summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-29i2c: mxs: Staticize the functions in the driverMarek Vasut
The local functions in the mxs i2c driver are not marked static, make it so. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2013-01-27MIPS: start.S: don't save flush_cache parameters in advanceGabor Juhos
Saving the parameters in advance unnecessarily complicates the code. The destination address is already saved in the 's2' register, and that register is not clobbered by the copy loop. The size of the copied data can be computed after the copy loop is done. Change the code to compute the size parameter right before calling flush_cache, and set the destination address parameter in the delay slot of the actuall call. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-27MIPS: start.S: simplify relocation offset calculationGabor Juhos
The current code uses four instructions and a temporary register to calculate the relocation offset and to adjust the gp register. The relocation offset can be calculated directly from the CONFIG_SYS_MONITOR_BASE constant and from the destination address. The resulting offset can be used to adjust the gp pointer. This approach makes the code a bit simpler because it needs two instructions only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-27MIPS: start.S: save reused arguments earlier in relocate_codeGabor Juhos
Save the reused parameters at the beginning of the 'relocate_code' function. This makes the function a bit more readable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-27MIPS: start.S: set sp register directlyGabor Juhos
The current code uses two instructions to load the stack pointer into the 'sp' register. This results in the following assembly code: 468: 3c088040 lui t0,0x8040 46c: 251d0000 addiu sp,t0,0 The first instuction loads the stack pointer into the 't0' register then the value of the 'sp' register is computed by adding zero to the value of the 't0' register. The same issue present on the 64-bit version as well: 56c: 3c0c8040 lui t0,0x8040 570: 659d0000 daddiu sp,t0,0 Change the code to load the stack pointer directly into the 'sp' register. The generated code is functionally equivalent to the previous version but it is simpler. 32-bit: 468: 3c1d8040 lui sp,0x8040 64-bit: 56c: 3c1d8040 lui sp,0x8040 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-27MIPS: start.S: fix boundary check in relocate_codeGabor Juhos
The loop code copies more data with one than necessary due to the 'ble' instuction. Use the 'blt' instruction instead to fix that. Due to the lack of suitable hardware the Xburst specific code is compile tested only. However the change is quite obvious. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-22MIPS: start{, 64}.S: fill branch delay slots with NOP instructionsGabor Juhos
The romReserved and romExcHandle handlers are accessed by a branch instruction however the delay slots of those instructions are not filled. Because the start.S uses the 'noreorder' directive, the assembler will not fill the delay slots either, and leads to the following assembly code: 0000056c <romReserved>: 56c: 1000ffff b 56c <romReserved> 00000570 <romExcHandle>: 570: 1000ffff b 570 <romExcHandle> In the resulting code, the second branch instruction is placed into the delay slot of the first branch instruction, which is not allowed on the MIPS architecture. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-22MIPS: convert IO port accessor functions to 'static inline'Gabor Juhos
The currently used 'extern inline' directive causes the following compiler warnings if CONFIG_SWAP_IO_SPACE is defined: <...>/include/asm/io.h:345:1: warning: '__fswab32' is static but used in inline function '__outlc_p' which is not static [enabled by default] <...>/include/asm/io.h:345:1: warning: '__fswab32' is static but used in inline function '__outl_p' which is not static [enabled by default] <...>/include/asm/io.h:345:1: warning: '__fswab32' is static but used in inline function '__outlc' which is not static [enabled by default] <...>/include/asm/io.h:345:1: warning: '__fswab32' is static but used in inline function '__outl' which is not static [enabled by default] <...>/include/asm/io.h:344:1: warning: '__fswab16' is static but used in inline function '__outwc_p' which is not static [enabled by default] <...>/include/asm/io.h:344:1: warning: '__fswab16' is static but used in inline function '__outw_p' which is not static [enabled by default] <...>/include/asm/io.h:344:1: warning: '__fswab16' is static but used in inline function '__outwc' which is not static [enabled by default] <...>/include/asm/io.h:344:1: warning: '__fswab16' is static but used in inline function '__outw' which is not static [enabled by default] <...>/include/asm/io.h:341:1: warning: '__fswab32' is static but used in inline function '__inlc_p' which is not static [enabled by default] <...>/include/asm/io.h:341:1: warning: '__fswab32' is static but used in inline function '__inl_p' which is not static [enabled by default] <...>/include/asm/io.h:341:1: warning: '__fswab32' is static but used in inline function '__inlc' which is not static [enabled by default] <...>/include/asm/io.h:341:1: warning: '__fswab32' is static but used in inline function '__inl' which is not static [enabled by default] <...>/include/asm/io.h:340:1: warning: '__fswab16' is static but used in inline function '__inwc_p' which is not static [enabled by default] <...>/include/asm/io.h:340:1: warning: '__fswab16' is static but used in inline function '__inw_p' which is not static [enabled by default] <...>/include/asm/io.h:340:1: warning: '__fswab16' is static but used in inline function '__inwc' which is not static [enabled by default] <...>/include/asm/io.h:340:1: warning: '__fswab16' is static but used in inline function '__inw' which is not static [enabled by default] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-22MIPS: use inline directive for __in*s functionsGabor Juhos
