summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-13ARM: imx6q_logic: Enable MTD and NAND_MXS_DTAdam Ford
This patch supports enabling MTD, and the corresponding CMD_MTD along with enabling the MXS NAND Controller with device tree support. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13ARM: imx6_logic: Fix typo in FDT addressAdam Ford
A few scripts reference 'fdt_addr' when they should reference 'fdt_addr_r' so this patch fixes those broken references. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13include: configs: imx6-engicam: Add recovery boot optionShyam Saini
Combined with watchdog board reset mechanism, this can be used as recovery boot option after bootlimit exceeds the configured value. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13configs: imx6qdl_icore_mmc: Enable watchdog and bootcounterShyam Saini
Enable watchdog and bootcounter support on imx6qdl board Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13board: engicam: Add watchdog support on EngicamShyam Saini
This patch adds watchdog support for engicam imx6 family of boards. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13imx8qxp: Fix the reported CPU frequencyFabio Estevam
Currently the CPU frequency is incorrectly reported: CPU: NXP i.MX8QXP RevB A35 at 147228 MHz Fix this problem by using a direct call to the SCU firmware to retrieve the Cortex A35 CPU frequency. With this change applied the CPU frequency is displayed correctly: CPU: NXP i.MX8QXP RevB A35 at 1200 MHz Tested-by: Marcelo Macedo <marcelo.macedo@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com>
2019-03-13imx8mq_evk: Add myself as a co-maintainerFabio Estevam
I would like to help maintaining this board. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-03-13imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to KconfigFabio Estevam
Currently the command "saveenv" is not available. The CONFIG_ENV_IS_IN_MMC symbol has been converted to Kconfig, so fix the problem by moving it to the defconfig. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13mx6sabreauto: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-03-13mx6sabresd: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-03-13imx: mx6qsabrelite: Update the SabreLite READMEMartyn Welch
The information in the SabreLite README is inaccurate and sparse. The upstream U-Boot can boot the SabreLite from SPI-NOR. Additionally, the freely available imx_loader tool can be easily used to boot a board with a corrupted SPI, the official Freescale/NXP manufacturing tools are not required. Reformat the document, adding a description of how to boot from SPI-NOR and adding a brief description of how to recover the board should the SPI-NOR be corrupted using imx_loader. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-03-13imx8mq_evk/README: fix DDR training firmware pathBaruch Siach
Remove a redundant directory level. Reported-by: Ofer Heifetz <ofer.heifetz@valens.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13imx8mq_evk/README: add missing firmware extract stepBaruch Siach
Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13warp7: Fix the write to the LDOGCTL PMIC registerFabio Estevam
The third parameter of the pmic_clrsetbits() function is the mask to the register and the correct mask is 1 not 0. Since the LDOGCTL only contains a single valid bit (bit 0), we can use pmic_reg_write() and write 1 directly, which fixes the problem in a simpler way and use the original pmic function that was used prior to the DM PMIC conversion. Fixes: 8ba377321c86 ("arm: imx7s-warp: Convert to DM PMIC") Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-03-13mx6ul_14x14_evk: Simplify the PMIC register writesFabio Estevam
There is no need to store the values written to the PMIC inside the 'reg' variable. Make it simpler by writing the values directly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13warp7: Remove unneeded headers after DM conversionFabio Estevam
After DM conversion the I2C and MMC related board codes have been removed, so remove the corresponding header files as well. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-03-13warp7: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2019-03-13imx: ventana: added support for 16bit 8Gb density (1GiB) DRAMTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-03-13imx: ventana: hexdump invalid EEPROM dataTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-03-13ARM: liteboard: use random ethaddrMarcin Niestroj
There is no ethaddr assigned to each board, so we need to use random value in order to use network. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-03-13ARM: liteboard: move towards driver model and device-tree bootMarcin Niestroj
This patch mostly enables DM drivers in board defconfig and all their dependencies. Additionally we remove USB code that is on longer executed after enabling CONFIG_DM_USB. Enable CONFIG_PINCTRL, so we can get rid of ethernet pin configuration. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-03-13pico-imx6ul: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13pico-imx6ul: Convert to DM_PMICFabio Estevam
Convert to use DM_PMIC for the PFUZE3000. Since this PMIC is under an I2C bus, conver to DM_I2C as well. Also, since I2C is not used in SPL, remove CONFIG_SPL_I2C_SUPPORT to avoid build warnings. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13pico-imx6ul: Convert to CONFIG_DM_GPIOFabio Estevam
Convert to CONFIG_DM_GPIO. Also, DM GPIO requires gpio_request() to be called explicitly before doing any gpio operation, so do as requested. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13pico-imx6ul: Convert to DM MMCFabio Estevam
Select CONFIG_DM_MMC=y in order to support MMC driver model. This allows the MMC board related code to be removed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13pico-imx6ul: Select CONFIG_OF_CONTROLFabio Estevam
Select CONFIG_OF_CONTROL and the appropriate device tree files in preparation for converting to driver model. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13pico-imx6ul: Import dts files from kernelFabio Estevam
Import the device tree files from kernel 5.0-rc6 in preparation for driver model conversion. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13imx8mq_evk_defconfig: Enable pinctrl driverChris Spencer
The Ethernet controller is not able to initialise correctly without the pinctrl driver. This config setting was enabled in the initial version of this file, but was removed by a savedefconfig resync because the parameter did not actually exist at that point. Fixes: 1bac199e8c87 ("configs: Resync with savedefconfig") Signed-off-by: Chris Spencer <christopher.spencer@sea.co.uk> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-03-13pinctrl: add imx8m driverPeng Fan
Add i.mx8m pinctrl driver. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-03-12Merge tag 'efi-2019-04-rc4-2' of https://github.com/xypron2/u-bootTom Rini
Pull request for UEFI system for v2019.04-rc4 Fix an error with the serial communication on boards with a very small UART buffer which leads to a stalled system. Provide an X86 reset driver for the UEFI runtime.
