summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-21Merge git://git.denx.de/u-boot-shTom Rini
- Enable -ffunction-sections / -fdata-sections --gc-sections to SH - RCar Gen3 updates
2020-05-21efi_loader: check device path is not installed twiceHeinrich Schuchardt
Prior to corrective patches for virtio and SATA devices the same device path was installed on two different handles. This is not allowable. With this patch we will throw an error if this condition occurs for block devices. Update a comment for the installation of the simple file system protocol. Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: device path for SATA devicesHeinrich Schuchardt
Provide device path nodes for SATA devices. This avoids creation of two handles with the same device path indicating our root node. This is what the device paths for a SATA drive with four partitions could like: /VenHw(..)/Sata(0x0,0xffff,0x0) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(1,MBR,0x81ea591f,0x800,0x63ff830) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(2,MBR,0x81ea591f,0x6400800,0x9ff830) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(3,MBR,0x81ea591f,0x6e00800,0x16ef2ab0) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(4,MBR,0x81ea591f,0x1dcf3800,0x1dcedab0) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: device path for virtio block devicesHeinrich Schuchardt
The UEFI specification does not define a device sub-type for virtio. Let's use a vendor hardware node here. This avoids creation of two handles with the same device path indicating our root node. Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: initialize root node firstHeinrich Schuchardt
With commit 16ad946f41d3 ("efi_loader: change setup sequence") the detection of block device was moved to the start of the initialization sequence. In the case of virtio devices two handles with the same device path being created. The root node handle should be created before anything else. Reported-by: Ard Biesheuvel <ardb@kernel.org> Fixes: 16ad946f41d3 ("efi_loader: change setup sequence") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: add EFI_MEMORY_SP to memory attributesHeinrich Schuchardt
The UEFI 2.8 specification has introduced the EFI_MEMORY_SP memory attribute. Add it to the 'efidebug memmap' and 'efi mem' commands. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: Remove unnecessary debugPragnesh Patel
Remove unnecessary debug() from efi_set_variable_common(). native_name is NULL, so there is no meaning to print it. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-20Merge branch '2020-05-19-misc-fixes'Tom Rini
- Assorted minor fixes
2020-05-20sh: Enable ffunction-sections and fdata-sectionsMarek Vasut
Enable these two options to let compiler eliminate unused code. On R2Dplus, this results in considerable amount of saved space: text data bss dec hex filename - 266580 13196 39076 318852 4dd84 u-boot + 220214 12797 38745 271756 4258c u-boot Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20ARM: dts: rmobile: Enable eMMC DDR52 modes on Gen3 Salvator-X(S),ULCB,EbisuMarek Vasut
Enable DDR52 modes, since the SD core supports correct switching now. For completeness, list HS200 modes, however those were already enabled. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-05-20ARM: rmobile: Enable support for OpTee on Gen3Marek Vasut
Enable OpTee support on R-Car Gen3, so that U-Boot would copy the OpTee /firmware and /reserved-memory nodes into the Linux DT. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20ARM: rmobile: Merge prior-stage firmware DT fragment into U-Boot DT on Gen3Marek Vasut
The prior-stage firmware generates DT fragment containing the /firmware node, /reserved-memory node and /memory@ nodes. Merge these nodes into the U-Boot DT, so U-Boot can use this information. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20ARM: dts: rmobile: Reserve space in R-Car Gen3 DTsMarek Vasut
Reserve 4 kiB of space in R-Car Gen3 DTs when those DTs are compiled to permit patching in OpTee-OS /firmware node, /reserved-memory node and possibly also additional /memory@ nodes. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()Marek Vasut
Add weak function which is called right after fdtdec_setup() configured the U-Boot DT. This permits board-specific adjustments to the U-Boot DT before U-Boot starts parsing the DT. This could be used e.g. to patch in various custom nodes or merge in DT fragments from prior-stage firmware. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20libfdt: Export overlay_apply_node() as fdt_overlay_apply_node()Marek Vasut
This function is useful to merge a subset of DT into another DT, for example if some prior-stage firmware passes a DT fragment to U-Boot and U-Boot needs to merge it into its own DT. Export this function to permit implementing such functionality. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-19cmd: avb: free partition buffer upon verify completionGary Bisson
