summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-01-28Marvell 88E1118 interrupt fixRon Madrid
This patch adjusts the LED control so that interrupt lines are not reading LEDs and effectively causing indefinite interrupts to the controller. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-01-28net: smc911x.c: Add LAN9211 to chip_ids[] arrayStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-01-28Move is_valid_ether_addr() to include/net.hMike Frysinger
Import the is_valid_ether_addr() function from the Linux kernel. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-01-28net: Sort Makefile labelsMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-01-28Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2009-01-2885xx: Fix compile breakage with sbc8540 and sbc8560Wolfgang Denk
This fixes an error which raises just a warning: sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-01-28SPD823TS: do not define CONFIG_CMD_ENVMike Frysinger
Since the SPD823TS board does not actually have any writable flash to save its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is disabled. This fixes the build error: common/libcommon.a(cmd_nvedit.o): In function `do_saveenv': common/cmd_nvedit.c:557: undefined reference to `saveenv' make: *** [u-boot] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28OMAP3: Add Zoom1 board supportDirk Behme
Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here: http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28OMAP3: Add Pandora supportDirk Behme
Add Pandora support. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28OMAP3: Add EVM boardDirk Behme
Add EVM board support. Signed-off-by: Manikandan Pillai <mani.pillai@ti.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28OMAP3: Add Overo boardDirk Behme
Add Overo board support. Signed-off-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28OMAP3: Add common power code, README, and BeagleBoardDirk Behme
Add BeagleBoard support, common power code and README. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-01-28Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk
2009-01-28Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2009-01-2885xx: Fix compile breakage with MPC8540EVALKumar Gala
Configuring for MPC8540EVAL board... mpc8540eval.c: In function 'checkboard': mpc8540eval.c:53: error: invalid operands to binary / make[1]: *** [mpc8540eval.o] Error 1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28usb_scan_devices: fix output with no devicesBryan Wu
We should check the return of usb_new_device() so that if no USB device is found, we print out the right message rather than always saying "new usb device found". Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28USB: Add high-speed (480Mb/s) to all USB related outputsStefan Roese
With this patch the USB related connection speed output ("usb tree" command and debug output) is now high-speed enabled. This patch also fixes a compilation warning when debugging is enabled. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28USB: Add dcache support to the EHCI driverStefan Roese
This patch adds routines to handle (flush/invalidate) the dcache for the QH and qTD structures and data buffers. This is needed on platforms using this EHCI support with dcache enabled (like the MIPS VCT board port). Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28USB: Add EHCI support for VCT EHCI controllerStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28USB: Add config option to call ehci_hcd_init() again after EHCI resetStefan Roese
This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET to call ehci_hcd_init() again after ehci_reset() is executed. This is needed for the upcoming VCT EHCI support which needs to re-init the hcd part again after the EHCI CMD_RESET is executed. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28USB: Fix speed detection on EHCI cntr with root hub transaction translatorsStefan Roese
This patch fixes an issue that the speed of USB devices was not detected correctly on some EHCI controllers. This will be used on the upcoming VCT EHCI support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platformThomas Abraham
Enabling USB MSC support for DM6446 (TI DaVinci) platform in the configuration file. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28usb : musb : Enabling DM6446 (TI DaVinci) USB module powerThomas Abraham
Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level controller hook up to USB core layer. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28usb : musb : Adding DM6446 (TI DaVinci) platform specific USB supportThomas Abraham
Adding DM6446 (TI DaVinci) platform specific USB functionality for USB Phy and VBUS initialization. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28usb : musb : Adding USB VBUS enable functionality for DM644x DVEVMThomas Abraham
Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci) platform. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28usb : musb : Adding host controller driver for Mentor USB controllerThomas Abraham
Adding Mentor USB core functionality and Mentor USB Host controller functionality for Mentor USB OTG controller (musbhdrc). Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28usb.h: use standard __LITTLE_ENDIAN from Linux headersMike Frysinger
Rather than forcing people to define a custom "LITTLEENDIAN", just use the __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is already setting up. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28USB ehci ixp4xx supportMichael Trimarchi
