summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-27kbuild: use relative path more to include MakefileMasahiro Yamada
Prior to this commit, it was impossible to use relative path to include Makefiles from the top level Makefile because the option "--include-dir=$(srctree)" becomes effective when Make enters into sub Makefiles. To use relative path in any places, this commit moves the option above the "sub-make" target. This was imported from Linux (commit a436bb7b8063) and adjusted for U-Boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-07-27kbuild: do not add $((generic-)offsets-file) to targetsMasahiro Yamada
$(always) is added to targets by scripts/Makefile.build. Moreover, filechk does not need .*.cmd files. Adding these two files to targets is redundant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-27kbuild: sync with Linux 4.1Masahiro Yamada
Update some build scripts to match Linux 4.1. Commit-based syncing was done so as not to break U-Boot specific changes. The previous big sync was from Linux 3.18-rc1 by commit 176d09827725 (kbuild: sync misc scripts with Linux 3.18-rc1). The commits imported from Linux (some with adjustments) are: [1] commit 9fb5e5372208973984a23ee6f5f025c05d364633 Author: Robert Richter <rrichter@cavium.com> dts, kbuild: Factor out dtbs install rules to Makefile.dtbinst [2] commit 371fdc77af44f4cb32475fd499e1d912ccc30890 Author: Masahiro Yamada <yamada.m@jp.panasonic.com> kbuild: collect shorthands into scripts/Kbuild.include [3] commit a29b82326ed4eb5567b03c85b52c6891578d5a03 Author: Michal Marek <mmarek@suse.cz> kbuild: Remove duplicate $(cmd) definition in Makefile.clean [4] commit 1846dfbde3e8a53f3673dcb1c1b79fd9b3f8d40d Author: Masahiro Yamada <yamada.m@jp.panasonic.com> kbuild: remove redundant -rR flag of hdr-inst [5] commit 34948e0bbf98640fc1821751b01d2f0cd17d84d5 Author: Michal Marek <mmarek@suse.cz> kbuild: Drop support for clean-rule [6] commit a16c5f99a28c9945165c46da27fff8e6f26f8736 Author: Michal Marek <mmarek@suse.cz> kbuild: Fix removal of the debian/ directory [7] commit d0d38cd9e853db11e0242b3df4c9c3c4a663fbb4 Author: Masahiro Yamada <yamada.m@jp.panasonic.com> kbuild: use mixed-targets when two or more config targets are given [8] commit dd33c03b18b3f2db791eb6a17c37d2de66e4de18 Author: Masahiro Yamada <yamada.m@jp.panasonic.com> kbuild: fix cc-ifversion macro [9] commit 665d92e38f65d70796aad2b8e49e42e80815d4a4 Author: Masahiro Yamada <yamada.m@jp.panasonic.com> kbuild: do not add $(call ...) to invoke cc-version or cc-fullversion [10] commit 6dcb4e5edf39e3b65a75ca76f087b2fdbee8a808 Author: Masahiro Yamada <yamada.m@jp.panasonic.com> kbuild: allow cc-ifversion to have the argument for false condition [11] commit c0a80c0c27e5e65b180a25e6c4c2f7ef9e386cd3 Author: Heiko Carstens <heiko.carstens@de.ibm.com> ftrace: allow architectures to specify ftrace compile options [12] commit 0b24becc810dc3be6e3f94103a866f214c282394 Author: Andrey Ryabinin <a.ryabinin@samsung.com> kasan: add kernel address sanitizer infrastructure [13] commit 4218affdf57f938c04e3a916a9685ee27079f377 Author: Masahiro Yamada <yamada.m@jp.panasonic.com> kbuild: remove warning about "make depend" [14] commit 77479b38e2f58890eb221a0418357502a5b41cd6 Author: Nathan Rossi <nathan.rossi@xilinx.com> kbuild: Create directory for target DTB Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-27kconfig: sync with Linux 4.1Masahiro Yamada
Update the files under scripts/kconfig/ to match Linux 4.1. Some Kconfig sources have diverged from those in the kernel, so commit-base syncing was done not to lose U-Boot specific updates. The commits cherry-picked from Linux are: [1] commit be8af2d54a66911693eddc556e4f7a866670082b Author: Bjørn Forsman <bjorn.forsman@gmail.com> kconfig/lxdialog: get ncurses CFLAGS with pkg-config [2] commit 3943f42c11896ce82ad3da132c8a5630313bdd0e Author: Andrey Utkin <andrey.krieger.utkin@gmail.com> Replace mentions of "list_struct" to "list_head" [3] commit e4e458b45c5861808674eebfea94cee2258bb2ea Author: Arjun Sreedharan <arjun024@gmail.com> calloc/xcalloc: Fix argument order [4] commit 09950bc256e3628d275f90e016e6f5a039fbdcab Author: Olof Johansson <olof@lixom.net> merge_config.sh: Display usage if given too few arguments [5] commit b6a2ab2cd4739a9573ed41677e53171987b8da34 Author: Colin Ian King <colin.king@canonical.com> kconfig: use va_end to match corresponding va_start [6] commit 70529b1a1784503169416df19ce3d68746401340 Author: Michal Marek <mmarek@suse.cz> kconfig: Get rid of the P() macro in headers [7] commit 463157444e377bf9b279101b1f16a94c4648c03a Author: Michal Marek <mmarek@suse.cz> kconfig: Remove dead code [8] commit ad8d40cda3ad22ad9e8863d55a5c88f85c0173f0 Author: Michal Marek <mmarek@suse.cz> kconfig: Remove unnecessary prototypes from headers [9] commit de4619937229378e81f95e99c9866acc8e207d34 Author: Masahiro Yamada <yamada.masahiro@socionext.com> kbuild: mergeconfig: fix "jobserver unavailable" warning [10] commit b9fe99c5b994c6ddc57780993966b18899526c0b Author: Masahiro Yamada <yamada.masahiro@socionext.com> kbuild: mergeconfig: move an error check to merge_config.sh [11] commit 371cfd4ff0611d8bc5d18bbb9cc6a2bc3d56cd3d Author: Masahiro Yamada <yamada.masahiro@socionext.com> kbuild: mergeconfig: remove redundant $(objtree) [12] commit 3a975b8cfcbe026b535f83bde9a3c009bae214f9 Author: Masahiro Yamada <yamada.masahiro@socionext.com> merge_config.sh: improve indentation [13] commit bc8f8f5fc47cd02c2c5f3580dac2fe6695af1edd Author: Masahiro Yamada <yamada.masahiro@socionext.com> merge_config.sh: rename MAKE to RUNMAKE [14] commit 63a91033d52e64a22e571fe84924c0b7f21c280d Author: Masahiro Yamada <yamada.masahiro@socionext.com> kbuild: add generic mergeconfig target, %.config [15] commit 1cba0c305758c3c1786ecaceb03e142c95a4edc9 Author: Michal Marek <mmarek@suse.cz> kconfig: Simplify Makefile [16] commit 0a1f00a1c86421cc07cec87011c7cf4df68ee54b Author: Michal Marek <mmarek@suse.cz> kconfig: Do not print status messages in make -s mode Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Arjun Sreedharan <arjun024@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-07-27config: ti_omap5_common: Palmas power support in SPLPaul Kocialkowski
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage. This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-07-26cgtqmx6eval: Use standard boot scriptOtavio Salvador
Use more standard boot scripts and also add the capability of booting via NFS. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Align DCD settings with Congatec's U-bootOtavio Salvador
Use the same DCD settings from Congatec's U-boot tree for the P/N 016113 card. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add SATA supportOtavio Salvador
Add SATA support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add splash screen supportOtavio Salvador
Add LVDS and HDMI support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add USB supportOtavio Salvador
Add USB support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add PMIC supportOtavio Salvador
cgtqmx6eval has a PFUZE100 FSL PMIC connected to I2C2. Add support for it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add thermal supportOtavio Salvador
Add thermal support so that we can see the following message on boot: CPU: Industrial temperature grade (-40C to 105C) at 33C Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add ESDHC3 supportOtavio Salvador
cgtqmx6eval has an eMMC connected to ESDHC3. Add support for it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Fit into single linesOtavio Salvador
There is no need to use multiple lines when they fit into a single line. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Improve the error handlingOtavio Salvador
Perfoming an OR operation on the error is not a good approach. Return the error immediately for each ESDHC instance instead. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Staticize when possibleOtavio Salvador
Declare 'static' when possible. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Use the default CONFIG_SYS_PBSIZEOtavio Salvador
Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into the console and hitting enter afterwards, causes a hang in the system because CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error message: "Unknown command '' - try 'help'". Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve this problem. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Use default promptOtavio Salvador
Remove the custom prompt and use the default instead. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26mmc:fsl_esdhc invalidate dcache before readPeng Fan
DCIMVAC is upgraded to DCCIMVAC for the individual processor (Cortex-A7) that the DCIMVAC is executed on. We should follow the linux dma follow. Before DMA read, first invalidate dcache then after DMA read, invalidate dcache again. With the DMA direction DMA_FROM_DEVICE, the dcache need be invalidated again after the DMA completion. The reason is that we need explicity make sure the dcache been invalidated thus to get the DMA'ed memory correctly from the physical memory. Any cache-line fill during the DMA operations such as the pre-fetching can cause the DMA coherency issue, thus CPU get the stale data. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-07-26mx6sxsabresd: Use 'int' for return valuesFabio Estevam
The variable 'ret' is used to store the value returned by pfuze_mode_init(), so it should be of type 'int' instead of 'unsigned int' in order to correctly handle negative numbers. Fix the variable type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-26mx6sabresd: Use 'int' for return valuesFabio Estevam
