summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-13ARM64: zynqmp: Add backward compatible string for uartMichal Simek
Mainline kernel has no r1p12 compatible string that's why console stops to work with the latest DTS files. Append generic compatible string. Keep in your mind that using this generic compatible string not all uart features will be available. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Fix coding style for pcieMichal Simek
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Extend pcie node to support legacy interruptsBharat Kumar Gogada
Modifying device tree node to support legacy interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add interrupt-controller property to gpio nodesMichal Simek
GPIO driver supports an input interrupt that's why gpio node itself can be labeled as interrupt controller. Reported-by: John Linn <linnj@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add ddrc node in dtsNaga Sureshkumar Relli
This patch adds ddrc memory controller node in dts. size mentioned in dts is 0x30000, because we need to access DDR_QOS INTR registers located at fd090208 from this driver. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Added clocks to DTVNSL Durga
ZynqMP DMA's main clock and apb clock are added in zynqmp DT. Signed-off-by: VNSL Durga <vnsldurg@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
2016-04-13ARM64: zynqmp: Add CCI-400 nodeMichal Simek
Add CCI-400 node to DTSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add missing interrupt-parent to PMU nodeMichal Simek
ZynqMP is not using global interrupt-parent setting that's why it has to be listed in every node separately. PMU node missed it and this patch is adding it. Reported-by: John Linn <John.Linn@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: DT: Add power domainsSoren Brinkmann
Add power-domains to the DT and attach devices to them. The power-domains are all logical domains as understood by firmware. Each PD is identified by a unique identifier that the platform firmware understands. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodesP L Sai Krishna
This patch adds broken-tuning property to SD and eMMC nodes. Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Sync GEM nodes with LinuxMichal Simek
Remove jumbo properties which are handled in the driver directly and use mainline compatible string which is already handled by the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Hook up the GEMs to the SMMUEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Correct IRQ nr for the SMMUEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add 8-bit bus width property.P L Sai Krishna
This patch add 8-bit bus width property to eMMC node. Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: dt: Change qspi node compatible stringRanjit Waghmode
This patch makes compatible string as "m25p80" for qspi node in ep108 device tree file Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add missing mmc aliasesMichal Simek
Add missing mmc aliases. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Use C pre-processor for includes in dtsAlistair Francis
Change the dtsi include code to use the C pre-processor #include instead of the device tree /include/. This brings all ZynqMP device trees inline with each other. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Move kernel and fdt offsets and sizes to board config fileSiva Durga Prasad Paladugu
Move kernel and fdt offsets and sizes to board config file as the flash size varies across boards Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Do not perform reset at the end of thorMichal Simek
Setup reset off for lthor. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Support systems with more memory banksMichal Simek
This is example how to change u-boot to support more memory banks read from DT. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Use memory initialization based on DTS fileMichal Simek
Remove hardcoded memory sizes. Use information from DT memory node. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Fix usb phy node for ZyboMichal Simek
Compatible property should be the first. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Extend microzed board supportMichal Simek
Add missing DT nodes and enable USB. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13ARM: zynq: Add missing qspi for xm013Michal Simek
Add missing qspi node and make qspi as spi0. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Create empty line below headersMichal Simek
Sync with others zynq DTS files. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Align spi and qspi node locationsMichal Simek
Keep nodes alphabelitally sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13ARM: zynq: zc706: Add adv7511 on i2c busChristian Kohn
Add missing adv7511 and configure to match Base TRD. Signed-off-by: Christian Kohn <christian.kohn@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: zc702: Add adv7511 on i2c busChristian Kohn
Add bindings for adv7511. Signed-off-by: Christian Kohn <christian.kohn@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: DT: Add ethernet phy reset informationPunnaiah Choudary Kalluri
Added phy reset gpio information for gem0. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Fix bootargs in board dtsiMichal Simek
- Sync with Linux kernel - Remove rootfs - Remove earlyprintk Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Align devcfg nodeMichal Simek