Add USB ehci ixp4xx host controller. Test on ixdp465 board. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28USB ehci remove infinite loop and use handshake functionMichael Trimarchi
USB ehci code cleanup. Use handshake instead of infinite while loop to check the STD_ASS status Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28Add initial support for USB ehci pciMichael Trimarchi
Add USB ehci pci support. This patch doesn't include any pci_ids and it is not tested on real hardware. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb driveBryan Wu
The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4 does not like to be reset, so check for it. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structureThomas Abraham
This patch populates the 'priv' field of the USB keyboard device_t structure. The 'priv' field is populated with the address of the 'struct usb_device' structure that represents the USB device. The 'priv' field can then be used in the 'usb_event_poll' function to determine the USB device that requires to be polled. An example of its usage in 'usb_event_poll' function is as below. device_t *dev; struct usb_device *usb_kbd_dev; <snip> dev = device_get_by_name("usbkbd"); usb_kbd_dev = (struct usb_device *)dev->priv; iface = &usb_kbd_dev->config.if_desc[0]; Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28USB change speedMichael Trimarchi
USB changes the speed according to the port status Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28EHCI fix code and ixp4xx test.Remy Böhmer
USB ehci configuration parameter: #define CONFIG_CMD_USB 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_IXP4XX 1 #define CONFIG_EHCI_IS_TDI 1 #define CONFIG_EHCI_DESC_BIG_ENDIAN 1 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #define CONFIG_LEGACY_USB_INIT_SEQ 1 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found => usb tree Device Tree: 1 Hub (1.5MBit/s, 0mA) | u-boot EHCI Host Controller | |+-2 Mass Storage (12MBit/s, 100mA) Sony Storage Media 0C07040930296 => Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
2009-01-28[PATCH] This patch add varius fix to the ehci.michael
- fix ehci_readl, ehci_writel - introduce new define in ehci.h - introduce the handshake function for waiting on a register - fix usb_ehci_fsl with the new HC_LENGTH macro Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
2009-01-28[PATCH] Fix EHCI usb. I start to test on amichael
IXP465 board and I find some errors in the code. This patch fix: - descriptor initizialization (config, interface and endpoint must be one next-to the other when the USB_DT_CONFIG message is send. - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN and the CONFIG_EHCI_MMIO_BIG_ENDIAN) - Introduce the linux version of the usb_config_descriptor and usb_interface descriptor. This descriptor does't contains u-boot extension. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
2009-01-28USB ehci freescale supportMichael Trimarchi
Add USB ehci freescale support Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
2009-01-28USB ehci core supportMichael Trimarchi
Add USB ehci core support Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
2009-01-28Prepare USB layer for ehciMichael Trimarchi
Prepare USB layer for ehci support Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> Signed-off-by: Remy Böhmer <linux@bohmer.net>
2009-01-28USB storage cleanup patchMichael Trimarchi
Cleanup usb storage Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28Blackfin: fixup misc warnings such as printf's and missing castsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: convert old boards to use COBJS-y Makefile styleMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: bf533-stamp: rewrite resource swap logicMike Frysinger
The old swap function tended to clobber unrelated pins and screw up masks. Rewrite the thing from scratch so it only uses the resources it needs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: bootldr: implement BF53x/BF56x LDR loaderMike Frysinger
The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of arbitrary memory locations, so implement a basic one in software. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: implement real write support for OTPMike Frysinger
Now that real documentation has been released for the OTP interface and the on-chip ROM wrt writing/timings, implement support for reading/writing as well as dumping/locking. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: update on-chip ROM APIMike Frysinger
This brings the API for the on-chip ROM in line with the toolchain and hardware documentation. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: allow serial console to be disabledMike Frysinger
Some devices have no UART device pulled out, so allow people to disable the driver completely in favor of other methods (like JTAG-console). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: support console-over-JTAGMike Frysinger
The Blackfin JTAG has the ability to pass data via a back-channel without halting the processor. Utilize that channel to emulate a console. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: handle new anomalies with resetMike Frysinger
Workaround fun new anomalies related to software reset of the processor. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28Blackfin: pass RETX to LinuxMike Frysinger
Make sure we save the value of RETX at power on and then pass it on to the kernel so that it can nicely debug a "double-fault-caused-a-reset" crash. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit (git 2.34.1) at 2024-12-29 12:10:11 +0000