summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-22efi_selftest: test for (Dis)ConnectControllerHeinrich Schuchardt
This unit test checks the following protocol services: ConnectController, DisconnectController, InstallProtocol, UninstallProtocol, OpenProtocol, CloseProtcol, OpenProtocolInformation Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: remove todo in device path testHeinrich Schuchardt
The installation of UninstallProtocol is functional now. So we do not expect errors when calling it. Call UninstallProtocol with correct level of indirection for parameter handle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: remove todo in manage protocolsHeinrich Schuchardt
The installation of UninstallProtocols is functional now. So we do not expect errors when calling it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: disconnect controllers in UninstallProtocolHeinrich Schuchardt
The UninstallProtocol boot service should first try to disconnect controllers that have been connected with EFI_OPEN_PROTOCOL_BY_DRIVER. If the protocol is still opened by an agent, it should be closed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: implement DisconnectControllerHeinrich Schuchardt
Unfortunately we need a forward declaration because both OpenProtocol and CloseProtocol have to call DisconnectController. And DisconnectController calls both OpenProtcol and CloseProtocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix signature of efi_disconnect_controllerHeinrich Schuchardt
Handles should be passed as efi_handle_t and not as void *. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: implement ConnectControllerHeinrich Schuchardt
Implement the ConnectController boot service. A unit test is supplied in a subsequent patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: debug output installed device pathHeinrich Schuchardt
When a device path protocol is installed write the device path to the console in debug mode. For printing the new macro EFI_PRINT is used, which can be reused for future diagnostic output. Remove unused EFI_PRINT_GUID macro Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: implement OpenProtocolInformationHeinrich Schuchardt
efi_open_protocol_information provides the agent and controller handles as well as the attributes and open count of an protocol on a handle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: fix counting error] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: open_info in CloseProtocolHeinrich Schuchardt
efi_open_protocol and efi_close_protocol have to keep track of opened protocols. Check if the protocol was opened for the same agent and controller. Remove all open protocol information for this pair. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: open_info in OpenProtocolHeinrich Schuchardt
efi_open_protocol has to keep track of opened protocols. OpenProtocol enters the agent and controller handle information into this list. A unit test is supplied with a subsequent patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: list of open protocol infosHeinrich Schuchardt
Add a list of open protocol infos to each protocol of a handle. Provide helper functions to access the list items. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: do not try to close device path protocolHeinrich Schuchardt
CloseProtocol cannot be called without agent handle. There is no need to close the device path protocol if it has been opened without agent handle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: simplify efi_remove_all_protocolsHeinrich Schuchardt
Replace list_for_each_safe() and list_entry() by list_for_each_entry_safe(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: colored test outputHeinrich Schuchardt
Add color coding to output: test section blue success green errors red todo yellow summary white others light gray Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> [agraf: Fold in move of set_attribute before the print] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22tools: provide a tool to convert a binary file to an includeHeinrich Schuchardt
For testing EFI disk management we need an in-memory image of a disk. The tool file2include converts a file to a C include. The file is separated into strings of 8 bytes. Only the non-zero strings are written to the include. The output format has been designed to maintain readability. #define EFI_ST_DISK_IMG { 0x00010000, { \ {0x000001b8, "\x94\x37\x69\xfc\x00\x00\x00\x00"}, /* .7i..... */ \ {0x000001c0, "\x02\x00\x83\x02\x02\x00\x01\x00"}, /* ........ */ \ {0x000001c8, "\x00\x00\x7f\x00\x00\x00\x00\x00"}, /* ........ */ \ {0x000001f8, "\x00\x00\x00\x00\x00\x00\x55\xaa"}, /* ......U. */ \ ... {0x00006000, "\x48\x65\x6c\x6c\x6f\x20\x77\x6f"}, /* Hello wo */ \ {0x00006008, "\x72\x6c\x64\x21\x0a\x00\x00\x00"}, /* rld!.... */ \ {0, NULL} } } As the disk image needed for testing contains mostly zeroes a high compression ratio can be attained. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correctly call imagesHeinrich Schuchardt