All other IO accessor functions are using the 'inline' directive. Use that also for the __in*s to make it consistent with the other variants. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-16Merge remote-tracking branch 'mpc83xx/next'Kim Phillips
2013-01-16README.mips: update known issues and TODOsDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-01-16README.qemu-mips: move README file from board to doc directoryDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-01-16MIPS: qemu-mips: update and fix example usage in READMEDaniel Schwierzeck
By now U-Boot supports Qemu MIPS for little and big endian as well as 32 bit and 64 bit. Update and fix the example usage in the README to reflect this. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-01-16MIPS: qemu-mips: add '-M mips' switch to the example usage commandGabor Juhos
Using the example command from the README file does not work as expected. qemu shows a text similar to the one below and it hangs. $ qemu-system-mips -L . -nographic Could not open option rom 'pxe-pcnet.rom': No such file or directory qemu-system-mips: pci_add_option_rom: failed to find romfile "vgabios-cirrus.bin" qemu: terminating on signal 15 from pid 19726 This happens because qemu emulates a Malta board by default if the machine type is not defined explicitely on the command line. For a working test, the '-M mips' switch is required: $ qemu-system-mips -M mips -L . -nographic Could not open option rom 'vgabios.bin': No such file or directory U-Boot 2013.01-rc2-00132-g1e8e648-dirty (Jan 08 2013 - 09:06:42) Board: Qemu -M mips CPU: 24Kf proc_id=0x19300 DRAM: 128 MiB ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB Flash: 0 Bytes *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: NE2000 Hit any key to stop autoboot: 0 qemu-mips # Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Vlad Lungu <vlad.lungu@windriver.com>
2013-01-16MIPS: qemu-mips: fix a typo in READMEGabor Juhos
The 'Limitations & comments' section refers to the '-m mips' switch which is not valid. The '-m' switch can be used for setting the virtual RAM size: $qemu-system-mips --help | grep '^-m ' -m megs set virtual RAM size to megs MB [default=128] $ The correct switch for specifying the machine type is '-M'. Fix the text to refer to that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Vlad Lungu <vlad.lungu@windriver.com>
2013-01-16MIPS: bootm.c: add support for 'prep' and 'go' subcommandsGabor Juhos
The bootm command supports subcommands since long time however those subcommands are not yet usable on MIPS. The patch is based on the ARM implementation, and it adds support for the 'prep' and 'go' subcommands only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-16MIPS: bootm.c: separate environment initializationGabor Juhos
Move the environment initialization code into a separate function. This make the code reusable for bootm subcommands. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-16MIPS: bootm.c: separate linux jump codeGabor Juhos
Move the actual jump code into a separate function. This make the code reusable for bootm subcommands. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-16MIPS: bootm.c: use debug macro to print debug messageGabor Juhos
The '## Transferring control ...' message is printed only if DEBUG is enabled. Get rid of the 'ifdef DEBUG' statement and use the debug macro instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
2013-01-15Prepare v2013.01Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-01-14pxa: Save lr register in relocate_code functionŁukasz Dałek
When u-boot is compiled for PXA25x processor, pxa/start.S is calling cpu_init_crit by BL instruction. BL is overwriting lr register so relocate_code is going into infinite loop. This patch preservs lr register in r12 before calling cpu_init_crit and after function returns restores it. Signed-off-by: Lukasz Dalek <luk0104@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2013-01-14Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2013-01-14Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini
2013-01-14twl4030: fix 'could could' in error messagesPeter Meerwald
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
2013-01-14watchdog.h: Move hw_watchdog_init prototype to end, guardTom Rini
In commit abbab70 we added a prototype for hw_watchdog_init, in a Freescale i.MX watchdog driver. We did not however guard it with an __ASSEMBLY__ check and broke some platforms. Move this to the end of the file with other prototypes and guard it. Signed-off-by: Tom Rini <trini@ti.com>
2013-01-14VIDEO: better document the correct use of CONFIG_FB_ADDRWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> cc: Anatolij Gustschin <agust@denx.de>
2013-01-14lcd: restore ability to display 8 bpp BMPs on 16 bpp LCDsNikita Kiryanov
Commit fb6a9aab7ae78c (LCD: display 32bpp decompressed bitmap image) broke the check that allowed U-Boot to display 8 bpp BMPs on a 16 bpp LCD screen, effectively turning this feature off. Restore this feature by changing the check back to the same meaning it originally had. To avoid future confusion, the check has also been rephrased to make its meaning clear. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2013-01-14Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-14Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-14video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selectedAjay Kumar
