summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-29configs: lx2160ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LX2160ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls2088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1088ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (8 x VSC8514, AQR105). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls2088ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (4 x AQR405 and 4 x CS4340). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: lx2160ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the EMDIO1 node and describe the 2 AR8035 RGMII PHYs and the 2 AQR107 PHYs. Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1088a: add external MDIO nodesIoana Ciornei
Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls2088a: add external MDIO nodesIoana Ciornei
Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: lx2160a: add external MDIO nodesIoana Ciornei
Add the External MDIO device nodes found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: ls2088ardb: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: ls1088ardb: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: fsl-mc: add support for CONFIG_DM_ETHIoana Ciornei
Make any adjustments necessary in order to support DPAA2 devices probed using CONFIG_DM_ETH. While at it, fixup some styling issues aroung the switch-case statement. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: ldpaa: add DTS based probing supportIoana Ciornei
When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible. In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver and reuse the _open()/_tx()/_stop() functions already inplemented. For the moment, the ldpaa_eth driver will support both configurations: with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence now has a matching 'struct udevice' made mutually exclusive based on the state of CONFIG_DM_ETH. Signed-off-by: Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: add Layerscape mEMAC MDIO driverIoana Ciornei
Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate Ethernet Media Access Controller) and the Fman 10G Ethernet MACs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28lx2160a : Update eMMC boot environment variableMeenakshi Aggarwal
Update mcinitcmd and bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls208xa: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1028a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1088a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Move GIC RD tables init to soc.cHou Zhiqiang
Move GIC redistributor tables initialization to CPU setup function. This patch introduces a GIC redistributor tables init function, and moves the function of reserving memory for GIC redistributor tables to soc.c and adds a argument for the memory size to reserve, BTW rename the function so that it is more readable. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Kconfig: Select RESV_RAM if GIC_V3_ITSHou Zhiqiang
The GIC redistributor tables initialization depends on RESV_RAM config, so select RESV_RAM if GIC_V3_ITS is enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28board: lx2160a: Align RD tables address to 64KBHou Zhiqiang
As the lower 16bit of the redistributor pending table is reserved for describing the memory attributes, we must give a 64KB aligned address to the GIC LPI initialization function. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28board: lx2160a: Add check in GIC RD tables initHou Zhiqiang
Program the GIC redistributor tables only when succeeded to reserve memory for them, otherwise kernel will lose the chance to program them using allocated memory. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Add RESV_RAM check in resv_ram addrHou Zhiqiang
The initialization of gd->arch.resv_ram pointer should depend on if the RESV_RAM config is enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28armv8: ls1046ardb: update the DIMM WRLVL_START valueYuantian Tang
The WRLVL_START values are optimized for old DDR MTA18ASF1G72AZ. Update DDR struct to set new WRLVL_START values so that the new DIMM MTA18ADF2G72AZ get optimized and the old DIMM still works. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1021a: Append CMA configuration to bootargsAlison Wang
The default reserved memory for CMA is high memory. If LPAE is enabled, highmem pages are non-remapped and can not be used with dma_alloc_coherent. Reserving low memory for CMA is needed for LS1021A. This patch appends the related CMA configuration to bootargs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28include/configs: ls1012afrwy: support dhcp bootBiwen Li
Add support of dhcp boot for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-27Merge tag 'video-for-v2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - simple panel 'nv140fhmn49' compatible - rockchip eDP and LVDS drivers build fix
2020-04-26video: simple_panel: add boe,nv140fhmn49 displayPeter Robinson
add "boe,nv140fhmn49" display to compatible node. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Anatolij Gustschin <agust@denx.de>
2020-04-26drivers: video: rockchip: fix building eDP and LVDS driversPeter Robinson
The rk_edp.c and rk_lvds.c files reference rk_setreg which is declared in hardware.h so include it so the drivers build. Adjust rk_lvds.c so includes are in alphabetical order while updating. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org>
2020-04-25Merge branch '2020-04-25-master-imports'Tom Rini
- Assorted minor fixes - Actions S700 SoC and Cubieboard7 support
2020-04-24rtc: ds1374: typo WatchdogHeinrich Schuchardt
