summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-06armv8: ls1088: Add fsl_fdt_fixup_flashAshish Kumar
IFC-NOR and QSPI-NOR signals are muxed on SoC to save pins Add fsl_fdt_fixup_flash() to disable IFC-NOR node in dts if QSPI is enabled and vice-versa Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06driver: net: fsl-mc: flib changes for MC 10.3.0Yogesh Gaur
Existing MC driver framework is based on MC-9.x.x flib. This patch migrates MC obj (DPBP, DPNI, DPRC, DPMAC etc) to use latest MC flib which is MC-10.3.0. Changes introduced due to migration: 1. To get OBJ token, pair of create and open API replaces create APIs 2. Pair of close and destroy APIs replaces destroy APIs 3. For version read, get_version APIs replaces get_attributes APIs 4. dpni_get/reset_statistics APIs replaces dpni_get/set_counter APIs 5. Simplifies struct dpni_cfg and removes dpni_extended_cfg struct 6. Single API dpni_get_buffer_layout/set_buffer_layout replaces dpni_get_rx/set_rx, tx related, tx_conf_buffer_layout related APIs. New API takes a queue type as an argument. 7. Similarly dpni_get_queue/set_queue replaces dpni_get_rx_flow/set_rx_flow , tx_flow related, tx_conf related APIs Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfigAshish Kumar
Unset USE_BOOTCOMMAND for all ls1088 defconfig files to fix redefinition error. USE_BOOTCOMMAND was introduced in commit b6251db8c3f ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-04Prepare v2018.01-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04Merge git://git.denx.de/u-boot-uniphierTom Rini
2017-12-04Merge git://git.denx.de/u-boot-cfi-flashTom Rini
2017-12-04arm: Make gcc 6.0 or later a hard requirement now.Tom Rini
Move the warning to an error as we have been promising would happen in this release. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04scripts: spl: fix typoPeng Fan
Typo fix: CONIFG->CONFIG Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04drivers: firmware: psci: use pr_* log functions instead of printf()Masahiro Yamada
In Linux, the warning messages are printed out by pr_warn(). We can use Linux-like log functions in tree-wide. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04omap3: evm: Explicitly use DISTRO_DEFAULTS features at startupDerald D. Woods
[primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot [fallback 1] Check MMC 0:1 zImage and run mmcbootz [fallback 2] Check MMC 0:1 uImage and run mmcboot [fallback 3] Check NAND partitions and run nandboot If 'extlinux.conf' is not found on MMC 0, the previous boot behavior is followed. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2017-12-04armv8: mmu: fix page table mappingPeng Fan
To page mapping the lowest 2 bits needs to be 0x3. If not fix this, the final lowest 3 bits for page mapping is 0x1 which is marked as reserved. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-04arm64 :show_regs: show the address before relocationPeng Fan
After relocation, when error happends, it is hard to track ELR and LR with asm file objdumped from elf file. So subtract the gd->reloc_off the reflect the compliation address. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04ARM: arch-meson: build memory banks using reported memory from registersNeil Armstrong
As discussed at [1], the Amlogic Meson GX SoCs can embed a BL31 firmware and a secondary BL32 firmware. Since mid-2017, the reserved memory address of the BL31 firmware was moved and grown for security reasons. But mainline U-Boot and Linux has the old address and size fixed. These SoCs have a register interface to get the two firmware reserved memory start and sizes. This patch adds a dynamic reservation of the memory zones in the device tree bootmem reserved memory zone used by the kernel in early boot. To be complete, the memory zones are also added to the EFI reserved zones. Depends on patchset "Add support for Amlogic GXL Based SBCs" at [2]. [1] http://lists.infradead.org/pipermail/linux-amlogic/2017-October/004860.html [2] http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005410.html Changes since v1: - switched the #if to if(IS_ENABLED()) to compile all code paths - renamed function to meson_board_add_reserved_memory() - added a mem.h header with comment - updated all boards ft_board_setup() Changes since RFC v2: - reduced preprocessor load - kept Odroid-C2 static memory mapping as exception Changes since RFC v1: - switch to fdt rsv mem table and efi reserve memory - replaced in_le32 by readl() Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [trini: Fix warning on khadas-vim over missing <asm/arch/mem.h> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04arm: Add Khadas VIM support based on Meson GXL familyNeil Armstrong
This adds platform code for the Khadas VIM board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-khadas-vim.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04arm: Add LibreTech CC support based on Meson GXL familyNeil Armstrong
This adds platform code for the Libre Computer CC "Le Potato" board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-libretech-cc.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04board: p212: use common ethernet init functionNeil Armstrong
Switch P212 Ethernet init to the common Ethernet init function. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04board: odroid-c2: use common ethernet init functionNeil Armstrong
Switch Odroid-C2 Ethernet init to the common Ethernet init function. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04ARM: arch-meson: add ethernet common init functionNeil Armstrong
Introduce a generic common Ethernet Hardware init function common to all Amlogic GX SoCs with support for the Internal PHY enable for GXL SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04libfdt: migrate fdt_wip.c to a wrapper of scripts/dtc/libfdt/fdt_wip.cMasahiro Yamada
