summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-11board/sbc8560/sbc8560.c: Fix GCC 4.6 build warningKumar Gala
Fix: sbc8560.c: In function 'ft_board_setup': sbc8560.c:351:12: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11board/sbc8548/sbc8548.c: Fix GCC 4.6 build warningKumar Gala
Fix: sbc8548.c: In function 'local_bus_init': sbc8548.c:80:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warningKumar Gala
mpc8569mds.c: In function 'local_bus_init': mpc8569mds.c:306:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warningKumar Gala
Fix: mpc8568mds.c: In function 'local_bus_init': mpc8568mds.c:150:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable] mpc8568mds.c: In function 'pib_init': mpc8568mds.c:271:11: warning: variable 'orig_i2c_bus' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warningKumar Gala
Fix: mpc8548cds.c: In function 'local_bus_init': mpc8548cds.c:87:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable] mpc8548cds.c: In function 'lbc_sdram_init': mpc8548cds.c:121:7: warning: variable 'cpu_board_rev' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11board/freescale/common/pixis.c: Fix GCC 4.6 build warningKumar Gala
Fix: pixis.c: In function 'strfractoint': pixis.c:383:6: warning: variable 'intarr_len' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warningKumar Gala
Fix: cds_pci_ft.c: In function 'cds_pci_fixup': cds_pci_ft.c:31:12: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warningKumar Gala
Fix: fsl_lbc.c: In function 'upmconfig': fsl_lbc.c:110:9: warning: variable 'mdr' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warningKumar Gala
Fix: tlb.c: In function 'disable_tlb': tlb.c:175:34: warning: variable '_mas7' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warningKumar Gala
Fix: cpu_init.c: In function 'cpu_init_r': cpu_init.c:320:7: warning: variable 'l2srbar' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11phylib: Enable AR8021 phy supportXie Xiaobo
Enable AR8021 as it used on Freescale boards: P1020RDB-PC, P1021RDB-PC, P2020RDB-PC, P1020UTM-PC, and P1020MSBG-PC. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11powerpc/85xx: Set max alloc length to 10MB on P1022DSJerry Huang
In order to support 1920x01080 resolution, we must increase the alloc length. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> CC: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11powerpc/mpc85xx: Set SYSCLK to the required frequencyJerry Huang
For ICS307-02, there is one general expression to generate SYSCLK: CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) If we want the required frequency for SYSCLK, we must find one solution to generate this frequency, this solution includes VDW, RDW and OD. For OD, there are only eight option value: 10, 2, 8, 4, 5, 7, 3, 6. For RDW, the range is 1 to 127. For VDW, the range is 4 to 511. First, we use one OD, RDW and required SYSCLK to calculate the VDW, if VDW is in it's range, we will calculate the CLK1Frequency with the OD, RDW and VDW calculated, and we will check this percent (CLK1Frequency / required SYSCLK), and the precision is 1/1000. if the percent is less than 1/1000, we think the CLK1Frequency is we want. Otherwise, We will continue to calculate it with the next OD and RDW. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-11m28evk: Fix comment about the number of RAM banksFabio Estevam
m28evk has one bank of RAM. Fix the comment. Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2011-11-11mx31: Fix checkpatch warnings in generic.cFabio Estevam
Fix checkpatch warnings in generic.c. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2011-11-11mx31: Use proper IO accessor for GPR registerFabio Estevam
Use proper IO accessor for GPR register. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2011-11-11mx31: Remove duplicate definition for GPR registerFabio Estevam
GPR register definition is already available at imx-regs.h, so remove the duplication. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2011-11-11qong: Use generic function for configuring GPR registerFabio Estevam
Use generic function for configuring GPR register. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2011-11-11M28EVK: Enable USB HOST supportMarek Vasut
This enables the second port, aka. the port with the USB connector on the M28EVK. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
2011-11-11iMX28: Add USB HOST driverMarek Vasut
This driver supports both EHCI ports on the i.MX28 CPU. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
2011-11-11iMX28: Add USB and USB PHY register definitionsMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
2011-11-11M28: Add memory detection into SPLMarek Vasut
This code allows the DDR DRAM size to be detected at runtime. The RAM size is stored into two scratch registers, from which it is then fetched in U-Boot. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Fix ARM vector handlingMarek Vasut
This patch introduces proper ARM vector handling for i.MX28 CPU. This issue wasn't addressed because the interrupts weren't enabled on any ARMv5 core, therefore the issue wasn't noticed earlier. In previous implementation, the vectoring code used by i.MX28 CPU when an exception happened was that of the SPL. With this change, the branch target when an exception happens can be reconfigured by U-Boot. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11M28: Add doc/README.m28 documentationMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11M28: Add MMC SPLMarek Vasut