%s/Watchdoc/Watchdog/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24spi: mpc8xxx_spi: fix missing dev_err definitionRasmus Villemoes
The build currently fails with drivers/spi/mpc8xxx_spi.c:64:3: warning: implicit declaration of function ‘dev_err’ [-Wimplicit-function-declaration] ... drivers/spi/built-in.o: In function `mpc8xxx_spi_set_speed': drivers/spi/mpc8xxx_spi.c:227: undefined reference to `dev_err' Fixes: 4856cc7a97 (mpc8xxx_spi: implement real ->set_speed) Fixes: 1a7b462dee (mpc8xxx_spi: put max_cs to use) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-24spl: fit: do not check argument of free()Heinrich Schuchardt
The free() function checks if its argument is NULL. It is superfluous to do the same check on the calling side. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24MAINTAINERS: add entry for cubieboard7 configAmit Singh Tomar
This commit adds entry for cubieboard7 config under Actions Semi OWL family. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24doc: boards: add Cubieboard7 documentationAmit Singh Tomar
This adds build and flash steps for Actions S700 based Cubieboard7 board. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: add Cubieboard7 board supportAmit Singh Tomar
The Cubieboard is a single board computer containing a Actions S700 SoC(with 4 ARMv8 Cortex-A53 cores). This patch adds respective defconfig alongwith .dts(copied from Linux v5.5-rc6 with hash "b3a987b0264d"). Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24actions: Move defconfig options to KconfigAmit Singh Tomar
This patch moves some of the config options from bubblegum_96_defconfig to respective Kconfig files. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: add support Actions Semi S700Amit Singh Tomar
This patch adds basic support for Actions Semi based S700 SoC, which is driven by common owl framework. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: dts: actions: s700: add u-boot specific dtsi fileAmit Singh Tomar
Devices like uart and clk are needed to be enabled before relocation. this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: add S700 SoC device treeAmit Singh Tomar
This patch adds .dtsi file(sync with Linux 5.5-rc6 with hash "b3a987b0264d") and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores. It also provisions dts file to be built based on selected platform(CONFIG_MACH_S900/S700). Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24clk: actions: Add common clock driverAmit Singh Tomar
This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registers are same). Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: dts: actions: s900: add u-boot specific dtsi fileAmit Singh Tomar
Devices like uart and clk are needed to be enabled before relocation. This patch adds u-boot.dtsi file that mark these device as dm-pre-reloc. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: dts: sync dts for Action Semi S900Amit Singh Tomar
Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b0264d". Also, it removes older clock binding defined for S900 along with undocumented compatible string "actions,s900-serial" from serial driver and adapts clock driver to cater to new bindings. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24serial: actions: add compatible stringAmit Singh Tomar
This patch adds "actions,owl-uart" string to the owl uart driver. It is also defined in Linux kernel. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: rename sysmap-s900 to sysmap-owlAmit Singh Tomar
Now that memory maps(for both S700 and S900 SoCs) can be managed using a common file, rename sysmap-s900 to sysmap-owl to reflect the same. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: actions: Add common framework for Actions Owl Semi SoCsAmit Singh Tomar
This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24coccinelle: adjust NULL check before free()Heinrich Schuchardt
The free() function checks if its argument is NULL. We should avoid checking for NULL before calling free like in     if (result->tds)         free(result->tds); The list of relevant functions differs between Linux and U-Boot, e.g. we use free(). Adjust the list of relevant functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24coccinelle: check for casting malloc outputHeinrich Schuchardt
Casting the (void *) output of memory allocation functions before assignment like in sata->cmd_hdr_tbl_offset = (void *)malloc(length + align); is useless. Adopt the Linux kernel script scripts/coccinelle/api/alloc/alloc_cast.cocci. Now 'make coccicheck' generates warnings like: ./drivers/ata/fsl_sata.c:143:29-33: WARNING: casting value returned by memory allocation function to (void *) is useless. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24kbuild: cherry-pick kbuild changes from LinuxMasahiro Yamada
b42841b7bb62 kbuild: Get rid of KBUILD_STR 2aedcd098a94 kbuild: suppress annoying "... is up to date." message 9c8fa9bc08f6 kbuild: fix if_change and friends to consider argument order ebf003f0cfb3 kbuild: Consolidate header generation from ASM offset information 2982c953570b kbuild: remove redundant $(wildcard ...) for cmd_files calculation 8a78756eb545 kbuild: create object directories simpler and faster 4d4b5c2e3b6e treewide: remove explicit rules for *offsets.s 01d509a48b46 kbuild: remove unimportant comments from ./Kbuild Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-24kbuild: add FORCE to dependency of $(obj)/dts/dt-platdata.oMasahiro Yamada
if_changed must have FORCE as a prerequisite. Add $(obj)/dts/dt-platdata.o to 'targets' so that the corresponding .cmd file is included. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit (git 2.34.1) at 2024-12-24 00:45:11 +0000