The variable 'ret' is used to store the value returned by pfuze_mode_init(), so it should of type 'int' instead of 'unsigned int' in order to correctly handle negative numbers. Fix the variable type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-26warp: Add MAX77696 supportFabio Estevam
Warp has a MAX77696 PMIC connected via I2C1 bus. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-26power: pmic: Add support for MAX77696 PMICFabio Estevam
Add support for MAX77696 PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-26thermal: Fix commentsFabio Estevam
It seems that many comments were copied from the I2C uclass, so adjust the comments for the thermal class. Reported-by: Simon Glass <sjg@chromium.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-26imx: imximage: add new CHECK/CLR BIT commandAdrian Alonso
* Extend imximage DCD version 2 to support DCD commands CMD_WRITE_CLR_BIT 4 [address] [mask bit] means: while ((*address & ~mask) != 0); CMD_CHECK_BITS_SET 4 [address] [mask bit] means: while ((*address & mask) != mask); CMD_CHECK_BITS_CLR 4 [address] [mask bit] means: *address = *address & ~mask; * Add set_dcd_param_v2 helper function to set DCD command parameters Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-07-26arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoMStefan Roese
This patch adds support for the "OHB System AG" baseboard with is equipped with the TQMa6S SoM. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de>
2015-07-25Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2015-07-25sunxi: Enable both ehci and otg in host mode on various boardsHans de Goede
Now that the device-model port of the musb mode makes it possible, enable both the ehci and otg in host mode on boards where the musb is wired up in host only mode, either via an usb-a receptacle or via an usb <-> sata converter. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-07-25sunxi: ga10h: Enable both otg and regular usb host controllersHans de Goede
This allows using devices plugged into both ports of the tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-07-25sunxi: musb: Stop treating not having a vbus-det gpio as an errorHans de Goede
On some boards the otg is wired up in host-only mode in this case we have no vbus-det gpio. Stop logging an error from sunxi_usb_phy_vbus_detect() in this case, and stop treating sunxi_usb_phy_vbus_detect() returning a negative errno, as if a charger is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-07-25sunxi: musb: Improve output during probingHans de Goede
When we return an error the usb core will print an error-message, so in this case do not print anything. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2015-07-25sunxi: musb: Use device-model for musb host modeHans de Goede
Modify the sunxi musb glue to use the device-model for musb host mode. This allows using musb in host mode together with other host drivers such as ehci / ohci, which is esp. useful on boards which use the musb controller in host-only mode, these boards have e.g. an usb-a receptacle or an usb to sata converter attached to the musb controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-07-25sunxi: musb: Move musb config and platdata to the sunxi-musb glueHans de Goede
Move the musb config and platdata to the sunxi-musb glue, which is where it really belongs. This is preparation patch for adding device-model support for the sunxi-musb-host code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-07-25sunxi: musb: Add id pin supportHans de Goede
When in host mode check if there is a host cable inserted into the otg port by checking the id pin. If there is no host cable return an error to make usb_lowlevel_init() exit early, rather then waiting for 1 second for a device which will never show up. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-07-25sunxi: musb: Move vbus check to sunxi_musb_enableHans de Goede
This way it can be re-checked on "usb reset". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-07-25sunxi: usb-phy: Add support for reading otg id pin valueHans de Goede
Add support for reading the id pin value of the otg connector to the usb phy code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-07-25sunxi: Enable CMD_USB and USB_STORAGE by default on sunxiHans de Goede
Start using the new Kconfig options which are available for these now, and simply always enable them by selecting them as sunxi builds always include USB support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-07-25sunxi: Update selects in arch/arm/Kconfig for DM conversionsTom Rini
With certain features being convert to DM now we want sunxi to default to having DM enabled for ETH/SERIAL and USB in some cases. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Rini <trini@konsulko.com> [hdegoede@redhat.com: Also select CONFIG_USB for all sunxi builds] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-07-25sunxi: Remove bogus uart entry from utoo-p66 dts fileHans de Goede