Doing the same as the unittests for libavb [1]. Allows to run 'avb verify' multiple times which can be useful after a failure to be able to re-flash the partition and try again. [1] https://android.googlesource.com/platform/external/avb/+/refs/tags/android-9.0.0_r37/test/avb_slot_verify_unittest.cc#156 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2020-05-19drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOCJan Kiszka
This driver is safe to use in SPL without relocation. Denying DM_FLAG_PRE_RELOC prevents its usability for verifying the main U-Boot or other artifacts from the SPL unless needless enabling the full driver set (SPL_OF_PLATDATA). Fixes: 17e117408571 ("drivers: crypto: rsa_mod_exp: avoid DM_FLAG_PRE_RELOC") CC: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Marek Vasut <marex@denx.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-05-19test: Use ut_asserteq_mem() where possibleSimon Glass
Quite a few tests still use ut_assertok(memcmp(...)) and variants. Modify them to use the macro designed for this purpose. Suggested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-05-19mpc83xx, abb: remove suvd3 boardHeiko Schocher
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19mpc83xx: remove redundant MPC83xx_RESET #defineRasmus Villemoes
This macro is only used (tested for existence) in mpc83xx.c, which unconditionally includes mpc83xx.h where it is unconditionally defined. Removing it makes the remaining code easier to read. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-05-19Merge branch '2020-05-18-reduce-size-of-common.h'Tom Rini
Bring in the latest round of Simon's changes to reduce what's in <common.h> overall.
2020-05-19configs: ls2080aqds_tfa_defconfig: enable DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2080AQDS board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT supportIoana Ciornei
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2080a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds the necessary DPMAC nodes (DPMAC 1-8) for protocol 42 (0x2A) on SD#1. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: ls2080aqds: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1088aqds_tfa_defconfig: enable DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088AQDS board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: ls1088aqds: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT supportIoana Ciornei
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2088a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds support for the on-board ports (DPMAC 1,2 and 4,5) found on the SERDES protocols 21(0x15) and 29(0x1d) for SD#1. On the LS1088AQDS board EMDIO1 is used with two onboard RGMII PHYs (Realtek RTL8211FD-CG), as well as 2 input/output connectors for mezzanine cards. Configuration signals from the Qixis FPGA control the routing of the external MDIOs. Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one of the 2 IO slots. As a consequence, a new node is added to describe register 0x54 as a MDIO mux controlled with child nodes describing all the IO slots as MDIO buses. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19include/configs: ls1046afrwy: add support for boot targets.Pramod Kumar
ls1046afrwy does not support sata boot. So Override default BOOT_TARGET_DEVICES and support only mmc, usb and dhcp as boot targets. Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19net: fsl-mc: fixup DPC: add /board/ports node if missingRazvan Ionut Cirjan
The DPC fixup for MAC address and enet_if is not made if /board/ports node is missing in DPC file. Add /board/ports or /ports nodes if them are missing. Signed-off-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Ioana Ciornei <Ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board_r: Detect ifc-nor flash at run-timePankit Garg
CONFIG_MTD_NOR_FLASH flag needs to be enable for all boot sources,as all flash drivers need to compile in TFA Boot.Probe ifc nor flash only when there is nor flash available on board.So needs to detect ifc-nor flash at run-time for probing. Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: lx2160aqds_tfa_defconfig: enable DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LX2160AQDS board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: lx2160aqds: implement board_fit_config_name_matchIoana Ciornei
In case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS for the current SERDES protocol configuration. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: lx2160aqds: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: lx2160aqds: add nodes describing possible mezzanine cardsIoana Ciornei
Add device trees describing possible uses of mezzanine cards depending on the SERDES protocol employed. This patch adds DPAA2 networking support for the following protocols on each SERDES block: * SD #1: 3, 7, 19, 20 * SD #2: 11 Each SERDES block has a different device tree file per protocol supported, where the IO SLOTs used are enabled and PHYs located on the mezzanine cards are described. Also, dpmac nodes are edited and their associated phy-connection-type and phy-handle are added. Top DTS files are also added for each combination of protocol on the 3 SERDES blocks. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: lx2160aqds: add MDIO slotsIoana Ciornei
