summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-08binman: Don't show image-skip message by defaultSimon Glass
This message is not very important since it is simply indicating that the user's instructions are being followed. Only show it when the verbosity level is above the default. Also drop the unnecessary extra newline on this message, which causes two line breaks. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08binman: Don't generate an error in 'text' entry constructorSimon Glass
It is not good practice to raise an exception in a constructor. In this case the 'text' entry may not actually be used, if -i is used to filter out the images that get built. Move the exception to where the data is actually used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-07net: phy: realtek: Introduce quirk to mark RXC not stoppableCarlo Caione
When EEE is supported by the PHY and the driver allows it, libphy in the kernel is configuring the PHY to stop receiving the xMII clock while it is signaling LPI. While this (usually) works fine in the kernel this is causing issues in U-Boot when rebooting from the linux kernel with this bit set (without having the possibility to reset the PHY) where the PHY suddenly stops working. A new quirk is introduced to unconditionally reset this bit. If the quirk is not enabled using the proper configuration symbol, the PHY state is not changed. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-07cmd: mdio: Switch to generic helpers when accessing the registersCarlo Caione
Switch to use the generic helpers to access the MMD registers so that we can used the same command also for C45 PHYs, C22 PHYs with direct and indirect access and PHYs implementing a custom way to access the registers. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-07net: phy: ti: use generic helpers to access MMD registersCarlo Caione
Now that generic helpers are available, use those instead of relying on ti specific functions. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-07net: phy: Add generic helpers to access MMD PHY registersCarlo Caione
Two new helper functions (phy_read_mmd() and phy_write_mmd()) are added to allow access to the MMD PHY registers. The MMD PHY registers can be accessed by several means: 1. Using two new MMD access function hooks in the PHY driver. These functions can be implemented when the PHY driver does not support the standard IEEE Compatible clause 45 access mechanism described in clause 22 or if the PHY uses its own non-standard access mechanism. 2. Direct access for C45 PHYs and C22 PHYs when accessing the reachable DEVADs. 3. The standard clause 45 access extensions to the MMD registers through the indirection registers (clause 22) in all the other cases. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-07efi_loader: signature of ExitBootServices()Heinrich Schuchardt
Consistently use efi_uintn_t as type of memory keys. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <graf@amazon.com>
2019-05-07efi_loader: LoadImage() check source sizeHeinrich Schuchardt
If the size of the source buffer is 0, return EFI_LOAD_ERROR. (UEFI SCT II 2017: 3.4.1 LoadImage() - 5.1.4.1.6) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: LoadImage() check parent imageHeinrich Schuchardt
If the parent image handle does not refer to a loaded image return EFI_INVALID_PARAMETER. (UEFI SCT II 2017: 3.4.1 LoadImage() - 5.1.4.1.1) Mark our root node as a loaded image to avoid an error when using it as parent image. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: HandleProtocol parameter checksHeinrich Schuchardt
HandleProtocol() and OpenProtocol() have to return EFI_UNSUPPORTED if the protocol is not installed on the handle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: use EFI_PRINT instead of debugHeinrich Schuchardt
For correct indentation of messages in the UEFI API implementation use EFI_PRINT() instead of debug(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: CloseProtocol() requires valid agent handleHeinrich Schuchardt
Return EFI_INVALID_PARAMETER from CloseProtcol() if the agent handle is not valid. Return EFI_INVALID_PARAMETER if the optional controller handle is not valid. Return immediately from efi_search_obj if the handle is NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_selftest: unit test for RegisterProtocolNotify()Heinrich Schuchardt
Provide a unit test for the RegisterProtocolNotify() boot service. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: implement RegisterProtocolNotify()Heinrich Schuchardt
The RegisterProtocolNotify() boot service registers an event to be notified upon the installation of a protocol interface with the specified GUID. Add the missing implementation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: EVT_NOTIFY_SIGNAL eventsHeinrich Schuchardt
The notification function of events of type EVT_NOTIFY_SIGNAL should always be queued when SignalEvent() is called. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_selftest: remove redundant function efi_st_memcmp()Heinrich Schuchardt
Function memcmp() is available in efi_freestanding.c. So we do not remove a further implementation. Replace all usages of efi_st_memcmp() by memcmp(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: unload applications upon Exit()Heinrich Schuchardt
Implement unloading of images in the Exit() boot services: * unload images that are not yet started, * unload started applications, * unload drivers returning an error. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: implement UnloadImage()Heinrich Schuchardt
Implement the UnloadImage() boot service Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: move efi_unload_image() down in sourceHeinrich Schuchardt
Move efi_unload_image() down in source to avoid forward declaration in follwing page. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: mark started imagesHeinrich Schuchardt
In UnloadImage() we need to know if an image is already started. Add a field to the handle structure identifying loaded and started images. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: correct parameter check in LocateHandle()Heinrich Schuchardt
If LocateHandle() does not find an entry EFI_NOT_FOUND has to be returned even if BufferSize is NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_loader: allowable event types in CreateEventEx()Heinrich Schuchardt
CreateEventEx() does not allow the following event types: * EVT_SIGNAL_EXIT_BOOT_SERVICES * EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE This check is needed to pass the UEFI SCT conformance test. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-05-07efi_loader: clean up UEFI sub-system initializationHeinrich Schuchardt
allow_unaligned(), switch_to_non_secure_mode(), and efi_init_obj_list() are called in sequence in multiple places. Move calls to allow_unaligned() and switch_to_non_secure_mode() to efi_init_obj_list(). Remove unused includes. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- RZ/A1 addition. - Old board removal.