Now, lib/libfdt/fdt_wip.c is the same as scripts/dtc/libfdt/fdt_wip.c Change the former to a wrapper of the latter. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04libfdt: move fdt_find_regions() to fdt_region.c from fdt_wip.cMasahiro Yamada
All the other fdt_*_region() functions are located in fdt_region.c, while only fdt_find_regions() was added to fdt_wip.c, strangely. Move it to the suitable place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-04armv8: shrink exception table codeAndre Przywara
In the moment our exception entry code needs 34 instructions, so we can't use put it directly into the table entry, which offers "only" 32 instructions there. Right now we just put an unconditional branch there, then use a macro to place the 34 instructions *per entry* after that. That effectivly doubles the size of our exception table, which is quite a waste, given that we use it mostly for debugging purposes. Since the register saving part is actually identical, let's just convert that macro into a function, and "bl" into it directly from the exception slot, of course after having saved at least the original LR. This saves us about 950 bytes of code, which is quite a relief for some tight SPLs, in particular the 64-bit Allwinner ones. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2017-12-04add support for Raspberry Pi Zero WDmitry Korunov
Signed-off-by: Dmitry Korunov <dessel.k@gmail.com>
2017-12-04test: compression: Convert to unit test frameworkSimon Glass
Adjust this test to use the unit test framework. Drop the two existing commands for running the tests and replace them with a single 'ut compression' command, with sub-commands. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Continue to have ret = run_test_internal(...) in run_test so ret is always initialized] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-04mtd: nand: denali: consolidate include directivesMasahiro Yamada
Include necessary headers explicitly without relying on indirect header inclusion. <common.h>, <malloc.h> are unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04mtd: nand: denali_dt: replace printf() with pr_err()Masahiro Yamada
The Linux derived log functions can be used anywhere and easily turned on/off by CONFIG_LOGLEVEL. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04mtd: nand: include <asm/cache.h> from include/linux/mtd/rawnand.hMasahiro Yamada
This is needed for ARCH_DMA_MINALIGN. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04mtd: nand: Rename nand.h into rawnand.hMasahiro Yamada
This header was renamed to rawnand.h in Linux. The following is the corresponding commit in Linux. commit d4092d76a4a4e57b65910899948a83cc8646c5a5 Author: Boris Brezillon <boris.brezillon@free-electrons.com> Date: Fri Aug 4 17:29:10 2017 +0200 mtd: nand: Rename nand.h into rawnand.h We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04mtd: nand: denali: remove ad-hoc board_nand_init() entryMasahiro Yamada
This driver is highly dependent on the configuration from denali_dt.c Please enable CONFIG_NAND_DENALI_DT if you use this driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04mtd: nand: denali: remove bogus __maybe_unusedMasahiro Yamada
denali_setup_data_interface() is always used. I put __maybe_unused for a temporal use, then forgot to delete it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04ARM: uniphier: clean up board_initMasahiro Yamada
Remove unnecessary DECLARE_GLOBAL_DATA_PTR and header includes. <common.h> has been replaced with <linux/errno.h> and <linux/printk.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04mtd: cfi: Fix checking status register featureYork Sun
Commit 72443c7f7d21 ("mtd: cfi: Add support for status register polling") added a feature check to determine if status register is available for certain flash chips. The "lower software bits" register used to determine this feature is not backward compati- ble. Older flash chips without this feature has reserved value 0xff. Instead of checking "lower software bits" register, use CFI primary vendor-specific extended query. Since CFI version 1.4, software features can be read from offset 0x53 according to document AN201168 from Cypress. Signed-off-by: York Sun <york.sun@nxp.com> CC: Marek Vasut <marek.vasut@gmail.com> Tested-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-12-02test/py: Allow any unit test suite to be foundSimon Glass
The u-boot.sym file is scanned to find unit test suites for execution. At present it only finds those whose names start with 'dm' or 'env'. This code is buried in the bowels of the test code so when adding a new suite it is not easy to discover why it is ignored by the test framework. There seems to be no need to make this restriction. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
2017-12-02test: compression: Put test variables in a structSimon Glass
At present the test setup is somewhat mixed with the test itself. But if the test setup fails (which it should not) then the test is actually invalid. Put all the test buffers and sizes in a struct and separate out the core code into a function. This will make it easier to move the code to use the unit test framework. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-02test: overlay: Use cmd_ut_category()Simon Glass
Adjust the code to use the common test-execution function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-02test: Add a command function for test executionSimon Glass