- Have compatible string as the first property - Sync with Linux kernel dtsi - Add missing interrupt properties Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: dts: Updated devicetree bindings for Zynq 7000 platformMoritz Fischer
Added addtional bindings required for FPGA Manager operation of the Xilinx Zynq Devc configuration interface. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.Moritz Fischer
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Add interrupt-controller property to gpio nodesMichal Simek
GPIO driver supports an input interrupt that's why gpio node itself can be labeled as interrupt controller. Reported-by: John Linn <linnj@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13Merge git://www.denx.de/git/u-boot-cfi-flashTom Rini
2016-04-13mtd: cfi: Unlock current sector instead of sector 0 before buffered writeRouven Behr
Unlock current sector instead of sector 0 before buffered write. [Patch subject and commit text slightly reworded, Stefan] Signed-off-by: Rouven Behr <u-boot@behr-iss.de> Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-04-12Merge git://www.denx.de/git/u-boot-marvellTom Rini
2016-04-12arm: mvebu: theadorable: Remove Board name output in checkboardStefan Roese
This line is not needed, as the board supports DT based probing. And here the "Model:" is already printed: Model: Marvell Armada XP theadorable Board: theadorable One line for the board name is enough. Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-12arm: mvebu: theadorable: Add PEX-switch detection and reset codeStefan Roese
Sometimes the PCIe link for the PEX-switch will not come-up. In this case, the board is not in a usable state. This patch makes sure that in this case a soft-reset is issued. If this soft-reset does not result in the PEX-switch being detected after some soft-reset cycles, an I2C message is sent to the uC to issue a complete power-cycle of the board. Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-12arm: mvebu: theadorable: Enable 2nd I2C controllerStefan Roese
This patch enables the 2nd I2C controller on the Armada XP theadorable board. Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-12arm: mvebu: Add base address for 2nd I2C controllerStefan Roese
Add MVEBU_TWSI1_BASE define so that the 2nd I2C controller on e.g. AXP can be used. Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-12arm: mvebu: theadorable: Add bootcounter supportStefan Roese
This patch adds bootcount support to the MVEBU theadorable board. Since no reset-safe registers seem to be available, it uses the last 4KiB of SDRAM for the bootcounter location. Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-12arm: mvebu: theadorable: Add USB power toggle and tweak USB PHY registerStefan Roese
This patch adds an USB power toggle for theadorable. Additionally, the USB PHY RX Channel Control 0 Register is changed to fix some issues noticed while accessing some specific USB sticks. Signed-off-by: Stefan Roese <sr@denx.de>
2016-04-12gpio: mvebu_gpio: Add missing out value set to gpio_direction_output()Stefan Roese
This patch adds the missing configuration of the output value to the gpio_direction_output() function. Without this, calling gpio_direction_output() does not set the out-value at all and only configures the gpio as output. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Kevin Smith <kevin.smith@elecsyscorp.com> Reviewed-by: Kevin Smith <kevin.smith@elecsyscorp.com>
2016-04-12sunxi: Add defconfig and dts file for Orange Pi One SBCHans de Goede
The Orange Pi One SBC, is a stripped down version of the popular Orange Pi PC. The one is a H3 based SBC, with 512M of RAM, micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12sunxi: H3: Do not clear usb companion clk-gate / reset on removeHans de Goede
On the H3 we need to enable the clk and de-assert the reset of the companion to be able to talk to the actual usb host controller. Before this commit we were also disabling the companion clk-gate / asserting its reset on remove, causing the later remove callback of the companion itself to (sometimes) fail with: ERROR: USB HC reset timed out! This commit fixes this by not disabling the companion's clk-gate nor asserting its reset on remove. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12sunxi: Enable CMD_GPIO on all sunxi boardsHans de Goede
We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after its Kconfig conversion it has ended up missing on some recently added boards. Simply select it for ARCH_SUNXI, so that we get it on all sunxi boards for both a consistent user experience and simpler defconfig files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12sunxi: Enable usb ports on the Sinovoip BPI M3Hans de Goede
DLDO3 is used to provide Port-D power and PD is used for the usb-hub / sata-5v enable pins. The 2.5V comes from the schematic and matches the factory image fex file. The dts changes are the minimal changes needed for u-boot to pick-up the usb host controllers. The upstream kernel does not (yet) have usb host support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12sunxi: Set DCDC1 to 3.3V on the Sinovoip BPI M3Hans de Goede
This is the value used in the fex file of the manufacturer images, and also the DCDC1 default. Sometimes lower values are used to save battery power, but that does not apply to a SBC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit (git 2.34.1) at 2024-12-28 00:49:23 +0000