summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-03sunxi: imply USB_GADGETMaxime Ripard
A good number of our boards have USB_GADGET enabled. Imply it so that all the boards can benefit from it, and remove some boilerplate from our defconfigs. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sunxi: provide default USB gadget setupMaxime Ripard
All the Allwinner boards use the same manufacturer, VID and PID for the gadgets. Make them the defaults to remove some boilerplate from our defconfigs. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: usb_ether: Move settings to commonMaxime Ripard
The usb_ether gadget duplicates the USB settings for the manufacturer, product ID and vendor ID. Make sure we use the common option so that we can expect a single VID/PID couple for a single device. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: Make g_dnl USB settings commonMaxime Ripard
The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: usb_ether: Move the interfaces to KconfigMaxime Ripard
We need to select an interface for the usb_ether gadget, and they haven't been converted to Kconfig yet. Add a choice to make sure we have an option selected, and convert all the users. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: Convert USB_ETHER to KconfigMaxime Ripard
The USB Ethernet gadget option has not yet been moved to Kconfig, let's deal with that. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: Move USBNET_HOST_ADDR to KconfigMaxime Ripard
While the USB Ethernet device address is already defined in Kconfig, the host address isn't. Convert it. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: Document USBNET_DEVADDRMaxime Ripard
Add an help about the USBNET_DEVADDR Kconfig option to make it clearer what it's about. Acked-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03usb: gadget: Move USBNET_DEVADDR option out of g_dnlMaxime Ripard
The USBNET_DEVADDR has nothing to do with the USB download gadget, but rather with the USB Ethernet gadget. Move it out of the if statement. Acked-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sandbox: Expand list of IO accessorsMaxime Ripard
The setbits/clrbits/clrsetbits macros are used widely across the tree, let's provide implementation for them in the sandbox. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sandbox: Enable btrfs supportTom Rini
For better test coverage, enable btrfs. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-03fs/btrfs: Fix warning in btrfs_check_super()Tom Rini
We specifically say that the last arg is u32, so use %lu. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-02sandbox: Use asm-generic/io.hPaul Burton
Convert the sandbox architecture to make use of the new asm-generic/io.h to provide address mapping functions. As sandbox actually performs non-identity mapping between physical & virtual addresses we can't simply make use of the generic mapping functions, but are able to implement phys_to_virt() & make use of it from map_physmem(). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2017-10-02powerpc: Use asm-generic/io.hPaul Burton
Convert the powerpc architecture to make use of the new asm-generic/io.h to provide address mapping functions. As powerpc can actually perform non-identity mapping between physical & virtual addresses we can't simply make use of the generic phys_to_virt() & virt_to_phys() functions. However since map_physmem() already effectively implemented the same thing as virt_to_phys() we can simply implement virt_to_phys() instead of map_physmem() & use the generic map_physmem(). We also drop the no-op unmap_physmem(). This has only been build-tested, feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Wolfgang Denk <wd@denx.de>
2017-10-02nios2: Use asm-generic/io.hPaul Burton
Convert the nios2 architecture to make use of the new asm-generic/io.h to provide address mapping functions. As nios2 actually performs non-identity mapping between physical & virtual addresses we can't simply make use of the generic functions, with the exception of being able to drop our no-op unmap_physmem() and definitions of unused map flags. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Thomas Chou <thomas@wytron.com.tw>
2017-10-02mips: Use asm-generic/io.hPaul Burton
Convert the mips architecture to make use of the new asm-generic/io.h to provide address mapping functions. As mips actually performs non-identity mapping between physical & virtual addresses we can't simply make use of the generic functions, with the exception of being able to drop our no-op unmap_physmem() and definitions of unused map flags. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-10-02xtensa: Use asm-generic/io.hPaul Burton
Convert the xtensa architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for xtensa this is primarily a matter of moving code. This has only been build-tested, feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2017-10-02x86: Use asm-generic/io.hPaul Burton
Convert the x86 architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for x86 this is primarily a matter of moving code. This has only been build-tested, feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-02sh: Use asm-generic/io.hPaul Burton
Convert the sh architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for sh this is primarily a matter of moving code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-02nds32: Use asm-generic/io.hPaul Burton
