.py::test_ut[ut_log_syslog_debug] PASSED test/py/tests/test_ut.py::test_ut[ut_log_syslog_err] PASSED test/py/tests/test_ut.py::test_ut[ut_log_syslog_info] PASSED test/py/tests/test_ut.py::test_ut[ut_log_syslog_nodebug] PASSED test/py/tests/test_ut.py::test_ut[ut_log_syslog_notice] PASSED test/py/tests/test_ut.py::test_ut[ut_log_syslog_warning] PASSED The nolog tests are only executed if CONFIG_LOG=n and CONFIG_CONSOLE_RECORD=y. Reported-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-08test: describe naming conventions for macro UNIT_TESTHeinrich Schuchardt
Strict naming conventions have to be followed for Python function generate_ut_subtest() to collect C unit tests to be executed via command 'ut'. Describe the requirements both on the C as well on the Python side. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-08env/sf.c: honour CONFIG_SPL_SAVEENVRasmus Villemoes
Deciding whether to compile the env_sf_save() function based solely on CONFIG_SPL_BUILD is wrong: For U-Boot proper, it leads to a build warning in case CONFIG_CMD_SAVEENV=n (because the initialization of the .save member is guarded by CONFIG_CMD_SAVEENV, while the env_sf_save() function is built if !CONFIG_SPL_BUILD - and even without the CONFIG_CMD_SAVEENV guard, the env_save_ptr() macro would just expand to NULL, with no reference to env_sf_save visible to the compiler). And for SPL, when one selects CONFIG_SPL_SAVEENV, one obviously expects to actually be able to save the environment. The compiler warning can be fixed by using a "<something> ? env_sf_save : NULL" construction instead of a macro that just eats its argument and expands to NULL. That way, if <something> is false, env_sf_save gets eliminated as dead code, but the compiler still sees the reference to it. For <something>, we can use CONFIG_IS_ENABLED(SAVEENV), which is true precisely: - For U-Boot proper, when CONFIG_CMD_SAVEENV is set (because CONFIG_SAVEENV is a hidden config symbol that gets set if and only if CONFIG_CMD_SAVEENV is set). - For SPL, when CONFIG_SPL_SAVEENV is set. As a bonus, this also removes quite a few preprocessor conditionals. This has been run-time tested on a mpc8309-derived board to verify that saving the environment does indeed work in SPL with these patches applied. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-05-08sata: dwc_ahsata: Fix memory issue in reset_sataYe Li
The reset_sata should reset the sata device info and free the probe_ent memory. Otherwise, it will cause memory leak if we init the sata again. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-08sata: dwc_ahsata: Fix incorrect freeYe Li
Fix coverity issue CID 43665: Free of address-of expression (BAD_FREE) incorrect_free: free frees incorrect pointer pp. pp points the port array field of struct ahci_uc_priv, should not free it. Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-08sata: ahsata: Fix wrong operand for checking SERR DIAG_XYe Li
Fix coverity issue CID 3261683: Wrong operator used (CONSTANT_EXPRESSION_RESULT) operator_confusion: ({...; __v;}) | 67108864 is always 1/true regardless of the values of its operand. This occurs as the logical operand of ! When DIAG_X is set, the PHY COMINIT signal is detected, so should use '&' to check whether it is set. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-08sata: ahsata: Fix resource leakYe Li
Fix coverity issue CID 3606684: Resource leak (RESOURCE_LEAK) leaked_storage: Variable uc_priv going out of scope leaks the storage it points to Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-08Merge tag 'efi-2020-07-rc2-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc2-3 This series contains bug fixes and code simplifications. Following clarification in the discussion of the EBBR specification device trees will be passed as EfiACPIReclaimMemory to UEFI applications.
2020-05-08Merge branch '2020-05-07-more-kconfig-migrations'Tom Rini
- Migrate CONFIG_SET_DFU_ALT_INFO, CONFIG_SYS_MTDPARTS_RUNTIME and finish the rest of the memtest related options.
2020-05-08treewide: mem: Move mtest related defines to KconfigAshok Reddy Soma
Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-08treewide: mem: Enable MEMTEST via defconfigMichal Simek
There is no reason to enable MEMTEST from headers when was converted to Kconfig already. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-08treewide: mem: Remove alternate memtest setup from Mox and x530Michal Simek
The commit e89f8aae3d67 ("treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig") setup correct dependency on MEMTEST that's why there is no reason to enable enable alternate memtest without mtest command. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-08cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mappingMichal Simek
There is no real need to exactly define space for saving patterns for alternate memory test. It is much easier to allocate space on the stack and use it instead of trying to find out space where pattern should be saved. For example if you want to test the whole DDR memory you can't save patter to DDR and you need to find it out. On Xilinx devices DDR or OCM addresses were chosen but that means that OCM needs to be mapped and U-Boot has access permission there. It is easier to remove this limitation and simply save it on stack because it is very clear that memory test can't rewrite U-Boot and U-Boot has also full access to memory where runs from. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-05-08configs: migrate CONFIG_SYS_MTDPARTS_RUNTIME to defconfigsPatrick Delaunay
Move CONFIG_SYS_MTDPARTS_RUNTIME into Kconfig done by moveconfig.py. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-08configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigsPatrick Delaunay
Move CONFIG_SET_DFU_ALT_INFO into Kconfig done by moveconfig.py. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-05-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-07Merge branch '2020-05-07-atheros-phy-improvements'Tom Rini
2020-05-07efi_loader: crypto/pkcs7_parser.h is not a local includeHeinrich Schuchardt
User <> and not "" for referencing a global include. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-07efi_loader: pkcs7_parse_message() returns error pointerPatrick Wildt
Since pkcs7_parse_message() returns an error pointer, we must not check for NULL. We have to explicitly set msg to NULL in the error case, otherwise the call to pkcs7_free_message() on the goto err path will assume it's a valid object. Signed-off-by: Patrick Wildt <patrick@blueri.se> Add missing include linux/err.h Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-07efi_loader: efi_variable_parse_signature() returns NULL on errorPatrick Wildt
efi_variable_parse_signature() returns NULL on error, so IS_ERR() is an incorrect check. The goto err leads to pkcs7_free_message(), which works fine on a NULL ptr. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-05-07efi_loader: put device tree into EfiACPIReclaimMemoryHeinrich Schuchardt
According to the UEFI spec ACPI tables should be placed in EfiACPIReclaimMemory. Let's do the same with the device tree. Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: Grant Likely <grant.likely@arm.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-07efi_loader: use logical and in do_env_print_efi()Heinrich Schuchardt
If we want to check if two booleans are true, we should use a logical conjunction (&&) and not a bitwise and-operator (&). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-07efi_loader: do not unnecessarily use EFI_CALL()Heinrich Schuchardt
There is no need to call efi_get_variable() instead of efi_get_variable_common(). So let's use the internal function. Move forward declarations to the top of the file. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-07efi_loader: error handling in efi_set_variable_common().Heinrich Schuchardt
Fix unreachable code. Free memory on error. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-07efi_loader: remove redundant assignment in dp_fill()Heinrich Schuchardt
The value of dp is overwritten without being used. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2025-01-08 14:18:12 +0000