2019-05-07Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Assorted stratix10 fixes. - DDR driver DM migration.
2019-05-07ARM: dts: renesas: Add RZ/A1 GR-Peach boardChris Brandt
Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach, which is a cheap development platform with RZ/A1H SoC. The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Currently supported are UART, ethernet and RPC SPI. The board can be booted from RPC SPI by writing the u-boot.bin binary to the beginning of the SPI NOR, e.g. using the "sf" command. The board can also be booted via JTAG by setting text base to 0x20020000, loading u-boot.bin there via JTAG and executing it from that address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07ARM: dts: renesas: Add RZ/A1 platform codeChris Brandt
Add platform code and DTs for Renesas RZ/A1 R7S72100 SoC. Distinguishing feature of this SoC is that it has up to 10 MiB of on-SoC static RAM (SRAM). The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07spi: rpc: Add support for operation without clock frameworkMarek Vasut
Add ifdeffery to allow operation without the clock framework enabled. This is required on RZ/A1, as it does not have clock driver yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07net: sh_eth: Add support for operation without clock frameworkMarek Vasut
Add ifdeffery to allow operation without the clock framework enabled. This is required on RZ/A1, as it does not have clock driver yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07net: sh_eth: Add RZ/A1 supportMarek Vasut
Add support for RZ/A1 SoC specifics. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07serial: sh: Add RZ/A1 supportMarek Vasut
Add support for RZ/A1 SoC specifics. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07timer: renesas: Add RZ/A1 R7S72100 OSTM timer driverMarek Vasut
Add OSTM timer driver for RZ/A1 SoC. The IP is very different from the R-Car Gen2/Gen3 one already present in the tree, hence a custom driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07pinctrl: renesas: Add RZ/A1 R7S72100 pin control driverMarek Vasut
Add pin control driver for RZ/A1 SoC. The IP is very different from the R-Car Gen2/Gen3 one already present in the tree, hence a custom driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07gpio: renesas: Add RZ/A1 R7S72100 GPIO driverMarek Vasut
Add GPIO driver for RZ/A1 SoC. The IP is very different from the R-Car Gen2/Gen3 one already present in the tree, hence a custom driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07sh: 7785: Remove CPU supportMarek Vasut
There are no more boards using this CPU and there is no prospect of any boards showing up soon, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07sh: sh7785lcr: Remove the boardMarek Vasut
Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07sh: 7724: Remove CPU supportMarek Vasut
There are no more boards using this CPU and there is no prospect of any boards showing up soon, remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07sh: ecovec: Remove the boardMarek Vasut
Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07sh: sh7757lcr: Fix copy-paste error in READMEMarek Vasut
Update the README to use the correct defconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-06Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Various pinctrl / gpio fixes for R-Car
2019-05-06Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- Important spi-mem fix
2019-05-06ARM: socfpga: stratix10: Probe FPGA status before bridge enableAng, Chee Hong
Send CONFIG_STATUS and RECONFIG_STATUS mailbox commands to Secure Device Manager (SDM) to get the status of FPGA and make sure the FPGA is in user mode before enable the bridge. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-05-06ARM: socfpga: stratix10: Disable FPGA2SOC resetAng, Chee Hong
Software must never reset FPGA2SOC bridge. This bridge must only be reset by POR/COLD/WARM reset. Asserting the FPGA2SOC reset by software can cause the SoC to lock-up if there are traffics being drived into FPGA2SOC bridge. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-05-06arm: socfpga: Move Stratix 10 SDRAM driver to DMLey Foon Tan
Convert Stratix 10 SDRAM driver to device model. Get rid of call to socfpga_per_reset() and use reset framework. SPL is changed from calling function in SDRAM driver directly to just probing UCLASS_RAM. Move sdram_s10.h from arch to driver/ddr/altera directory. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06arm: dts: Stratix10: Add SDRAM nodeLey Foon Tan
Add SDRAM device tree node. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06ddr: altera: Compile ALTERA SDRAM in SPL onlyLey Foon Tan
Compile ALTERA_SDRAM driver in SPL only. Rename ALTERA_SDRAM to SPL_ALTERA_SDRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-05Merge branch '2019-05-05-master-imports'Tom Rini
- Various assorted fixes - btrfs zstd compression support - Enable hardware DDR levelling on am43xx platforms. - pl310 cache controller driver
2019-05-05env: add missing newlinePhilip Molloy
Signed-off-by: Philip Molloy <philip@philipmolloy.com>
2019-05-05board: toradex: drop support.arm maintainer emailMarcel Ziswiler
Drop Toradex ARM Support <support.arm@toradex.com> from maintainer email list as this just clogs our support ticketing system. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com>
2019-05-05cmd: pxe: add board specific PXE default pathMarek Behún
The list of PXE default paths contains ARCH and SOC specific paths, but one PXE server can serve different board with the same ARCH and SOC. This is the case for Turris Omnia and Turris Mox, where ARCH=arm and SOC=mvebu. If CONFIG_SYS_BOARD is defined, also try "default-$ARCH-$SOC-$BOARD" path. Signed-off-by: Marek Behún <marek.behun@nic.cz>
generated by cgit (git 2.34.1) at 2025-02-13 18:19:41 +0000