At one point in time the utoo-p66 dts file in the kernel had a bogus uart entry, and it seems like we synced with the kernel at just the wrong moment. This commit removes the bogus uart entry, which breaks booting the utoo-p66 when DM_SERIAL=y. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-24Merge git://git.denx.de/u-boot-usbTom Rini
2015-07-24usb: ci_udc: fix request allocation when endpoints are disabledRob Herring
The ci_udc driver request allocation assumes that the endpoint descriptor pointer is set to retrieve the endpoint number, but that is only true when the endpoint is enabled. This results in a NULL ptr dereference which for me happens to return 0 value. This causes the EP0 request struct to be returned for other endpoints. Some gadget drivers like fastboot and USB MS work fine, but ethernet does not. Really, the ci_udc driver is the oddball here doing this EP0 special case handling Stephen added. All the other drivers alloc/free functions are pretty much the same with the only variation being the size of the private struct. This could all be consolidated to a common function. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marek Vasut <marex@denx.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2015-07-24sunxi: spl: Remove redundant check from `board_mmc_init` for signatureDaniel Kochmański
Remove the boot signature check from board_mmc_init() in spl mode, as it is already done in spl_boot_device() in this case, and update the comments to reflect this. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Disable the check only for SPL instead of always] Acked-by: Hans De Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-24sunxi: spl: Detect at runtime where SPL was read fromDaniel Kochmański
Make possible using a single `u-boot-sunxi-with-spl.bin` binary for both NAND memory and SD card. Detection where SPL was read from is implemented in `spl_boot_device`. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Some small coding style fixes] Acked-by: Hans De Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-24sunxi: Create helper function veryfing valid boot signature on MMCDaniel Kochmański
This patch extracts checking for valid SD card "eGON.BT0" signature from `board_mmc_init` into function `sunxi_mmc_has_egon_boot_signature`. Buffer for mmc sector is allocated and freed at runtime. `panic` is triggered on malloc failure. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Small bugfix to make it work for devs other then mmc0] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-24mmc: Protect `mmc_initialize` from initialising mmc multiple timesDaniel Kochmański
`mmc_initialize` might be called multiple times leading to the mmc-controllers being initialised twice, and initialising the `mmc_devices` list head twice which may lead to memory leaks. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> CC: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-24arm: marvell: Increase MAXARGS to 32Stefan Roese
This makes more complex U-Boot scripts possible. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-24arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot supportStefan Roese
This patch adds the configuration options to boot via SDIO/MMC on the Marvell DB-88F6820-GP Armada A38x board. The default boot device is still SPI NOR flash. To enable MMC booting on this board 2 things need to be changes: a) Change kwbimage.cfg BOOT_FROM sdio b) In the config header select #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD The generated image needs to be copied to the first bootable MMC partition: dd if=u-boot-spl.kwb of=/dev/sdX1 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
2015-07-24spl: spl_mmc: Add option to boot from a MMC partition with offsetStefan Roese
This patch introduces the option to boot from a MMC card parition with an offset. This can be done by using both defines together: define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((160 << 10) / 512) The example above loads the main U-Boot at offset 160KiB from the MMC partition 1. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Tom Rini <trini@konsulko.com>
2015-07-24kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFSStefan Roese
To use this offset for other boot device (like SDIO/MMC), lets rename it to a more generic name. This will be used be the SDIO/MMC SPL boot support for the A38x. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
2015-07-24kwbimage: Add support for SDIO/MMC boot device selectionStefan Roese
This patch adds support to select the "sdio" as boot device in the kwbimage.cfg file. This line selects this SDIO device: BOOT_FROM sdio Tested on Marvell DB-88F6820-GP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
generated by cgit (git 2.34.1) at 2025-01-15 06:42:42 +0000