summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-24arm64: versal: Enable CLK commandSiva Durga Prasad Paladugu
Enables clock command for dumping clocks. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable USB driver supportMichal Simek
This patch adds usb host and device mode support for Xilinx Versal virtual platform. By default USB host functionality is enabled. To use in usb device mode, set dr_mode property in DT to peripheral. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable LIBFDT_OVERLAYMichal Simek
Enable device tree overlay to build all dtbs for Versal with -@ flag to enable applying overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Turn comment to gpio-line-namesMichal Simek
Label gpio lines properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on zcu102Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: dt: Add optional gpio phy reset propertiesHarini Katakam
Add gpio phy reset via I2C expander TCA6416 on board ZCU102. A warning call trace is observer in probe when this reset is called from context that can sleep. Keep this commented until that is resolved in phylib. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: dt: Add missing DP83867 quirkHarini Katakam
The DP83867 strap control workaround is already present in Linux kernel mainline binding. All these Xilinx boards require this quirk. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable fpd_dma for zcu104 platformsMichal Simek
Enable fpd_dma for these boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu104Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on zcu106Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix the si570 clock frequency on zcu111Venkatesh Yadav Abbarapu
The si570 clock frequency should be 156.25MHz as per datasheet. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on zcu111Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: dt: Delete no-1-8-v property from zcu102-rev1.0T Karthik Reddy
Currently zcu102 Rev1.0 board includes RevA sdhci dt node which has no-1-8-v property. Since Rev1.0 has level shifters delete this property to enable support for 1.8v. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Remove fixme about memory size on zynqmp-p-a2197Michal Simek
System controller has 2GB of memory and fixme can be removed now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync si570 setup and clock namesMichal Simek
Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix m-a2197-01 DT based on latest schematicsMichal Simek
Remove some FIXMEs and align it with latest schematics. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Switch spi-flash to jedec,spi-nor on m-a2197Michal Simek
Mainline has done this switch and there is no reason not to switch it too. Mainline U-Boot patch which has done that switch: "dts: switch spi-flash to jedec, spi-nor compatible" (sha1: ffd4c7c2ecb745586239eb98d5dc0fe5e6ebe3bd) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on m-a2197-01Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on m-a2197-01Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix typo in zynqmp-p-a2197-00-revAMichal Simek
Trivial fix but not detected by checkpatch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Added new tps53679 compatible string for a2197-0x boardsNishant Mittal
Added tps53679 compatible string to tps53681. They are both compatible to each other and tps53679 has Linux driver already. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Fix i2c address of u70 on p-a2197-00 boardNishant Mittal
tps53681 is i2c address 0x60 not 0xc0. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Add label property to all ina226 on g-a2197-00Michal Simek
Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Enable iio-hwmon for ina226 on g-a2197-00Michal Simek
ina226 hwmon driver is deprecated and it is recommended to use new iio based driver. The patch is enabling iio-hwmon driver to export functionality from IIO to hwmon interface to be able to use lm-sensors package. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use ethernet-phy as node name for ethernet physMichal Simek
Ethernet phys based on devicetree specification should be using ethernet-phy@ node name instead of pure phy@. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Sync names for SC with VersalMichal Simek
ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Add missing pl353-smc nodeMichal Simek
DT binding was reviewed in Linux by commit b0b41af12a1b ("dt-bindings: memory: Add pl353 smc controller devicetree binding information") that's why this fragment can be also added to U-Boot repository. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24ARM: zynq: Move BOOTM_NETBSD to KconfigMichal Simek
The commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options") moved BOOTM_ options to Kconfig that's why align zynq defconfig with it. Disabling NETBSD was done by commit d6f48ea5ce18 ("ARM: zynq: Do not enable NETBSD support by default"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Enable GPIO command for VersalMichal Simek
Enable GPIO command for Xilinx Versal platform. Driver is updated that's why it can be used directly. Driver is enabled by default through Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24gpio: zynq: Add gpio driver support for PMC gpioShubhrajyoti Datta
This patch adds support for gpio driver for pmc gpio. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24gpio: zynq: Add gpio driver support for VersalAshok Reddy Soma
This patch adds support for gpio driver for versal platform Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24firmware: zynqmp: Clean up zynqmp_power_probeMichal Simek
Fix error debug messages to be more accurate and aligned with debug message style in the whole file. And do not initialize ret variable because it is initialized later on and it is just additional step. Fixes: 1327d1678bd2 ("firmware: zynqmp: Add zynqmp-power support") Reported-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-24firmware: zynqmp: Report error when xilinx_pm_request called from EL3Michal Simek
Function should report error when called in EL3 context. Also report it as error instead 0 (success). Reported-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-24arm64: zynqmp: Convert invoke_smc() to xilinx_pm_request()Michal Simek
Remove macros which use PM_SIP_SVC offset and convert invoke_smc() to xilinx_pm_request() which do calculation with PM_SIP_SVC already. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Rename versal_pm_request to xilinx_pm_requestMichal Simek
Use generic name instead of Versal specific because this should be also used on ZynqMP. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: xilinx: Move firmware functions from platform to driverMichal Simek
versal_pm_request() and invoke_smc() are almost the same. Only one difference is that versal_pm_request is adding PM_SIP_SVC offset to api_id. The patch is moving platform implementation to firmware driver code for synchronization. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-24arm64: versal: Clean pm_api_id usageMichal Simek
Copy enum values from platform code to firmware code. IDs are shared between ZynqMP and Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-23Merge tag 'u-boot-stm32-2019-10-23' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Disable CONFIG_NET flag for MCU STM32 - Fix ramdisk_addr_r for stm32f746-disco - Fix USB product id for stm32mp1
2019-10-23Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add LS1027A, LS1018A, LS1017A support - Few updates related to usb, ls1012a, lx2160a
2019-10-22board: stm32mp1: fixup the usb product id for USB download gadgetPatrick Delaunay
Select the correct USB product id used by the download gadget for ST stm32mp1 boards. The board stm32mp1 select the correct product id, as defined in http://www.linux-usb.org/usb.ids for the STMicroelectronics vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM): - dfu = 0xdf11 : STM Device in DFU mode it is the value used by ROM code and reused for stm32prog command - fasboot = 0x0afb : Android Fastboot device - others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM) Mass Storage Device it is used for UMS command / usb_dnl_ums This patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-22configs: stm32f746-disco: Fix ramdisk_addr_rPatrice Chotard
Set ramdisk_addr_r to 0xC0600000. Reported-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32h743-eval: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32h743-disco: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f469-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-evaluation: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-22configs: stm32f429-discovery: Disable CONFIG_NET flagPatrice Chotard
Network support was never added on this board, disable CONFIG_NET flag to avoid following warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2024-12-23 19:11:06 +0000