Avoid a failed assertion when an EFI app calls an EFI app. Avoid that the indent level increases when calling 'bootefi hello' repeatedly. Avoid negative indent level when an EFI app calls an EFI app that calls an EFI app (e.g. iPXE loads grub which starts the kernel). Return the status code of a loaded image that returns without calling the Exit boot service. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22vsprintf.c: add EFI device path printingHeinrich Schuchardt
For debugging efi_loader we need the capability to print EFI device paths. With this patch we can write: debug("device path: %pD", dp); A possible output would be device path: /MemoryMapped(0x0,0x3ff93a82,0x3ff93a82) This enhancement is not available when building without EFI support and neither in the SPL nor in the API example. A test is provided. It can be executed in the sandbox with command ut_print. The development for EFI support in the sandbox is currently in branch u-boot-dm/efi-working. The branch currently lacks commit 6ea8b580f06b ("efi_loader: correct DeviceNodeToText for media types"). Ater rebasing the aforementioned branch on U-Boot v2018.01 the test is executed successfully. Without EFI support in the sandbox the test is simply skipped. Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: text output for device path end nodeHeinrich Schuchardt
Without the patch a device path consisting only of an end node is displayed as '/UNKNOWN(007f,00ff)'. It should be displayed as '/'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22MAINTAINERS: correct entry for lib/efi*/Heinrich Schuchardt
lib/efi* indicates files efi* in directory lib. lib/efi*/ indicates all files in directories lib/efi*. Fixes: 623b3a579765 efi_selftest: provide an EFI selftest application Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: do not cut off u16 strings when printingHeinrich Schuchardt
Device paths can be very long. Due to a limited output buffer the output for device paths is cut off. We can avoid this by directly calling the boottime service with the the device path string. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: Remove coloring code change] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: avoid superfluous messages for task priority levelsHeinrich Schuchardt
In the task priority levels test debug output is written even if no failure is detected. Remove this distracting output. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: avoid superfluous messages for event servicesHeinrich Schuchardt
In the event services test debug output is written even if no failure is detected. Remove this distracting output. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: use correct format string for unsigned longHeinrich Schuchardt
virt_size is of type unsigned long. So it should be printed with %ul. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: add comments to memory functionsHeinrich Schuchardt
Add comments describing memory functions. Fix the formatting of a function declaration. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: use wide string do define firmware vendorHeinrich Schuchardt
As the U-Boot is compiled with -fshort-wchar we can define the firmware vendor constant as wide string. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: support device path for IDE and SCSI disksHeinrich Schuchardt
Correctly create the device path for IDE and SCSI disks. Support for SATA remains to be done in a future patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: create full device path for block devicesHeinrich Schuchardt
When creating the device path of a block device it has to comprise the block device itself and should not end at its parent. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22fs: fat: Drop CONFIG_SUPPORT_VFATTuomas Tynkkynen
fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since 2003), so as a result VFAT support is always enabled regardless of whether a board config defines it or not. Drop this unnecessary option. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22fs: FAT: Fix typo in FS_FAT_MAX_CLUSTSIZE descriptionTuomas Tynkkynen
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22env: ENV_IS_IN_FAT improvementsTuomas Tynkkynen
Make it select FS_FAT as well, because if it's not selected, enabling ENV_IS_IN_FAT causes a Kconfig warning: warning: (ENV_IS_IN_FAT) selects FAT_WRITE which has unmet direct dependencies (FS_FAT) This also allows dropping some code from config_fallbacks. Also drop the unnecessary help text about having to enable CONFIG_FAT_WRITE - Kconfig automatically handles that. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22ARM: poplar: Use Kconfig to enable CONFIG_FAT_WRITETuomas Tynkkynen
The symbol's been converted to Kconfig for a while, poplar is the only one #defining it. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22fs: Migrate ext4 to KconfigTuomas Tynkkynen