This patch adds SPL code for the M28 board. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add support for DENX M28EVK boardMarek Vasut
This contains support for the following components: - DUART - MMC - Both FEC interfaces - NAND - I2C (RTC, EEPROM) - SPI (FLASH) Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add u-boot.sb target to MakefileMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add image header generator toolMarek Vasut
This tool can now generate proper image for "BootStream" files. NOTE: This tool now works only for NAND. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add driver for internal RTCMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add GPMI NAND driverMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add APBH DMA driverMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add SPI driverMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add GPIO controlMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add I2C bus driverMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Acked-by: Heiko Schocher<hs@denx.de>
2011-11-11iMX28: Add PINMUX controlMarek Vasut
Taken from Linux kernel with minor modifications: commit bf985969e27b507f734435a99df8bf745a3dbb2b Author: Shawn Guo <shawn.guo@freescale.com> Date: Mon Dec 20 22:57:43 2010 +0800 ARM: mxs: Add iomux support Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11FEC: Add support for iMX28 quirksMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Ben Warren <biggerbadderben@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11iMX28: Add SSP MMC driverMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Acked-by: Andy Fleming <afleming@gmail.com>
2011-11-11iMX28: Initial support for iMX28 CPUMarek Vasut
This patch supports: - Timers - Debug UART - Clock Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
2011-11-11MX25: zmx25: GCC4.6 fix build warningsStefano Babic
Fix: zmx25.c: In function 'board_late_init': zmx25.c:131:25: warning: variable 'padctl' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-11-10VIDEO: mx3fb: GCC4.6 fix build warningsStefano Babic
Fix: mx3fb.c: In function 'video_hw_init': mx3fb.c:827:30: warning: variable 'vesa_idx' set but not used Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de>
2011-11-10Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bugJerry Huang
When the resolution is set to 800x600 and 1024x768, but, the driver will use 1280x1024 resolution to set the DIU register Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Acked-by: Timur Tabi <timur@freescale.com>
2011-11-10da850: add new config file for AM18xxNagabhushana Netagunte
add new configuration file da850_am18xxevm.h for AM18xx boards which are based on da850 SOC. AM18xx has WINBOND spi flash which is indicated in the config file. And make appropriate changes in board.cfg for building. Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-10BeagleBoard: config: Switch to ttyO2Alexander Holler
This is needed to support the latest kernel versions. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-10OMAP3: Change omap3_evm maintainerTom Rini
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-10devkit8000: Fix NAND SPL on boards with 256MB NANDTom Rini
The devkit8000 ships with either a 128MB or 256MB NAND chip. In order for SPL to work with 256MB NAND CONFIG_SYS_NAND_5_ADDR_CYCLE needs to be set. After talking with Scott Wood this should be safe to set even for smaller NAND chips. Cc: Scott Wood <scottwood@freescale.com> Cc: Frederik Kriewitz <frederik@kriewitz.eu> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-10integrator: enable Vpp and disable flash protectionLinus Walleij
This enables Vpp and disables the flash protection on the Integrator when starting U-Boot. The integrator/AP has double protection mechanisms: this one and the EBI protection bit (patch earlier), the Integrator/CP has only one line of protection in these registers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-10integrator: add system controller headerLinus Walleij
Break out the AP system controller and CP "CP controller" registers into a header file, it gives better overview than hardcoding its values and other disturbing practices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-10integrator: make flash writeable on bootLinus Walleij
This reconfigures the EBI (External Bus Interface) on the integrator so that chip select 1, handling the flash memory, is set to writeable. Without this it is not possible for U-Boot to access flash memory and it crashes on startup since CFI won't work properly. Since this is the first time we use the EBI, we create a header file for its registers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-10integrator: use io-accessors for board initLinus Walleij
Casting around to *(volatile ulong *) doesn't look good, so include the <asm/io.h> macros and use good old readl() instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-10integrator: move text offset to configLinus Walleij
Do away with the config.mk file and move the text offset to the config files to make things easier. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-01-23 17:06:53 +0000