summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-24arm64: zynqmp: Remove fixme about memory size on zynqmp-p-a2197Michal Simek
System controller has 2GB of memory and fixme can be removed now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync si570 setup and clock namesMichal Simek
Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix m-a2197-01 DT based on latest schematicsMichal Simek
Remove some FIXMEs and align it with latest schematics. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Switch spi-flash to jedec,spi-nor on m-a2197Michal Simek
Mainline has done this switch and there is no reason not to switch it too. Mainline U-Boot patch which has done that switch: "dts: switch spi-flash to jedec, spi-nor compatible" (sha1: ffd4c7c2ecb745586239eb98d5dc0fe5e6ebe3bd) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on m-a2197-01Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on m-a2197-01Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix typo in zynqmp-p-a2197-00-revAMichal Simek
Trivial fix but not detected by checkpatch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Added new tps53679 compatible string for a2197-0x boardsNishant Mittal
Added tps53679 compatible string to tps53681. They are both compatible to each other and tps53679 has Linux driver already. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix i2c address of u70 on p-a2197-00 boardNishant Mittal
tps53681 is i2c address 0x60 not 0xc0. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on g-a2197-00Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on g-a2197-00Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use ethernet-phy as node name for ethernet physMichal Simek
Ethernet phys based on devicetree specification should be using ethernet-phy@ node name instead of pure phy@. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync names for SC with VersalMichal Simek
ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Add missing pl353-smc nodeMichal Simek
DT binding was reviewed in Linux by commit b0b41af12a1b ("dt-bindings: memory: Add pl353 smc controller devicetree binding information") that's why this fragment can be also added to U-Boot repository. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Move BOOTM_NETBSD to KconfigMichal Simek
The commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options") moved BOOTM_ options to Kconfig that's why align zynq defconfig with it. Disabling NETBSD was done by commit d6f48ea5ce18 ("ARM: zynq: Do not enable NETBSD support by default"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable GPIO command for VersalMichal Simek
Enable GPIO command for Xilinx Versal platform. Driver is updated that's why it can be used directly. Driver is enabled by default through Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24gpio: zynq: Add gpio driver support for PMC gpioShubhrajyoti Datta
This patch adds support for gpio driver for pmc gpio. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24gpio: zynq: Add gpio driver support for VersalAshok Reddy Soma
This patch adds support for gpio driver for versal platform Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24firmware: zynqmp: Clean up zynqmp_power_probeMichal Simek
Fix error debug messages to be more accurate and aligned with debug message style in the whole file. And do not initialize ret variable because it is initialized later on and it is just additional step. Fixes: 1327d1678bd2 ("firmware: zynqmp: Add zynqmp-power support") Reported-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-24firmware: zynqmp: Report error when xilinx_pm_request called from EL3Michal Simek
Function should report error when called in EL3 context. Also report it as error instead 0 (success). Reported-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-24arm64: zynqmp: Convert invoke_smc() to xilinx_pm_request()Michal Simek
Remove macros which use PM_SIP_SVC offset and convert invoke_smc() to xilinx_pm_request() which do calculation with PM_SIP_SVC already. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Rename versal_pm_request to xilinx_pm_requestMichal Simek
Use generic name instead of Versal specific because this should be also used on ZynqMP. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: xilinx: Move firmware functions from platform to driverMichal Simek
versal_pm_request() and invoke_smc() are almost the same. Only one difference is that versal_pm_request is adding PM_SIP_SVC offset to api_id. The patch is moving platform implementation to firmware driver code for synchronization. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-24arm64: versal: Clean pm_api_id usageMichal Simek
Copy enum values from platform code to firmware code. IDs are shared between ZynqMP and Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-23Merge tag 'u-boot-stm32-2019-10-23' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Disable CONFIG_NET flag for MCU STM32 - Fix ramdisk_addr_r for stm32f746-disco - Fix USB product id for stm32mp1
2019-10-23Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add LS1027A, LS1018A, LS1017A support - Few updates related to usb, ls1012a, lx2160a
2019-10-22board: stm32mp1: fixup the usb product id for USB download gadgetPatrick Delaunay
Select the correct USB product id used by the download gadget for ST stm32mp1 boards. The board stm32mp1 select the correct product id, as defined in http://www.linux-usb.org/usb.ids for the STMicroelectronics vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM): - dfu = 0xdf11 : STM Device in DFU mode it is the value used by ROM code and reused for stm32prog command - fasboot = 0x0afb : Android Fastboot device - others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM) Mass Storage Device it is used for UMS command / usb_dnl_ums This patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-22configs: stm32f746-disco: Fix ramdisk_addr_rPatrice Chotard
