summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-09clk: sunxi: Implement EMAC, GMAC clocks, resetsJagan Teki
- Implement EMAC, GMAC clocks via ccu_clk_gate for all supported Allwinner SoCs. - Implement EMAC, GMAC resets via ccu_reset for all supported Allwinner SoCs. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-09clk: sunxi: Implement A10 EMAC clocksJagan Teki
Implement EMAC clocks via ccu_clk_gate for Allwinner A10 SoC. Which would eventually used in sunxi_emac.c driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-08power: axp818: Fix typo in axp_set_dldoOndrej Jirman
Fix typo in axp_set_dldo() so that it correctly uses AXP818_DLDO1_CTRL register to configure the voltage instead of setting AXP818_ELDO1_CTRL register which is obviously incorrect. Signed-off-by: Ondřej Jirman <megous@megous.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-03-06Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- dw spi include file fix - Allwinner A31 spi, been in ML in many releases.
2019-03-05Merge tag 'efi-2019-04-rc4' of https://github.com/xypron2/u-bootTom Rini
Pull request for the UEFI subsystem for v2019.04-rc4 This pull request contains only bug fixes. The most notable bug fixed was writing to random memory addresses when trying to add a HII package of a yet unsupported package type.
2019-03-04Prepare v2019.04-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-04Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Assorted PFC fixes
2019-03-04Merge tag 'u-boot-atmel-2019.04-a' of git://git.denx.de/u-boot-atmelTom Rini
First set of u-boot-atmel fixes for 2019.04 cycle
2019-03-04Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
- Enable DHCP as boot-source in distro boot for NXP layerscape platforms - fix register layout for SEC on Layerscape architectures - fixes related to DPAA2 ethernet
2019-03-04spi: Rename sun4i_spi.c into spi-sunxi.cJagan Teki
Now the same SPI controller driver is reusable in all Allwinner SoC variants, so rename the existing sun4i_spi.c into spi-sunxi.c which eventually look like a common sunxi driver. Also update the function, variable, structure names in driver from sun4i into sunxi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-04spi: sun4i: Driver cleanupJagan Teki
- drop unused macros. - use base instead of base_addr, for better code readability - move .probe and .ofdata_to_platdata functions in required places to add platdata support in future. - use sentinel sun4i_spi_ids. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-04spi: sun4: Add A31 spi controller supportJagan Teki
The usual SPI transmission protocol in Allwinner A10 and A31 controllers share similar context with minimal changes in register offsets along with few additional register bits on A31. So, add A31 spi controller support in existing sun4i_spi with A31 specific register offsets and bits. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-04spi: sun4i: Add CLK supportJagan Teki
Add CLK support to enable AHB and MOD SPI clocks on sun4i_spi driver. Clock disablement could be done while releasing the bus transfer, but the existing code doesn't disable the clocks it only taken care of clock enablement globally in probe. So to make a proper clock handling, the clocks should enable it in claim and disable it in release. This patch would also do that change, by enable and disable clock in proper order. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-04spi: sun4i: Support fifo_depth via drvdataJagan Teki
Support fifo_depth via drvdata instead of macro definition, this would eventually reduce another macro definition for new SPI controller fifo depth support addition. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-04spi: sun4i: Access registers and bits via enum offsetsJagan Teki
Allwinner support two different SPI controllers one for A10 and another for A31 with minimal changes in register offsets and respective register bits, but the logic for accessing the SPI master via SPI slave remains nearly similar. Add enum offsets for register set and register bits, so-that it can access both classes of SPI controllers. Assign same control register for global, transfer and fifo control registers to make the same code compatible with A31 SPI controller. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Stefan Mavrodiev <stefan@olimex.com> # A20-SOM204
2019-03-04spi: sun4i: Simplify reg writes using set/clrbits_le32Jagan Teki
Update the existing register writes using setbits_le32 and clrbits_le32 in required places. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-04clk: sunxi: Implement SPI clocks, resetsJagan Teki