Migrate the following symbols to Kconfig: CONFIG_FS_EXT4 CONFIG_EXT4_WRITE The definitions in config_fallbacks.h can now be expressed in Kconfig. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22Convert CONFIG_ROCKCHIP_USB2_PHY to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ROCKCHIP_USB2_PHY Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_OMAP_USB_PHY to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_OMAP_USB_PHY Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_TWL4030_USB to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_TWL4030_USB Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_DAVINCI_SPI to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DAVINCI_SPI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_USB_MUSB_HCD et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_USB_MUSB_HCD CONFIG_USB_MUSB_UDC CONFIG_USB_DAVINCI CONFIG_USB_OMAP3 CONFIG_USB_DA8XX CONFIG_USB_AM35X Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22Convert CONFIG_USB_MUSB_OMAP2PLUS et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_USB_MUSB_OMAP2PLUS CONFIG_USB_MUSB_AM35X CONFIG_USB_MUSB_DSPS CONFIG_USB_MUSB_PIO_ONLY Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22ARM: omap3_logic: Enable SPL_OF_CONTROL and SPL_OF_PLATDATAAdam Ford
The SPL doesn't have much room, so in order to support OF_CONTROL in SPL, we need the extra functionality of SPL_OF_PLATDATA. Adding these features allows us to remove a small part of code without losing the serial port during SPL. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-22travis-ci: Add qemu-x86_64 targetTom Rini
Add qemu-x86_64 to the list of targets we use for test.py runs. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-22mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clockBenoît Thébaudeau
Commit 4f425280fa71 ("mmc: fsl_esdhc: Allow all supported prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode on i.MX, thus bypassing the SD clock frequency prescaler, in order to be able to get higher SD clock frequencies in some contexts. However, that commit missed the fact that this value is illegal on the eSDHCv3 instance of the i.MX53. This seems to be the only exception on i.MX, this value being legal even for the eSDHCv2 instances of the i.MX53. Fix this issue by changing the minimum prescaler value for the single instance of the i.MX53 eSDHCv3 controller. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-22mmc: fix the wrong disabling clockJaehoon Chung
When power is off, clock is not disabling. Because it's passed to 1, mmc->clock should be set to f_min value. Some drivers can't initialize the eMMC/SD card with current status. This patch is to fix the disabling clock value to 0. Fixes: 2e7410d76ad1 ("mmc: disable the mmc clock during power off") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: Guillaume GARDET <guillaume.gardet@free.fr> Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-22mmc: sdhci: change data transfer failure into debug messageMasahiro Yamada
During the tuning, drivers repeat data transfer, changing timing parameters in the controller hardware. So, the tuning commands (CMD19 for SD, CMD21 for eMMC) fail, and this is not a problem at all. Showing "Error detected..." in normal operation just make users upset. This should not be shown. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: sdhci-cadence: add HS200 supportMasahiro Yamada
Add HS200 timing setting and the MMC tuning callback. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-22mmc: sdhci-cadence: call mmc_of_parse()Masahiro Yamada
This is needed to parse more capabilities such as mmc-hs200-1_8v. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: sdhci-cadence: use bitfield access macros for cleanupMasahiro Yamada
This driver is a counterpart from the one in Linux. Follow the clean-up I did in Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()Masahiro Yamada
This line overwrites host_cap that has been set by drivers and/or helpers like mmc_of_parse(). Accumulate capabilities flags. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: let mmc_of_parse() fail for insane bus-width valueMasahiro Yamada
You must fix your DT if it specifies insane bus-width, for example, bus-width = <3>; debug() is not displayed in usual configuration, so people will not even notice weirdness. Use dev_err() instead, then let it fail. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: do not overwrite cfg->f_max if "max-frequency" if missingMasahiro Yamada
mmc_of_parse() in U-Boot is a pussy helper; it sets cfg->f_max to 52MHz even if DT does not provide "max-frequency" at all. This can overwrite cfg->f_max that may have been set to a reasonable default. As the DT binding says, "max-frequency" is an optional property. Do nothing if DT does not specify it. This is the behavior of mmc_of_parse() in Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit (git 2.34.1) at 2024-12-28 15:52:38 +0000