The LX2160A processor has two external MDIO interfaces, described in the DTS as emdio1 and emdio2. On the LX2160AQDS board EMDIO1 is used with two onboard RGMII PHYs (Realtek RTL8211FD-CG), as well as eight input/output connectors for mezzanine cards. Configuration signals from the Qixis FPGA control the routing of the external MDIOs. Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one of the 8 IO slots. As a consequence, a new node is added to describe register 0x54 as a MDIO mux controlled with child nodes describing all the IO slots as MDIO buses. Also, DPMAC 17 and 18 are updated to reference the on-board PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: lx2160a: add noted for dpmacs 1, 2, 5-6Ioana Ciornei
Add nodes for DPMACs 1, 2 and 5-6 which were missing from the description. These will be later used on the LX2160AQDS specific DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19drivers: net: fsl-mc: fixup msi-map propertyLaurentiu Tudor
Similarly to iommu-map, the msi-map property must also be fixed up in the device tree, in order for the icid -> streamid translation be possible in the MSI case as well. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19driver: net: fm: minor fix in DM ETH supportMadalin Bucur
Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Unset ENV_ADDR valueKuldeep Singh
LS1012A-FRWY and LS1012A-RDB crashes in flash environment when CONFIG_ENV_ADDR value is set. Unset the config value in *_tfa_defconfig* to resolve booting crash. Following crash is observed: Using SERDES1 Protocol: 13576 (0x3508) "Synchronous Abort" handler, esr 0x96000006 elr: 00000000820452c0 lr : 0000000082013f54 (reloc) elr: 00000000b7b932c0 lr : 00000000b7b61f54 x0 : 0000000000000000 x1 : 000000007604e004 x2 : 0000000000000001 x3 : 0000000000000000 ... Code: 54ffff80 9100c000 17fffff7 f9402241 (3860c820) Resetting CPU ... Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: nxp: Enable CONFIG_SYS_RELOC_GD_ENV_ADDRKuldeep Singh
Commit 323d3af59fe4 ("configs: ls1012ardb: Enable CONFIG_SYS_RELOC_GD_ENV_ADDR") enables the config only for LS1012ARDB. Apart from LS1012A-RDB, other platforms such as LS1012A-FRWY, LS2088A and LS1046A-RDB/FRWY also require this config to be enabled. This also helps in resolving booting crash observed in flash environment. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Reduce CONFIG_ENV_SIZE to 0x2000Ashish Kumar
All LS1012A board variants have same CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE values. If both config values are same, flash environment cannot be saved. Since, CONFIG_ENV_SECT_SIZE needs to be same as that of flash sector size, this entry cannot be changed. Reduce CONFIG_ENV_SIZE value to 0x2000. This also helps in making config value aligned with other boards environemt size. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Ashish Kumar <Ashish.kumar@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN sizeKuldeep Singh
CONFIG_SYS_MALLOC_LEN is currently set to low value and leaves very less space to do malloc in flash environmet. Increase the value to get more memory and also make it align with other boards(ls1046a, ls1043a etc.) config values. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls2080ardb: Make BOOT command access flash memory as per spi-memKuldeep Singh
BOOT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls2080ardb: Make MC_INIT access flash memory as per spi-memKuldeep Singh
MC_INIT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1046a: Define ENV_ADDR valueKuldeep Singh
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. The macro value is already defined in ls1046ardb_tfa_defconfig, also define the value as 0x40300000 in qspi_defconfig. ls1046aqds has one spansion flash "S25FL128S_64K" of size 16M with sector size 64K. Correct ENV_ADDR and ENV_SECT_SIZE value for QSPI and TFA defconfigs of the board. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls2080a: Correct ENV_ADDR valueKuldeep Singh
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. QSPI region in LS2088ARDB and LS2088AQDS starts from 0x20000000 offset. Correct the config value i.e 0x80500000 -> 0x20500000. Also, define config value as 0x20300000 in qspi defconfig. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1088a: Correct ENV_ADDR valueKuldeep Singh
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. QSPI region starts from 0x20000000 offset. Correct the config value i.e 0x80500000 -> 0x20500000. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19treewide: Update fsl qspi node dt properties as per spi-mem driverKuldeep Singh
According to new qspi driver, some properties like "bus-num, num-cs, big-endian" are no longer used. Device endiannes can be determined from device-type data in driver. Now use board specific compatibles, generic node names and specific labels to align with linux device-tree properties. Also consolidate spi-max-frequency to 50Mhz treewide. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1046a: Move SPI_FLASH_SPANSION to defconfigKuldeep Singh
Enable CONFIG_SPI_FLASH_SPANSION in defconfigs of LS1046ARDB and LS1046AQDS which have two spansion flases i.e s25fs512s each of size 64M. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>