Convert the nds32 architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for nds32 this is primarily a matter of removing code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Macpaul Lin <macpaul@andestech.com>
2017-10-02microblaze: Use asm-generic/io.hPaul Burton
Convert the microblaze architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for microblaze this is primarily a matter of removing code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Michal Simek <monstr@monstr.eu>
2017-10-02m68k: Use asm-generic/io.hPaul Burton
Convert the m68k architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for m68k this is primarily a matter of emoving code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Huan Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it> Acked-by: Angelo Dureghello <angelo@sysam.it> Tested-by: Angelo Dureghello <angelo@sysam.it>
2017-10-02arm: Use asm-generic/io.hPaul Burton
Convert the arm architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for arm this is primarily a matter of removing code. This has only been build-tested, feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-02arc: Use asm-generic/io.hPaul Burton
Convert the arc architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for arc this is primarily a matter of removing code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-10-02Provide a generic io.h & address mapping functionsPaul Burton
Most architectures currently supported by U-Boot use trivial implementations of map_to_physmem & virt_to_phys which simply cast a physical address to a pointer for use a virtual address & vice-versa. This results in a lot of duplicate implementations of these mapping functions. The set of functions provided by different architectures also differs, with some having implementations of phys_to_virt & others not. A later patch will make use of phys_to_virt in architecture-neutral code, and so requires that it be provided for all architectures. This patch introduces an asm-generic/io.h which provides generic implementations of address mapping functions, allowing the duplication of them between architectures to be removed. Once architectures are converted to make use of this generic header it will also ensure that all of phys_to_virt, virt_to_phys, map_physmem & unmap_physmem are provided. The 2 families of functions differ in that map_physmem may create dynamic mappings whilst phys_to_virt may not & therefore is more limited in scope but doesn't require information such as a length & flags. This patch doesn't convert any architectures to make use of this generic header - later patches in the series will do so. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Angelo Dureghello <angelo@sysam.it> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Angelo Dureghello <angelo@sysam.it> Tested-by: Angelo Dureghello <angelo@sysam.it> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-10-02mvebu: turris_omnia: Add CONFIG_CMD_BTRFS to defconfigMarek Behún
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-02cmd: Add the 'btrsubvol' command to list BTRFS subvolumesMarek Behún
Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 cmd/btrfs.c
2017-10-02fs: btrfs: Add U-Boot fs handlers.Marek Behún
Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 fs/btrfs/Kconfig create mode 100644 fs/btrfs/Makefile create mode 100644 fs/btrfs/btrfs.c create mode 100644 include/btrfs.h
2017-10-02fs: btrfs: Add single-device read-only BTRFS implementationMarek Behún
This adds the proper implementation for the BTRFS filesystem. The implementation currently supports only read-only mode and the filesystem can be only on a single device. Checksums of data chunks is unimplemented. Compression is implemented (ZLIB + LZO). Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 fs/btrfs/btrfs.h create mode 100644 fs/btrfs/chunk-map.c create mode 100644 fs/btrfs/compression.c create mode 100644 fs/btrfs/ctree.c create mode 100644 fs/btrfs/dev.c create mode 100644 fs/btrfs/dir-item.c create mode 100644 fs/btrfs/extent-io.c create mode 100644 fs/btrfs/hash.c create mode 100644 fs/btrfs/inode.c create mode 100644 fs/btrfs/root.c create mode 100644 fs/btrfs/subvolume.c create mode 100644 fs/btrfs/super.c
2017-10-02fs: btrfs: Add disk-to-cpu and cpu-to-disk conversion functionsMarek Behún
BTRFS on disk structures are stored in Little Endian. Add functions to convert this structures to cpu and to disk format. On Little Endian hosts, these functions do nothing. On Big Endian the CALL_MACRO_FROM_EACH from variadic-macro.h is used to define all the members for each structure on which cpu_to_le* or le*_to_cpu is to be called. Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 fs/btrfs/conv-funcs.h
2017-10-02fs: btrfs: Add btrfs_tree.h and ctree.h from Linux (and modified)Marek Behún
Add btrfs_tree.h and ctree.h from Linux which contains constants and structures for the BTRFS filesystem. Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 fs/btrfs/btrfs_tree.h create mode 100644 fs/btrfs/ctree.h
2017-10-02include: Add a variadic macro to call a callback for all argumentsMarek Behún
Add a header variadic-macro.h which defines the CALL_MACRO_FOR_EACH marco. This macro can be used as follows: #define TEST(x) CALL_MACRO_FOR_EACH(TEST, a, b, c, d) This will expand to TEST(a) TEST(b) TEST(c) TEST(d) The nice thing is that CALL_MACRO_FOR_EACH is a variadic macro, thus the number of arguments can vary (although it has an upper limit - in this implementation 32 arguments). Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 include/u-boot/variadic-macro.h