- Implement SPI AHB, MOD clocks via ccu_clk_gate for all supported Allwinner SoCs - Implement SPI resets via ccu_reset for all supported Allwinner SoCs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-04spi: sun4i: Poll for rxfifo to be filled upJagan Teki
To drain rx fifo the fifo need to poll for how much data has been filled up in rx fifo. To achieve this, the current code is using wait_for_bit logic on control register with exchange burst mode mask, which is not a proper way of waiting for fifo filled up. So, add code for polling rxfifo to be filled up using fifo status register. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-04spi: designware: Change include orderHoratiu.Vultur@microchip.com
With current order of include files, the file designware_spi.c can't see that the struct global_data has the member board_type when CONFIG_BOARD_TYPES is defined. By not seeing this then all the members are shifted in the struct global_data. So when the driver is trying to read from device tree blob, it would pass the wrong address to the function 'fdtdev_get_int'. This will make to use the default frequency 500000. The fix consists of changing the order of include files in designware_spi.c to include first common.h file. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-03-04configs: at91: remove SPL_GENERATE_ATMEL_PMECC_HEADER from non-nand configsEugen Hristev
SPL_GENERATE_ATMEL_PMECC_HEADER will generate a header for the SPL for NAND information. The initial stage 1 bootloader will use this header in case the NAND flash doesn't support commands to retrieve sector size, etc. However this header is bad for different boot media, like MMC or SPI. In case SD_BOOT or SPI_BOOT is used, remove the config for this. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-03-04configs: sama5d27_som1_ek: Activate misc init for uSD variantAlexander Dahl
This was already set for 'sama5d27_som1_ek_mmc_defconfig' (first SD card, full size). Without this option set, the MAC address is not read from the I²C EEPROM at boot, and remains unset: U-Boot 2019.01 (Jan 01 2019 - 00:00:00 +0000) CPU: SAMA5D27 1G bits DDR2 SDRAM Crystal frequency: 24 MHz CPU clock : 492 MHz Master clock : 164 MHz DRAM: 128 MiB MMC: sdio-host@a0000000: 0, sdio-host@b0000000: 1 Loading Environment from FAT... OK In: serial Out: serial Err: serial Net: Error: ethernet@f8008000 address not set. eth-1: ethernet@f8008000 Hit any key to stop autoboot: 0 Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-03-04pinctrl: renesas: r8a77990: Reivse USB ID pin nameHiroyuki Yokoyama
Since the datasheet Rev.1.00 has an error about the USB ID pin name, this patch revises it. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit3 when using TX0Hiroyuki Yokoyama
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.50, the MOD_SEL0 bit3 is set to 0 when TX0_A pin function is selected, and the MOD_SEL0 bit3 is set to 1 when TX0_B pin function is selected. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_NHiroyuki Yokoyama
According to the R-Car Gen3 Hardware Manual Rev.1.50, the MOD_SEL0 bit16 is set to 0 when NFALE_A and NFRB_N_A pin functions are selected. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit2 when using RX2,TX2 and SCK2Hiroyuki Yokoyama
According to the R-Car Gen3 Hardware Manual Rev 1.50, the MOD_SEL0 bit2 is set when RX2_{A,B}, TX2_{A,B} and SCK2_A pin functions are selected. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: r8a77990: Fix rename RTSx_N_TANS_x to RTSx_N_xHiroyuki Yokoyama
This patch fixes the allocation name "RTSx_N_TANS_x" of IPSR / MOD_SEL0/1 of r8a77990 to "RTSx_N_x". This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: Fix r8a779{6,65} rename sel_ndfc to sel_ndfHiroyuki Yokoyama
This patch fixes the allocation name "sel_ndfc" of MOD_SEL2[22] of r8a7796 / r8a77965 to "sel_ndf". This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: Remove r8a779{5,6,65} CC5_OSCOUT of IP17Hiroyuki Yokoyama
This patch removes CC5_OSCOUT assignment of IP17[3:0] of r8a7795 / r8a7796 / r8a77965. This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: Fix r8a779{5,6,65} rename sel_adg_ to sel_adgHiroyuki Yokoyama
This patch fixes to the correct names, and "_" is not include after "adg" for r8a7795/r8a7796/r8a77965. This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-04pinctrl: renesas: Fix r8a779{5,6,65} assign to GP7_03/02 of GPSR7Hiroyuki Yokoyama
This patch is change the bit assignment of "HDMI1_CEC" to "GP7_03", and "HDMI0_CEC" to "GP7_02". This information was confirmed in the R-Car Gen3 Hardware Manual Rev.1.50. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-03board: Enable DHCP distro boot for LS1012a, LS1021aYunfeng Ding