Set ramdisk_addr_r to 0xC0600000. Reported-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32h743-eval: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32h743-disco: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f469-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-evaluation: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-21dm: pinctrl: fix for introduce PINCONF_RECURSIVE optionPatrick Delaunay
Correct the name of the define used CONFIG_IS_ENABLED which is not aligned with Kconfig name: CONFIG_$(SPL_)PINCONF_RECURSIVE. The recursive calls is conditional only for UCLASS_PINCONFIG "pinconfig" driver. It is always needed to call pinctrl_post_bind for UCLASS_PINCTRL "pinctrl", the test CONFIG_IS_ENABLED(PINCONF_RECURSIVE) need to be removed for this driver. This correct a regression introduced because the same patch is applied twice times in u-boot-dm branch: - commit e878b53a79d1 ("dm: pinctrl: introduce PINCONF_RECURSIVE option") - commit c20851b3d850 ("dm: pinctrl: introduce PINCONF_RECURSIVE option") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-21pinctrl: Kconfig: remove duplicated nodesPatrick Delaunay
Remove the duplicated configs introduced when the same patch is applied twice times: - commit e878b53a79d1 ("dm: pinctrl: introduce PINCONF_RECURSIVE option") - commit c20851b3d850 ("dm: pinctrl: introduce PINCONF_RECURSIVE option") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-21armv7: ls102xa: Don't power down OCRAM1 during deep sleepBiwen Li
To allow OCRAM to be used as wakeup source in deep sleep, do not power it down. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: add errata ID A-008646 for workaroundBiwen Li
The patch adds an errata ID A-008646 for workaround to provide more information by errata ID. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: Update LX2160A/LX2120A/LX2080A SVR valueWasim Khan
LX2160A/LX2120A/LX2080A SVR value should be 0x873600/0x873620/0x873602 Previous values were valid only if CAN fuse is blown. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: ls1028a: disable multimedia for ls1027a, ls1017aYuantian Tang
ls1028a has 4 personalities: ls1028a, ls1027a, ls1017a and ls1018a. Both ls1027a and ls1017a personalities are lower functionality version which doesn't support the multimedia subsystems, like LCD, GPU. To disable multimedia feature on non-multimedia version, set the status property to disabled in dts nodes. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21board/ls1028a: Add call to sec_init()Udit Agarwal
Adds sec_init call to initialise the job ring parameters for secure boot operations. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21configs: ls1012afrwy: Add CONFIG_ENV_ADDRKuldeep Singh
This configuration enables picking the environment from flash before DDR init. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: Correct endianness of SCFG_SPARECR8 readBiwen Li
The patch corrects endianness of register SCFG_SPARECR8 read in_le32 -> in_be32 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: fsl-layerscape: Make USB masters snoopableRan Wang
Program register bit of SCFG_SNPCNFGCR_USBxRDSNP and SCFG_SNPCNFGCR_USBxWRSNP(x = 1, 2, 3) to drive USBx read/write snoop signal on LS1043A and LS1046A. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: Update SCFG_QSPI_CLKSEL valueKuldeep Singh
Update SCFG_QSPI_CLKSEL value : 0xC -> 0x5 which means ClusterPLL/16 Signed-off-by: Ashish Kumar <Ashish.kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21configs: ls1012ardb: Add CONFIG_ENV_ADDRKuldeep Singh
CONFIG_ENV_ADDR config option enables picking the environment from flash before DDR init. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: ls1028a: Add more personalities supportYuantian Tang
Add LS1027A, LS1018A and LS1017A personalities support to LS1028A SoC family. LS1028A is the prime personality of LS1028A SoC family. LS1027A is a lower funtionality version of QorIQ LS1028A which does not support the multimedia subsystems, such as LCD controller, GPU, and eDP PHY. The QorIQ LS1018A and LS1017A SoCs are single 64-bit Arm A72 core, low power versions of the QorIQ LS1028A and LS1027A SoCs respectively. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-18spl: mmc: make eMMC HW boot partition configuration optionalAnatolij Gustschin
Loading U-Boot on i.MX8QXP MEK board is broken since recent changes in spl_mmc: U-Boot SPL 2019.10-00162-gff5bd397e4 (Oct 18 2019 - 15:50:45 +0200) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46400 spl: mmc partition switch failed SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The newly added CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION option is selected automatically and overrides the EXT_CSC_PART_CONFIG configurations with default value, always selecting the eMMC boot partition 1. Boards which place U-Boot image in other partitions became not bootable. Fix this by making the eMMC HW boot partition selection optional. Fixes: 17241ea0543a (spl: mmc: Add option to set eMMC HW boot partition) Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-18Merge tag 'efi-2020-01-rc1-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-01-rc1 (2) Install the simple file protocol only if there is a file system on the partition. Enable CONFIG_CMD_NVEDIT_EFI on QEMU.
2019-10-18Merge tag 'u-boot-amlogic-20191018' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - document alternative libretech-cc installation methods, including upstream TF-A and opensource tools - add HDMI/CVBS display support for Amlogic G12A SoCs and SEI510 board - add support for Amlogic A311D based Khadas VIM3 - add support for Amlogic S905X3 based SEI610 board, targeting Android support like SEI510
2019-10-18Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Support sifive DM based gpio driver for FU540-SoC. - Align boot image header with Linux v5.3
generated by cgit (git 2.34.1) at 2024-12-26 04:17:32 +0000