2017-10-02fs: Create a common fs_devread for ext4/reiserfs/zfsMarek Behún
The ext4, reiserfs and zfs filesystems all have their own implementation of the same function, *_devread. Generalize this function into fs_devread and put the code into fs/fs_internal.c. Signed-off-by: Marek Behun <marek.behun@nic.cz> [trini: Move fs/fs_internal.o hunk to the end of fs/Makefile as all cases need it] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-02lib: Add CRC32-CMarek Behún
This is needed for BTRFS. Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 lib/crc32c.c
2017-10-02Prepare v2017.11-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-02scripts: dtc: Add .gitignoreBin Meng
Ignore these generated files during the build of dtc. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01Merge git://git.denx.de/u-boot-usbTom Rini
2017-10-01Merge git://git.denx.de/u-boot-rockchipTom Rini
2017-10-01usb: dwc3: add UniPhier specific glue layerMasahiro Yamada
Add UniPhier platform specific glue layer to support USB3 Host mode on Synopsys DWC3 IP. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-10-01usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()Bin Meng
The stored 'blk' value is overwritten to 'size / 512' before it can be used in usb_stor_set_max_xfer_blk(). This is not what we want. In fact, when 'size' exceeds the upper limit (USHRT_MAX * 512), we should simply assign 'size' to the upper limit. Reported-by: Coverity (CID: 167250) Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: xhci: Set 'Average TRB Length' to 8 for control endpointsBin Meng
Update the codes to conform with xHCI spec chapter 6.2.3. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: xhci: Set 'Error Count' to 0 for isoch endpointsBin Meng
Per xHCI spec, 'Error Count' should be set to 0 for isoch endpoints. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: xhci: Program max burst size for endpointBin Meng
The 'Max Burst Size' indicates to the xHC the maximum number of consecutive USB transactions that should be executed per scheduling opportunity. This is a “zero-based” value, where 0 to 15 represents burst sizes of 1 to 16, but at present this is always set to zero. Let's program the required value according to real needs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: xhci: Honor endpoint's intervalBin Meng
USB endpoint reports the period between consecutive requests to send or receive data as bInverval in its endpoint descriptor. So far this is ignored by xHCI driver and the 'Interval' field in xHC's endpoint context is always programmed to zero which means 1ms for low speed or full speed , or 125us for high speed or super speed. We should honor the interval by getting it from endpoint descriptor. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: hub: Clear BH reset status change for a 3.0 hubBin Meng
USB 3.0 hubs report bit[5] in the port status change response as BH reset. The hub shall set the C_BH_PORT_RESET field for this port. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: hub: Clear port reset before usb_hub_port_connect_change()Bin Meng
During usb_hub_port_connect_change(), a port reset set feature request is issued to the port, and later a port reset clear feature is done to the same port before the function returns. However at the end of usb_scan_port(), we attempt to clear port reset again on a cached port status change variable, which should not be done. Adjust the call to clear port reset to right before the call to usb_hub_port_connect_change(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: xhci: Fix max packet size for full speed device endpoint 0Bin Meng
In xhci_check_maxpacket(), the control endpoint 0 max packet size is wrongly taken from the interface's endpoint descriptor. However the default endpoint 0 does not come with an endpoint descriptor hence is not included in the interface structure. Change to use epmaxpacketin[0] instead. The other bug in this routine is that when setting max packet size to the xHC endpoint 0 context, it does not clear its previous value at all before programming a new one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: Read device descriptor after device is addressed for xHCIBin Meng
For xHCI it is not possible to read a device descriptor before it has been assigned an address. That's why usb_setup_descriptor() was called with 'do_read' being false. But we really need try to read the device descriptor before starting any real communication with the default control endpoint. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: Only get 64 bytes device descriptor for full speed devicesBin Meng
Full speed device endpoint 0 can have 8/16/32/64 bMaxPacketSize0. Other speed devices report fixed value per USB spec. So it only makes sense if we send a get device descriptor with 64 bytes to full speed devices. While we are here, update the comment block to be within 80 cols. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-01usb: xhci: Add interrupt transfer supportBin Meng
xHCI uses normal TRBs for both bulk and interrupt. This adds the missing interrupt transfer support to xHCI so that devices like USB keyboard that uses interrupt transfer can work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-28 13:19:25 +0000