summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-11-29[PATCH] [MPC52xx] Use IPB bus frequency for SOC peripheralsGrant Likely
The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, not the XLB frequency. This patch depends on the previous patches for MPC52xx device tree support Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2006-11-29[PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boardsStefan Roese
This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are quite similar and share the same board directory "prodrive/p3mx" and the same config file "p3mx.h". Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-29[PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx commandStefan Roese
In the bootvx command the load address was only read from the env variable "loadaddr" and not optionally passed as paramter as described in the help. This is fixed with this patch. The behaviour is now the same as in the bootelf command. Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-29[PATCH] include/ppc440.h minor error affecting interruptsStefan Roese
Fixed include/ppc440.c for UIC address Bug Corrects bug affecting the addresses for the universal interrupt controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-28[PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.Stefan Roese
This patch adds the code and configuration necessary to boot with an arch/powerpc Linux kernel. Signed-off-by: Grant Likely <grant.likely@gmail.com> Acked-by: Jon Loeliger <jdl@freescale.com>
2006-11-28[PATCH] PPC4xx: 440SP Rev. C detection addedStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-28[PATCH] nand: Fix patch merge problemStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27Merge with /home/sr/git/u-boot/denx-alpr-merge-testWolfgang Denk
2006-11-27Update CHANGELOGWolfgang Denk
2006-11-27Merge with /home/sr/git/u-boot/4xx-enetWolfgang Denk
2006-11-27Merge with /home/sr/git/u-boot/nand-envWolfgang Denk
2006-11-27Merge with /home/sr/git/u-boot/nand-timeoutWolfgang Denk
2006-11-27Merge with /home/sr/git/u-boot/denx-ofWolfgang Denk
2006-11-27[PATCH] 4xx_enet.c: Correct the setting of zmiifer registerStefan Roese
Patch below corrects the setting of the zmiifer register, it was overwritting the register rather than ORing the settings. Signed-off-by: Neil Wilson <NWilson@airspan.com> Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27[PATCH] Select NAND embedded environment from board configurationStefan Roese
The current NAND Bootloader setup forces the environment variables to be in line with the bootloader. This change enables the configuration to be made in the board include file instead so that it can be individually enabled. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27[PATCH] nand_wait() timeout fixesStefan Roese
Two fixes for the nand_wait() function in drivers/nand/nand_base.c: 1. Use correct timeouts. The original timeouts in Linux source are 400ms and 20ms not 40s and 20s 2. Return correct error value in case of timeout. 0 is interpreted as OK. Signed-off-by: Rui Sousa <rui.sousa@laposte.net> Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27[PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernelStefan Roese
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 arguments to bootm. It removes the getenv("disable_of") test that used to be used for this purpose. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jon Loeliger <jdl@freescale.com>
2006-11-27Minor code cleanup. Update CHANGELOG.Wolfgang Denk
2006-11-27[PATCH] 4xx: Fix problem with board specific reset code (now for real)Stefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27[PATCH] alpr: remove unused board specific flash driverStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27[PATCH] 4xx: Fix problem with board specific reset codeStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27[PATCH] Remove testing 4xx enet PHY setupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27[PATCH] Update Prodrive ALPR board support (440GX)Stefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27Merge with /home/stefan/git/u-boot/denxStefan Roese
2006-11-27Merge with /home/sr/git/u-boot/denxWolfgang Denk
2006-11-23Updates for TQM5200 modules:Wolfgang Denk
- fix off-by-one error in board/tqm5200/cam5200_flash.c error message - simplify "udate" definitions
2006-11-22[PATCH] PPC4xx start.S: Fix for processor errataStefan Roese
Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx errata 1.12: 440_33 by moving patch up in code. Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-20[PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASHStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-20Update CHANGELOGWolfgang Denk
2006-11-20Merge with /home/sr/git/u-boot/cfi-updateWolfgang Denk
2006-11-13[PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]Stefan Roese
* Adds support for AMD command set Top Boot flash geometry reversal * Adds support for reading JEDEC Manufacturer ID and Device ID * Adds support for displaying command set, manufacturer id and device ids (flinfo) * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined * Removes outdated change history (refer to git log instead) Signed-off-by: Tolunay Orkun <listmember@orkun.us> Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-12Update CHANGELOGWolfgang Denk
2006-11-12Merge with /home/tur/proj/v38b/u-bootWolfgang Denk
2006-11-11Disable the watchdog in the default config for the V38B board.Bartlomiej Sieka
2006-11-11Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pinBartlomiej Sieka
group is enabled for USB earlier (in cpu_init_f() instead of usb_lowlevel_init()).
2006-11-10Merge with /home/stefan/git/u-boot/denxStefan Roese
2006-11-06Sequential accesses to non-existent memory must be synchronized,Wolfgang Denk
at least on G2 cores. This fixes get_ram_size() problems on MPC5200 Rev. B boards.
2006-11-02Merge with /home/tur/proj/uboot_linux_v38b/u-bootWolfgang Denk
2006-11-02Release U-Boot 1.1.6Wolfgang Denk
2006-11-01Finish up support for MarelV38B boardBartlomiej Sieka
- add watchdog support - enable GPIO_WKUP_7 pin for input - code cleanup
2006-11-01- Fix issues related to the use of ELDK 4 when compiling for MarelV38B:Bartlomiej Sieka
* remove warnings when compiling ethaddr.c * adjust linker script (fixes a crash resulting from incorrect definition of __u_boot_cmd_start) - Some MarelV38B code cleanup.
2006-11-01- Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change theBartlomiej Sieka
MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with MPC5XXX_WU_GPIO_DATA_O for affected boards. - Add defintions for some MPC5XXX GPIO pins.
2006-11-01Changed MarelV38B board make target to lowercase. Config file cleanup.Bartlomiej Sieka
2006-10-29Merge with /home/sr/git/u-boot/nand-ladisWolfgang Denk
2006-10-29Automatically adjust ARFLAGS so "make -s" is really silent.Wolfgang Denk
2006-10-28[PATCH] omap925.c: Remove unused functionsStefan Roese
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
2006-10-28[PATCH] Add some missing machtypes for netstar & voiceblue boardsStefan Roese
Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of numbers in code. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
2006-10-28[PATCH] NAND: Partition name support added to NAND subsystemStefan Roese
chpart, nboot and NAND subsystem related commands now accept also partition name to specify offset. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
2006-10-28Update CHANGELOG.Wolfgang Denk
2006-10-28Enable commandline editing and hush shell on all TQM boards.Wolfgang Denk
generated by cgit (git 2.34.1) at 2025-01-07 17:00:47 +0000