Enable DHCP distro boot for Layerscape LS1012A and LS1021A. Signed-off-by: Yunfeng Ding <yunfeng.ding@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03armv8: fsl-layerscape: avoid DT fixup warningLaurentiu Tudor
sec_firmware reserves JR3 for it's own usage and deletes the JR3 node from the device tree. This causes this warning to be issued when doing the device tree fixup: WARNING could not find node fsl,sec-v4.0-job-ring: FDT_ERR_NOTFOUND. Fix it by excluding the device tree fixup for the JR reserved by sec_firmware. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03armv8: fsl-layerscape: fix SEC QI ICID setupLaurentiu Tudor
The SEC QI ICID setup in the QIIC_LS register is actually an offset that is being added to the ICID coming from the qman portal. Setting it with a non-zero value breaks SMMU setup as the resulting ICID is not known. On top of that, the SEC QI ICID must match the qman portal ICIDs in order to share the isolation context. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03fsl_sec: fix register layout on Layerscape architecturesLaurentiu Tudor
On Layerscape architectures the SEC memory map is 1MB and the register blocks contained in it are 64KB aligned, not 4KB as the ccsr_sec structure currently assumes. Fix the layout of the structure for these architectures. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1046qds: Enable PPA for secure bootPrabhakar Kushwaha
Re-organize defconfig and enabled PPA for secure boot Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03configs: fsl: move DDR specific defines to KconfigRajesh Bhagat
Moves below DDR specific defines to Kconfig: CONFIG_FSL_DDR_BIST CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE CONFIG_FSL_DDR_INTERACTIVE CONFIG_FSL_DDR_SYNC_REFRESH Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1043a: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1043a: enable dhcp bootMian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box on these platforms. Enable it as a boot source. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1043a: enable EFI_LOADER_BOUNCE_BUFFERMian Yousaf Kaukab
EFI applications need bounce buffers to work properly on these platforms. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1046a: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1046a: enable dhcp bootMian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box on these platforms. Enable it as a boot source. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1046a: enable EFI_LOADER_BOUNCE_BUFFERMian Yousaf Kaukab
EFI applications need bounce buffers to work properly on these platforms. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls2080ardb: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03Revert "ls2080ardb: remove dhcp function from env as boot source"Mian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box for ls2088a platforms. Moreover, no solid reason is given for disabling it. Revert the patch to re-enable it. This reverts commit aea5cd75e63c20de4c00ce24a93eeee8542f923e. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1088ardb: use default scan_dev_for_bootMian Yousaf Kaukab
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03Revert "ls1088a: remove dhcp function from u-boot env as boot source"Mian Yousaf Kaukab
dhcp boot is a useful feature and works out-of-the-box for ls1088a platforms. Moreover, no solid reason is given for disabling it. Revert the patch to re-enable it. This reverts commit 863e42e8b1f9e97d87919e20e34a7b98089f7522. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1088a: fix fsl-mc search pathMian Yousaf Kaukab
Path for fsl-mc node in kernel device-tree is /soc/fsl-mc whereas in u-boot it is /fsl-mc. Fix the incorrect search path to fix following error: fdt_fixup_board_enet: ERROR: fsl-mc node not found in device tree (error -1) Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1088a: fix dppa exit when using efi bootMian Yousaf Kaukab
Same issue for ls2080a was fixed by following patch: b7b8410a8f ls2080: Exit dpaa only right before exiting U-Boot Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2019-03-02efi_loader: HII protocols: debug messagesHeinrich Schuchardt
When package types are not supported by our implementation of the HII database protocol supported error messages are displayed. Essentially the output is only needed for debugging. By using EFI_PRINT() the messages are only written for in debug mode and with correct indentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2025-01-06 06:07:15 +0000