Previously, the call to draw_logo() was happening irrespective of whether we have selected logo or LCD console. With this patch we call draw_logo() only when CONFIG_CMD_BMP is selected. This would even fix the following compilation warning: exynos_fb.c: In function 'draw_logo': exynos_fb.c:74:8: warning: variable 'addr' set but not used [-Wunused-but-set-variable] exynos_fb.c:73:9: warning: variable 'y' set but not used [-Wunused-but-set-variable] exynos_fb.c:73:6: warning: variable 'x' set but not used [-Wunused-but-set-variable] Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-14video: exynos_dp: Remove unused variable disp_infoAjay Kumar
Remove unused variable disp_info to fix the following compilation warning: exynos_dp.c: In function 'exynos_init_dp': exynos_dp.c:860:23: warning: variable 'disp_info' set but not used [-Wunused-but-set-variable] Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-14I2C: S3C24X0: Resolve build error for VCMA9Rajeshwari Shinde
This patch resolves the following build errors for I2C driver in VCMA9: In file included from s3c24x0_i2c.c:40:0: s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning: 'i2c_busses' defined but not used [-Wunused-variable] Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-13mx51evk: Add DVI output supportFabio Estevam
Add DVI output support and make it the default video output. Currently the CLAA WVGA panel is supported, but this panel has to be purchased separately, so using the DVI output as the default would allow more people to try the splash screen feature on a mx51evk. If someone still wants to use the CLAA WVGA, just set the panel variable as: set panel claa Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-13mx6qsabresd: Fix booting the kernel from SDHC3Fabio Estevam
Since commit de7d02aeb (mx6qsabresd: add usdhc2 and usdhc4 support) SDHC3 device node is no longer 0, which breaks loading a uImage from SDHC3. Fix it by adapting the default environment to use CONFIG_SYS_MMC_ENV_DEV as the correct mmc node for loading the kernel from. While at it, go back to using SDHC3 as the default mmc, since we have Yocto images that generate an SD card containing U-boot,kernel and rootfs, so it is more convenient to keep using SDHC3 as it was originally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-13mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or notOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-13mx6qsabrelite: Add support to dynamically choose between fdt use or notOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx53loco: Add support to dynamically choose between fdt use or notOtavio Salvador
The CONFIG_SYS_CBSIZE has been change to 512 to avoid runtime errors as: ,---[ Runtime error ] | Hit any key to stop autoboot: 0 | MX53LOCO U-Boot > pri netboot | netboot=echo Booting from net ...; run netargs; if test ... | prefetch abort | pc : [<20747368>] lr : [<20747365>] | sp : af566e20 ip : 00000000 fp : 00000000 | r10: 00000002 r9 : af6dfc28 r8 : af566f58 | r7 : af6dfc10 r6 : 00000001 r5 : 00000002 r4 : 74206669 | r3 : 00000000 r2 : 00000060 r1 : 00000020 r0 : 0000018e | Flags: nZCv IRQs off FIQs off Mode SVC_32 | Resetting CPU ... | | resetting ... `--- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx28evk: Add support to dynamically choose between fdt use or notOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx28evk: We shouldn't hardcode a rootfs filesystem typeOtavio Salvador
For a generic environment, we shouldn't have a fixed rootfs filesystem so we drop it from env. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx6qsabrelite: Use tabs to environment settingOtavio Salvador
This rework the environment to use tabs for environment setting as done in other boards. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky
Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-01-12arm: at91sam9x5: add dataflash boot supportBo Shen
Add dataflash boot support on at91sam9x5ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-01-11m68k/lib: fix serial driver relocationangelo
Fix coldfire serial driver bindings no more relocated to ram after last changes to drivers/serial/serial.c (regression). Serial initialization in ram has to be called after that gd->reloc_off is calculated. Signed-off-by: Angelo Dureghello <sysamfw@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
2013-01-11Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-01-11Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-11EXYNOS5: Enable console multiplexing in u-bootAjay Kumar
We enable console multiplexing and use both serial and LCD for stdout/stderr. Initially, u-boot output console is observed via serial port. If you also have a DP panel connected onto your SMDK5250 board, you can switch to LCD console by typing "setenv stdout lcd". You can always switch back to serial using "setenv stdout serial". You can switch error console(stderr) as well, using similar commands. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11EXYNOS5: Make all display related code dependent on CONFIG_LCDAjay Kumar
u-boot compilation fails for smdk5250 when we deselect CONFIG_LCD from the main config file. Following error was observed: drivers/video/libvideo.o: In function `exynos_lcd_init': /home/ajay/u-boot-samsung/drivers/video/exynos_fb.c:68: undefined reference to `lcd_set_flush_dcache' This is because exynos video drivers have dependency on CONFIG_LCD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clkJaehoon Chung
Mobile storage is used the CLK_DIV_FSYS3 value. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11Exynos: clock: support get_mmc_clk for exynosJaehoon Chung
To get exactly clock value for mmc, support the get_mmc_clk() like set_mmc_clk(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMTJavier Martinez Canillas
IGEP board PC16550D (ns16550) UART doesn't set the Transmitter Empty (TEMT) Bit in SPL. This makes U-Boot to hang while waiting for TEMT. Add the CONFIG_SYS_NS16550_BROKEN_TEMT config option to avoid this issue. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
generated by cgit (git 2.34.1) at 2024-12-27 05:51:15 +0000