The logic to either iterate through a list of tests or pick a named test is common to at lest two test suits. Move this logic into a new function and call it from the environment tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-02omap2: set the ethaddr as well as the usbethaddr env var to ensure static MACPeter Robinson
The kernel gets the ethernet MAC from the ethaddr variable, the omap boards for devices with USB based eth adapters just set the usbethaddr which doesn't appear to get passed to the kernel. The same Raspberry Pi code sets both ethaddr and usbethaddr so lets do that so linux (tested 4.13 and 4.14) get a static rather than a random MAC address, while not regressing users of usbethaddr. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2017-12-01Merge git://git.denx.de/u-boot-rockchipTom Rini
2017-12-02rockchip: clk: rk3128: fix DCLK_VOP_DIV_CON_MASKPhilipp Tomsich
The DCLK_VOP_DIV_CON_MASK should cover only bits 8 through 15. Fix this to remove an "integer-overflow on shifted constant" warning. Fixes: 9246d9e ("rockchip: rk3128: add clock driver") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-02rockchip: clk: rk3128: fix NANDC_PLL_SEL_MASKPhilipp Tomsich
The PLL selector field for NANDC is only 2 bits wide. This fixes an 'int-overflow on shift' warning. Fixes: 9246d9e ("rockchip: rk3128: add clock driver") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: dts: rk3399-puma: add /config/sysreset-gpio propertyPhilipp Tomsich
On the RK3399-Q7, we want to trigger a full platform reset (so the various software stacks supported don't have to deal with the same complexities over and over again) in case that anything other than a power-on reset occurred. To do so, this defines the /config/sysreset-gpio property and has it point to a GPIO that will perform a power-on reset of the entire platform. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-11-30rockchip: rk3399-puma: add code to allow forcing a power-on resetPhilipp Tomsich
The reset circuitry in the RK3399 only resets 'almost all logic' when a software reset is performed. To make our software maintenance easier in the future, we want to have the option (controlled by a DTS property) to force all reset causes other than a power-on reset to trigger a power-on reset via a GPIO trigger. This adds the necessary support to the rk3399-puma (i.e. RK3399-Q7) board-support and the documentation for the new property (sysreset-gpio) within the /config-node. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-30rockchip: dts: rk3399-puma: add a 'tsd, usb-port-power' stringlist for USB1Philipp Tomsich
USB1 is connected to the on-module USB 3.0 hub and power to the hub (actually it's a reset signal, modeled as a fixed regulator, that will be released) should be enabled only during the first probing of the device to avoid the hub from entering its low-power mode (where it tries to attach on a fixed interval, but we always miss the timeslot when U-Boot has the controller listening). This adds a 'tsd,usb-port-power' stringlist to enable the infrastructure in the board-specific usb_hub_reset_devices to find and control the fixed regulator associated with control of the USB hub. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
2017-11-30rockchip: rk3399-puma: implement usb_hub_reset_devices for puma-rk3399Philipp Tomsich
For some versions of the RK3399-Q7 (at least revisions v1.1 and v1.2 are affected), we need to turn on the power for the port connected to the on-module USB hub only when the device is probed for the first time to ensure that the hub does not enter a low-power mode (that U-Boot's USB stack can't deal with). Note that this is needed for U-Boot only, as Linux eventually manages to attach the hub even when it has entered into its low-power state (when the hub wakes up the next time) after a few seconds. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
2017-11-30rockchip: rk3036: sdram: correct setting for pll integer modeKever Yang
According to rk3036 TRM, should be set to '1' for the pll integer mode, while the '0' means the frac mode. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3036: update clock driver for ddrKever Yang
After the MASK MACRO update, we need to update the driver at the same time. This is a fix to: 37943aa rockchip: rk3036: clean mask definition for cru reg Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3036: fix pll config for correct frequencyKever Yang
There is a fixed div-2 between PLL and clk_ddr/clk_ddrphy, so we need to double to pll output and then ddr can work in correct frequency. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: board: evb-rk3128: add empty MakefilePhilipp Tomsich
Even if the board-specific directory Makefile doesn't have any targets, it still needs to exist. This adds a minimal Makefile for the board/rockchip/evb_rk3128 directory and a evk-rk3128.c (as built-in.o needs to be built for every directory that a Makefile gets run for). Fixes: c7a6866 ("rockchip: rk3128: add evb-rk3128 support") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add sdram driverKever Yang
RK3128 support up to 2GB DDR3 sdram, one channel, 32bit data width. This patch is only used for U-Boot, but not for SPL which will comes later, maybe after we merge all the common code into a common file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add defconfig for evb-rk3128Kever Yang
Enable board config for evb-rk3128. Serial output and eMMC works in this version. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add evb-rk3128 supportKever Yang
evb-rk3128 is an evb from Rockchip based on rk3128 SoC: - 2 USB2.0 Host port; - 1 HDMI port; - 2 10/100M eth port; - 2GB ddr; - 16GB eMMC; - UART to USB debug port; Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit (git 2.34.1) at 2024-12-26 04:57:43 +0000