summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-16clk: mediatek: add driver for MT7622Sam Shih
This patch add clock driver for MediaTek MT7622 SoC. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-01-16pinctrl: mediatek: add support for different pinctrlSam Shih
Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16pinctrl: mediatek: add driver for MT7622Sam Shih
This patch add Pinctrl driver for MediaTek MT7622 SoC. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16ARM: MediaTek: Add support for MediaTek MT7622 SoCSam Shih
Add support for MediaTek MT7622 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16phy: phy-mtk-tphy: make ref clock optionalChunfeng Yun
If make the ref clock optional, no need refer to fixed-clock when the ref clock is always on or comes from oscillator directly. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16phy: phy-mtk-tphy: remove the check of -ENOSYSChunfeng Yun
No need check -ENOSYS anymore after add dummy_enable() for fixed-clock. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: fixed_rate: add dummy enable() functionChunfeng Yun
This is used to avoid clk_enable() return -ENOSYS. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: add APIs to get (optional) clock by name without a deviceChunfeng Yun
Sometimes we may need get (optional) clock without a device, that means use ofnode. e.g. when the phy node has subnode, and there is no device created for subnode, in this case, we need these new APIs to get subnode's clock. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: check valid clock by clk_valid()Chunfeng Yun
Add valid check for clk->dev, it's useful when get optional clock even when the clk point is valid, but its dev will be NULL. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: fix error check for devm_clk_get_optional()Chunfeng Yun
If skip all return error number, it may skip some real error cases, so only skip the error when the clock is not provided in DTS Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16clk: mediatek: mt7629: add support for ssusbsysChunfeng Yun
The SSUSB IP's clocks come from ssusbsys module on mt7629, so add its driver Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16ARM: MediaTek: add basic support for MT8512 boardsmingming lee
This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16mmc: mtk-sd: fix hang when data read quicklymingming lee
For CMD21 tuning data, the 128/64 bytes data may coming in very short time, before msdc_start_data(), the read data has already come, in this case, clear MSDC_INT will cause the interrupt disappear and lead to the thread hang. the solution is just clear all interrupts before command was sent. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCsmingming lee
This patch adds mmc support for MediaTek MT8512/MT8110 SoCs. MT8512/MT8110 SoCs puts the tune register at top layer, so need add new code to support it. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16pinctrl: mediatek: add driver for MT8512mingming lee
Add Pinctrl driver for MediaTek MT8512 SoC. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16clk: mediatek: add configurable pcw_chg_reg/ibits/fmin to mtk_pllmingming lee
Add configurable pcw_chg_reg/ibits/fmin to mtk_pll to support mt8512
2020-01-16clk: mediatek: add set_clr_upd mux type flowmingming lee
Add new set_clr_upd mux type and related operation to mtk common clock driver to support mt8512
2020-01-16clk: mediatek: add driver support for MT8512mingming lee
Add clock driver for MediaTek MT8512 SoC, include topckgen, apmixedsys and infracfg support. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16ARM: MediaTek: Add support for MediaTek MT8512 SoCmingming lee
Add support for MediaTek MT8512 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16MAINTAINERS: Fix mailSam Protsenko
Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change it to his home mail instead. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2020-01-16cmd/blk_common: clarify no partition error messageAlexandre Besnard
When no partition table is found, users should be warned so. Warning that no device is available in this case could be misleading, especially as it is the same error when no device is selected. Signed-off-by: Alexandre Besnard <alexandre.besnard@softathome.com>
2020-01-15test/py: use valid device tree in test_fit.pyHeinrich Schuchardt
The device tree compiler expects that a node with a unit-address has a reg property. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15Add dependencies for MALLOC_F and OF_LIBFDTSean Anderson
Some features implicitly depended on MALLOC_F and OF_LIBFDT and would fail at link-time if these features were not enabled. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15Include missing headers for asm-generic/sections.hSean Anderson
asm-generic/sections.h references ulong but does not include linux/types.h Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15dma: Add stub of dma_memcpy and dma_get_deviceVignesh Raghavendra
Add stub for dma_memcpy() and dma_get_device when CONFIG_DMA is disabled. This avoids ifdefs in driver code using DMA APIs Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMAVignesh Raghavendra
Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15Merge tag 'efi-2020-04-rc1-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc1-2 Bug fixes for the UEFI sub-system are provided: * imply VIDEO_ANSI for correct cursor positioning and colors * fix issues in the UEFI block device driver * add missing documentation
2020-01-15Merge tag 'u-boot-imx-20200115' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx ----------------------------------- - imx8: add capricorn giedi deneb boards - imx6: fixed fow wandboard - imx7: DM_ETHER for pico-imx7d - fsl_esdhc_imx: add broken-cd property - New SOC: IMXRT10xx Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/637126531
2020-01-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
- Important bugfix for some Tegra platforms
2020-01-15efi_loader: imply VIDEO_ANSIHeinrich Schuchardt
UEFI programs like GRUB make change terminal colors which requires support for ANSI escape sequences. Let CONFIG_EFI_LOADER=y imply CONFIG_VIDEO_ANSI. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_driver: debug output efi_uc_start, efi_uc_stopHeinrich Schuchardt
Use the correct printf codes for the debug output in efi_uc_start() and efi_uc_stop(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_driver: fix efi_uc_stop()Heinrich Schuchardt
Use the correct protocol in efi_uc_stop() when detaching the driver from the controller. Change the block IO unit test for the block device driver to throw an error instead of a todo if teardown fails. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_selftest: enable CONFIG_CMD_POWEROFFHeinrich Schuchardt
For automating testing we should be able to power off the test system. The implementation of EFI_RESET_SHUTDOWN requires the do_poweroff() function which is only available if CONFIG_CMD_POWEROFF=y. Enable CONFIG_CMD_POWEROFF if PSCI reset is available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_loader: describe returning of controlHeinrich Schuchardt
Provide a sober description of how control can be returned by a UEFI binary. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_loader: document functions in efi_rng.cHeinrich Schuchardt
Add the missing Sphinx documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-14imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14imx: Add basic support for the NXP IMXRT10xx SoC familyGiulio Benetti
Add i.IMXRT family basic support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14mmc: fsl_esdhc: add compatible for fsl, imxrt-usdhcGiulio Benetti
Add compatible "fsl,imxrt-usdhc" to make mmc working on i.MXRT platforms with CONFIG_DM_MMC=y. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14mmc: fsl_esdhc: make if(CONFIG_IS_ENABLED(CLK)) an #if statementGiulio Benetti
Not all architectures(i.e. i.MXRT) support mxc_get_clock() and use DM_CLK instead. So building could result in failure due to missing mxc_get_clock(). Make if(CONFIG_IS_ENABLED(CLK)) an #if statement. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14ram: add SDRAM driver for i.MXRT SoCsGiulio Benetti
Add SDRAM driver for i.MXRT SoCs. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14serial_lpuart: add support for i.MXRTGiulio Benetti
Add i.MXRT compatible string and cpu type support to lpuart driver, to use little endian 32 bits configurations. Also according to RM, the Receive RX FIFO Enable (RXFE) field in LPUART FIFO register is bit 3, so this definition should change to 0x08 as done for i.MX8. It needs also to set baudrate the same way as i.MX8 does. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14serial_lpuart: add clock enable if CONFIG_CLK is definedGiulio Benetti
This driver assumes that lpuart clock is already enabled before probing but using DM only lpuart won't be automatically enabled so add clk_enable() when probing if CONFIG_CLK is defined. If clock is not found, because DM is not used, let's emit a warning and proceed, because serial clock could also be already enabled by non DM code. If clock is found but cna't be enabled then return with error. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14ARM: dts: imxrt1050: add dtsi fileGiulio Benetti
Add dtsi file for i.MXRT1050. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14gpio: mxc_gpio: add support for i.MXRT1050Giulio Benetti
Add i.MXRT1050 support, there are 5 GPIO banks. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14pinctrl: add i.MXRT driverGiulio Benetti
Add i.MXRT pinctrl driver. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: add i.IMXRT1050 clk driverGiulio Benetti
Add i.MXRT1050 clk driver support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pfd: add set_rate()Giulio Benetti
Implement set_rate() for pfd. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add support for PLLV3_AV typeGiulio Benetti
Add support for PLLV3 AV type. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: pllv3: add PLLV3_SYS supportGiulio Benetti
Add PLLV3_SYS support by adding set/get_rate() for PLLV3_SYS but keeping generic enable()/disable(). Add a different driver because ops are different respect to GENERIC/USB. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-01-14clk: imx: pllv3: add set_rate() supportGiulio Benetti
Add generic set_rate() support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
generated by cgit (git 2.34.1) at 2025-01-01 03:29:34 +0000