summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-23tools: Drop duplicate raise_on_error argumentSimon Glass
If kwargs contains raise_on_error then this function generates an error due to a duplicate argument. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-23cbfs: Rename checksum to attributes_offsetSimon Glass
It seems that this field has been renamed in later version of coreboot. Update it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-23cbfs: Add an enum and comment for the magic numberSimon Glass
This field is not commented in the original file. Add a comment. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-23x86: Add ifwitool for Intel Integrated Firmware ImageSimon Glass
Some Intel SoCs from about 2016 boot using an internal microcontroller via an 'IFWI' image. This is a special format which can hold firmware images. In U-Boot's case it holds u-boot-tpl.bin. Add this tool, taken from coreboot, so that we can build bootable images on apollolake SoCs. This tool itself has no tests. Some amount of coverage will be provided by the binman tests that use it, so enable building the tool on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-23Merge tag 'u-boot-stm32-20190723' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add rtc driver for stm32mp1 - add remoteproc driver for stm32mp1 - use kernel qspi compatible string for stm32
2019-07-23Merge tag 'rockchip-for-v2019.07-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399 sdhci driver fixup - TPL BANNER fixup
2019-07-22rockchip: TPL banner should depend on CONFIG_TPL_BANNER_PRINTChris Webb
The generic code in common/spl/spl.c allows TPL/SPL banners to be silenced by unsetting CONFIG_TPL_BANNER_PRINT or CONFIG_SPL_BANNER_PRINT respectively. However, arch/arm/mach-rockchip/tpl.c prints this banner unconditionally. Fix the rockchip-specific tpl.c so that the TPL banner depends on CONFIG_TPL_BANNER_PRINT in the same way as the generic code. Signed-off-by: <chris@arachsys.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-22rockchip: Fix TPL build without CONFIG_TPL_SERIAL_SUPPORTChris Webb
If CONFIG_DEBUG_UART is set but CONFIG_TPL_SERIAL_SUPPORT is not, the serial output should be available in SPL and full U-Boot, but not built in TPL. However, the rockchip tpl.c instead fails to compile with undefined references to the debug UART. Instead, initialise the debug UART and print the TPL banner only if both CONFIG_DEBUG_UART and CONFIG_TPL_SERIAL_SUPPORT are set. Signed-off-by: <chris@arachsys.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-22rtc: Add rtc driver for stm32mp1Patrick Delaunay
Add support of STM32MP1 rtc driver. Enable it for basic and trusted configurations. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
2019-07-22clk: stm32mp1: Add RTC clock entryPatrick Delaunay
Add RTCAPB and RTC clock support. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-22doc: device-tree-bindings: alignment with v5.2-rc6 for spi-stm32-qspi.txtPatrice Chotard
Align doc/device-tree-bindings/spi/spi-stm32-qspi.txt with kernel v5.2-rc6 Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22spi: stm32_qspi: Remove "st, stm32-qspi" compatible stringPatrice Chotard
"st,stm32-qspi" is no more used, remove it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22ARM: dts: stm32: Use kernel qspi compatible string for ↵Patrice Chotard
stm32f469-disco-uboot.dtsi For STM32 QSPI driver, "st,stm32-qspi" compatible string was first introduced in U-boot. But later in kernel side, "st,stm32f469-qspi" was used. To simplify, align U-boot QSPI compatible string with kernel one. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22ARM: dts: stm32: Use kernel qspi compatible string for stm32f7-uboot.dtsiPatrice Chotard
For STM32 QSPI driver, "st,stm32-qspi" compatible string was first introduced in U-boot. But later in kernel side, "st,stm32f469-qspi" was used. To simplify, align U-boot QSPI compatible string with kernel one. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22configs: stm32mp15: enable stm32 remoteprocPatrick Delaunay
Activate the remote processor support for stm32mp15 configs. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22MAINTAINERS: Add stm32 remoteproc driverFabien Dessenne
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22remoteproc: Introduce STM32 Cortex-M4 remoteproc driverFabien Dessenne
This patch introduces support of Cortex-M4 remote processor for STM32 MCU and MPU families. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22remoteproc: add elf file load supportFabien Dessenne
The current implementation supports only binary file load. Add helpers to support ELF32 format (sanity check, and load). Note that since an ELF32 image is built for the remote processor, the load function uses the device_to_virt ops to translate the addresses. Implement a basic translation for sandbox_testproc. Add related tests. Test result: => ut dm remoteproc_elf Test: dm_test_remoteproc_elf: remoteproc.c Test: dm_test_remoteproc_elf: remoteproc.c (flat tree) Failures: 0 Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-22remoteproc: add device_to_virt opsFabien Dessenne
Introduce the device_to_virt function to allow translation between device address (remote processor view) and virtual address (main processor view). Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-22remoteproc: fix function headersFabien Dessenne
Add full function comment headers. Fix rproc_is_initialized() return value description. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-22dm: core: Introduce xxx_translate_dma_address()Fabien Dessenne
Add the following functions to translate DMA address to CPU address: - dev_translate_dma_address() - ofnode_translate_dma_address() - of_translate_dma_address() - fdt_translate_dma_address() These functions work the same way as xxx_translate_address(), with the difference that the translation relies on the "dma-ranges" property instead of the "ranges" property. Add related test. Test report: => ut dm fdt_translation Test: dm_test_fdt_translation: test-fdt.c Test: dm_test_fdt_translation: test-fdt.c (flat tree) Failures: 0 Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-21Merge tag 'rockchip-for-v2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399 lpddr4 support - rk3399-rock960 board support improvement - Eliminate pyelftools dependency by make_fit_atf.py - clean up rockchip dts to use -u-boot.dtsi - use ARM arch/generic timer instead of rk_timer - clean up Kconfig options for board support
