summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-07serial: punt unused serial_addr()Mike Frysinger
Only one file apparently defines this function, and it merely stubs it out. So if no one is defining/calling it, punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-07update include/asm/ gitignore after moveMike Frysinger
With the cpu include paths moved, the gitignore paths need updating. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Tom Rix <tom@bumblecow.com>
2010-05-07Fixup native builds on powerpcKumar Gala
When we changed ARCH from ppc to powerpc we need to treat HOSTARCH the same way. We use HOSTARCH == ARCH to determine if a build is native. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-06cmd_usb.c: show cmd usage if no args givenSerge Ziryukin
Signed-off-by: Serge Ziryukin <ftrvxmtrx@gmail.com>
2010-05-06powerpc: Consolidate bootcount_{store|load} for PowerPCStefan Roese
This patch consolidates bootcount_{store|load} for PowerPC by implementing a common version in arch/powerpc/lib/bootcount.c. This code is now used by all PowerPC variants that currently have these functions implemented. The functions now use the proper IO-accessor functions to read/write the values. This code also supports two different bootcount versions: a) Use 2 separate words (2 * 32bit) to store the bootcounter b) Use only 1 word (2 * 16bit) to store the bootcounter Version b) was already used by MPC5xxx. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> for 83xx parts Cc: Michael Zaidman <michael.zaidman@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Anatolij Gustschin <agust@denx.de>
2010-05-06Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk
2010-05-06drivers/*/Makefile: fix conditional compile rule.Ender.Dai
Fix conditional compile rule for twl4030.c and videomodes.c. Signed-off-by: Ender.Dai <ender.dai@gmail.com>
2010-05-06Move test for unnecessary memmove to memmove_wd()Larry Johnson
Signed-off-by: Larry Johnson <lrj@acm.org>
2010-05-06compiler.h: add uint typedefMike Frysinger
Recent crc changes started using the "uint" type in headers that are used on the build system. This subsequently broke mingw targets as they do not provide such a type. So add this basic typedef to compiler.h so that we do not have to worry about this breaking again in the future. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-06command.c: Enable auto tab for the editenv commandTrübenbach, Ralf
Enable the auto completion (with TAB) of the environment variable name after the editenv command. Signed-off-by: Ralf Trübenbach <ralf.truebenbach@men.de>
2010-05-0674xx_7xx: CPCI750: Add ECC support on esd CPCI-CPU/750 boardReinhard Arlt
Add ECC support for DDR RAM for MV64360 on esd CPCI-CPU/750 board. This patch also adds the "pldver" command to display the CPLD revision. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2010-05-06sc520: Fix minor DRAM Controller Setup bugGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06sc520: Update to new AMD CopyrightGraeme Russ
AMD recently changed the licensing of the RAM sizing code to the GPLv2 (or at your option any later version) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Implement eNET WatchdogGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Use SC520 MMCR to reset eNET boardGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Add PC/AT compatibility setup functionGraeme Russ
The eNET uses the sc520 software timers rather than the PC/AT clones Set all interrupts and timers up to be PC/AT compatible Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Add support for onboard RTL8100B (RTL8139) chipsGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06sc520: Board Specific PCI InitGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06sc520: Move PCI defines to PCI include fileGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Fix CONFIG_SYS_HZ to be 1000Graeme Russ
The clock interupt has always been 1kHz as per timer_init() in /arch/i386/cpu/sc520/sc520_timer.c Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06eNET: Fix Flash WriteGraeme Russ
Onboard AMD Flash chip does not support buffered writes Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06sc520: Allow boards to override udelayGraeme Russ
If the board has a high precision mico-second timer, it maked sense to use it instead of the on-chip one Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Fix support for booting bzImageGraeme Russ
Add support for newer (up to 2.6.33) kernels Add zboot command which takes the address of a bzImage as its first argument and (optionally) the size of the bzImage as the second argument (the second argument is needed for older kernels which do not include the bzImage size in the header) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Provide weak PC/AT compatibility setup functionGraeme Russ
It is possibly to setup x86 boards to use non-PC/AT configurations. For example, the sc520 is an x86 CPU with PC/AT and non-PC/AT peripherals. This function allows the board to set itself up for maximum PC/AT compatibility just before booting the Linux kernel (the Linux kernel 'just works' if everything is PC/AT compliant) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Use CONFIG_SERIAL_MULTIGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06SERIAL: Enable port-mapped accessGraeme Russ
The x86 architecture exclusively uses Port-Mapped I/O (inb/outb) to access the 16550 UARTs. This patch mimics how Linux selects between Memory-Mapped and Port-Mapped I/O. This allows x86 boards to use CONFIG_SERIAL_MUTLI and drop the custom serial port driver Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Fix copying of Real-Mode code into RAMGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Pass relocation offset into Global DataGraeme Russ
In order to locate the 16-bit BIOS code, we need to know the reloaction offset. Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Move GDT to a safe location in RAMGraeme Russ