2019-03-12ARM: Odroid XU3: Enable driver I2C support for OdroidXU3Anand Moon
This commit enables support for I2C S3C424X0 driver. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- axp818 fix - fix warnings for ethernet clock code
2019-03-11Merge git://git.denx.de/u-boot-x86Tom Rini
- ACPI changes and fixes to Intel Tangier/Edison - i8254 beeper fixes
2019-03-11x86: crownbay: Enable the beeper sound driverBin Meng
Use the i8254 sound driver to support creating simple beeps. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11x86: coreboot: Add the missing pc speaker node in the device treeBin Meng
This is currently missing and without it the i8254 beeper driver won't work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11x86: Add a dtsi file for the pc speakerBin Meng
The pc speaker driven by the i8254 is generic enough to deserve a single dtsi file to be included by boards that use it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11x86: Make sure i8254 is setup correctly before generating beepsBin Meng
The i8254 timer control IO port (0x43) should be setup correctly by using PIT counter 2 to generate beeps, however in U-Boot other codes like TSC driver utilizes PIT for TSC frequency calibration and configures the counter 2 to a different mode that does not beep. Fix this by always ensuring the PIT counter 2 is correctly initialized so that the i8254 beeper driver works as expected. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-11espresso7420: remove duplicated configMinkyu Kang
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: exynos: odroid: Fix build if BOARD_TYPES are not setKrzysztof Kozlowski
CONFIG_BOARD_TYPES is necessary for Odroid X/X2/U3 boards to detect proper revision. However building should succeed even without it. While moving code around, document also the reference clock selection. This fixes the build error without CONFIG_BOARD_TYPES: board/samsung/odroid/odroid.c: In function 'board_usb_init': board/samsung/odroid/odroid.c:473:8: error: 'gd_t' {aka 'volatile struct global_data'} has no member named 'board_type' if (gd->board_type == ODROID_TYPE_U3) ^~ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: dts: exynos: Adjust whitespace around status propertyKrzysztof Kozlowski
Just add spaces around '=' sign for clarity. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: exynos: Remove duplicated "boardname" env settingKrzysztof Kozlowski
Various places in the code set "boardname" env property. It was used for booting from ITB images and choosing proper DTB file name. Instead of duplicating it, use existing U-Boot wide - "board_name". Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11configs: odroid_xu3: Unify indentationKrzysztof Kozlowski
File mixed space and tab indentation. Unify it. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11configs: odroid_xu3: Use consistent syntax for #includeKrzysztof Kozlowski
When including other header from configs, use consistent <> syntax. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: exynos: arndale: Replace Chander Kashyap inactive maintainerKrzysztof Kozlowski
Last activity from Arndale (Exynos5250) board maintainer Chander Kashyap was in January 2014 (Signed-off). Recently his samsung.com email bounces with 550 (5.1.1 Recipient address rejected: User unknown). Add Krzysztof Kozlowski as odd fixer for this board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 familyKrzysztof Kozlowski
Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: dts: exynos: Add supply for ADC block to Odroid XU3 familyKrzysztof Kozlowski
The ADC block requires VDD supply to be on so provide one. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11power: regulator: s2mps11: Add enable delayKrzysztof Kozlowski
According to datasheet, the output on LDO regulators will start appearing after 10-15 us. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11regulator: Add support for ramp delayKrzysztof Kozlowski
Changing voltage and enabling regulator might require delays so the regulator stabilizes at expected level. Add support for "regulator-ramp-delay" binding which can introduce required time to both enabling the regulator and to changing the voltage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revisionKrzysztof Kozlowski
Fix detection of Odroid HC1 (Exynos5422) after reboot if kernel disabled the LDO4/VDD_ADC regulator. The LDO4 supplies both ADC block and the ADC input AIN9. Voltage on AIN9 will rise slowly, so use delay of 5 milliseconds instead of timers-based loop to wait for voltage stabilization. First reads on Odroid HC1 return 305, 1207, 1297 and finally 1308 (reference value is 1309). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: exynos: odroid-xu3: Display info late to have proper typeKrzysztof Kozlowski
Printing the "Type" of board requires proper detection of revision which can happen only late because regulators are needed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit (git 2.34.1) at 2025-01-10 19:59:57 +0000