2019-07-20rockchip: sdhci: Fix sdhci mmc driver probe abortKever Yang
This patch fix mmc driver abort caused by below patch: 3d296365e4 mmc: sdhci: Add support for sdhci-caps-mask After the patch sdhci_setup_cfg() access to host->mmc->dev, so we have to do init before make the call to the function() Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Remove obsolete references to pyelftoolsChris Webb
make_fit_atf.py no longer requires pyelftools, and nothing else in the rockchip build requires it either, so remove references to installing it from the documentation. Signed-off-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20rockchip: make_fit_atf.py: Eliminate pyelftools dependencyChris Webb
make_fit_aft.py depends on the non-standard library pyelftools to pull out PT_LOAD segments from ELF files. However, this is as easy to do manually, without imposing the extra dependency on users. Structures in the ELF file are unpacked into variables named to exactly match the ELF spec to ensure the destructuring code is reasonably self-documenting. Signed-off-by: Chris Webb <chris@arachsys.com> Reviewed-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20rockchip: enable rk322x TPL_BOOTROM_SUPPORT in KconfigKever Yang
The TPL_BOOTROM_SUPPORT is needed for boot from bootrom like other storages. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: video: rk3288_hdmi: Add missing call to dw_hdmi_enable()Niklas Schulze
The RK3288 HDMI driver's rk3288_hdmi_enable() currently lacks a call to dw_hdmi_enable(). Thus, the HDMI output never gets enabled. Signed-off-by: Niklas Schulze <me@jns.io> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-07-20rockchip: rk3399: use common TPL board fileKever Yang
Use common tpl.c instead of rk3399-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: remove TPL_BOARD_INITKever Yang
RK3399 TPL do not need a dedicate board init, print the firmware info when debug init instead. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: use common secure_timer_init() for spl/tplKever Yang
SPL/TPL share the same secure_timer_init(), update to use one copy source code and update to use CONFIG_ROCKCHIP_STIMER_BASE as base address and rename to function name to rockchip_stimer_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: use common TPL board fileKever Yang
Use common tpl.c instead of rk3368-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use common TPL board fileKever Yang
Use Common tpl.c instead of rk3288-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use common TPL board fileKever Yang
Use Common tpl.c instead of rk322x-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: add common tpl board fileKever Yang
Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most of SoCs to avoid copy-pase for different SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: evb-px5: switch to use ARM generic timerKever Yang
Default to use ARM generic timer in ARM64, switch from rk timer to generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368-lion: switch to use ARM generic timerKever Yang
Default to use ARM generic timer in ARM64, switch from rk timer to generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: enable stimer for rk3368Kever Yang
Add stimer_init() for spl/tpl so that we able to switch to use arch timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: move sgrf init to spl as arch_cpu_init()Kever Yang
The SoC related init will move to SPL and keep TPL clean, so that we can reuse the common TPL board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: remove rk_timerKever Yang
We have convert all SoC to use DM timer or ARM arch/generic timer, we can remove this rk_timer now. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: remove no use header file in board codeKever Yang
The timer.h is no use any more, remove it from the board files. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3128: use ARM arch timer instead of rk_timerKever Yang
We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track to boot time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use ARM arch timer instead of rk_timerKever Yang
We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track to boot time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3036: use ARM arch timer instead of rk_timerKever Yang
We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track the boot time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3036: sdram: use udelay instead of rockchip_udelayKever Yang
Use system api for udelay instead of vendor defined api, and rockchip_udelay() will be removed. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use ARM arch timer instead of rk_timerKever Yang
We prefer to use ARM arch timer instead of rockchip timer, so that we are using the same timer for SPL, U-Boot and Kernel, which will make things simple and easy to track to boot time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: sdram: use udelay instead of rockchip_udelayKever Yang
Use system api for udelay instead of vendor defined api, and rockchip_udelay() will be removed. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: board: rk3288: remove board_boot_order()Kever Yang
Prefer to use dts config instead, remove all board_boot_order() for rk3288 boards. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: dts: enable spl-boot-orderKever Yang
We share the same default SPL boot order for all rk3288 boards, use dts instead of hard code in board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: spl-boot-order: update dependency to OF_LIBFDTKever Yang
The fdt interfaces are actuall depends on OF_LIBFDT instead of OF_CONTROL, some boards may enable OF_CONTROL while disable OF_LIBFDT. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: popmetal-rk3288: add -u-boot.dtsiKever Yang
Move U-Boot relate dts node/property into -u-boot.dtsi Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2025-01-07 10:32:28 +0000