Currently, the GDT is either located in FLASH or in the non-relocated U-Boot image in RAM. Both of these locations are unsafe as those locations can be erased during a U-Boot update. Move the GDT into the highest available memory location and relocate U-Boot to just below it Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Add RAM bootstrap functionalityGraeme Russ
Add a parameter to the 32-bit entry to indicate if entry is from Real Mode or not. If entry is from Real Mode, execute the destructive 'sizer' routine to determine memory size as we are booting cold and running in Flash. If not entering from Real Mode, we are executing a U-Boot image from RAM and therefore the memory size is already known (and running 'sizer' will destroy the running image) There are now two 32-bit entry points. The first is the 'in RAM' entry point which exists at the start of the U-Boot binary image. As such, you can load u-boot.bin in RAM and jump directly to the load address without needing to calculate any offsets. The second entry point is used by the real-to-protected mode switch This patch also changes TEXT_BASE to 0x6000000 (in RAM). You can load the resulting image at 0x6000000 and simple go 0x6000000 from the u-boot prompt Hopefully a later patch will completely elliminate any dependency on TEXT_BASE like a relocatable linux kernel (perfect world) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Split sc520 memory sizing versus reportingGraeme Russ
This patch allows the low-level assembler boot-strap to obtain the RAM size without calling the destructive 'sizer' routine. This allows boot-strapping from a U-Boot image loaded in RAM Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Fix sc520 memory size reportingGraeme Russ
There is an error in how the assembler version of the sc520 memory size reporting code works. As a result, it will only ever report at most the size of one bank of RAM Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Fix do_go_exec()Graeme Russ
This was broken a long time ago by a49864593e083a5d0779fb9ca98e5a0f2053183d which munged the NIOS and x86 do_go_exec() Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Add register dump to crash handlersGraeme Russ
Shamelessly steal the Linux x86 crash handling code and shove it into U-Boot (cool - it fits). Be sure to include suitable attribution to Linus Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Fix MMCR AccessGraeme Russ
Change sc520 MMCR Access to use memory accessor functions Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: #ifdef out getenv_IPaddr()Graeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06x86: Add unaligned.hGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06POST: Added ECC memory test for mpc83xx.Michael Zaidman
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com> Fixed minor coding style issue. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-05cmd_onenand.c: moved to standard subcommand handlingFrans Meulenbroeks
On the fly also fixed the following things: - write help talked about a parameter oob, but that one was not used, so removed it from the help message. - the test command also allowed a force subcommand but didn't use it. eliminated the code. - do_onenand made static - do_onenand contained int blocksize; ... mtd = &onenand_mtd; this = mtd->priv; blocksize = (1 << this->erase_shift); As blocksize was not used the last two statements were unneeded so removed them. The first statement (mtd = ....) assigns to a global. Not sure if it is needed, and since I could not test this, left the line for now Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-05-05ppc: unused memory region too close to current stack pointerNorbert van Bolhuis
This avoids a possible overwrite of the (end of) ramdisk by u-boot. The unused memory region for ppc boot currently starts 1k below the do_bootm->bootm_start->arch_lmb_reserve stack ptr. This isn't enough since do_bootm->do_bootm_linux->boot_relocate_fdt calls printf which may very well use more than 1k stack space. Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
2010-05-05allow print_size to print large numbers on 32-bit systemsTimur Tabi
Modify print_size() so that it can accept numbers larger than 4GB on 32-bit systems. Add support for display terabyte, petabyte, and exabyte sizes. Change the output to use International Electrotechnical Commission binary prefix standard. Signed-off-by: Timur Tabi <timur@freescale.com>
2010-05-05fix print_size printing fractional gigabyte numbers on 32-bit platformsTimur Tabi
In print_size(), the math that calculates the fractional remainder of a number used the same integer size as a physical address. However, the "10 *" factor of the algorithm means that a large number (e.g. 1.5GB) can overflow the integer if we're running on a 32-bit system. Therefore, we need to disassociate this function from the size of a physical address. Signed-off-by: Timur Tabi <timur@freescale.com>
2010-05-05Blackfin: TWI/I2C: implement multibus supportMike Frysinger
In order to do this cleanly, the register accesses have to be converted to a C struct (base pointer), so do that in the process. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-04configs: remove unused CONFIG_COMMAND_HISTORYKim Phillips
$ git grep CONFIG_COMMAND_HISTORY CHANGELOG: CONFIG_COMMAND_HISTORY include/configs/AP1000.h:#define CONFIG_COMMAND_HISTORY 1 include/configs/keymile-common.h:#define CONFIG_COMMAND_HISTORY 1 include/configs/manroland/common.h:#define CONFIG_COMMAND_HISTORY 1 $ Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Heiko Schocher <hs@denx.de>
2010-05-04mvsmr: fix link errorAnatolij Gustschin
MVSMR board support doesn't link since recent rework of U-Boot directory structure. Fix it now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Andre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Fixed merge conflict Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-05-03Blackfin: bfin_mac: hook up new write_hwaddr functionMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: ethoc: add write_hwaddr supportThomas Chou
Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03net: altera_tse: add write_hwaddr supportThomas Chou
Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-27 02:05:39 +0000