summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-16MIPS: bootm.c: use debug macro to print debug messageGabor Juhos
The '## Transferring control ...' message is printed only if DEBUG is enabled. Get rid of the 'ifdef DEBUG' statement and use the debug macro instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
2013-01-15Prepare v2013.01Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-01-14pxa: Save lr register in relocate_code functionŁukasz Dałek
When u-boot is compiled for PXA25x processor, pxa/start.S is calling cpu_init_crit by BL instruction. BL is overwriting lr register so relocate_code is going into infinite loop. This patch preservs lr register in r12 before calling cpu_init_crit and after function returns restores it. Signed-off-by: Lukasz Dalek <luk0104@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2013-01-14Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2013-01-14Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini
2013-01-14twl4030: fix 'could could' in error messagesPeter Meerwald
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
2013-01-14watchdog.h: Move hw_watchdog_init prototype to end, guardTom Rini
In commit abbab70 we added a prototype for hw_watchdog_init, in a Freescale i.MX watchdog driver. We did not however guard it with an __ASSEMBLY__ check and broke some platforms. Move this to the end of the file with other prototypes and guard it. Signed-off-by: Tom Rini <trini@ti.com>
2013-01-14VIDEO: better document the correct use of CONFIG_FB_ADDRWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> cc: Anatolij Gustschin <agust@denx.de>
2013-01-14lcd: restore ability to display 8 bpp BMPs on 16 bpp LCDsNikita Kiryanov
Commit fb6a9aab7ae78c (LCD: display 32bpp decompressed bitmap image) broke the check that allowed U-Boot to display 8 bpp BMPs on a 16 bpp LCD screen, effectively turning this feature off. Restore this feature by changing the check back to the same meaning it originally had. To avoid future confusion, the check has also been rephrased to make its meaning clear. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2013-01-14Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-14Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-14video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selectedAjay Kumar
Previously, the call to draw_logo() was happening irrespective of whether we have selected logo or LCD console. With this patch we call draw_logo() only when CONFIG_CMD_BMP is selected. This would even fix the following compilation warning: exynos_fb.c: In function 'draw_logo': exynos_fb.c:74:8: warning: variable 'addr' set but not used [-Wunused-but-set-variable] exynos_fb.c:73:9: warning: variable 'y' set but not used [-Wunused-but-set-variable] exynos_fb.c:73:6: warning: variable 'x' set but not used [-Wunused-but-set-variable] Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-14video: exynos_dp: Remove unused variable disp_infoAjay Kumar
Remove unused variable disp_info to fix the following compilation warning: exynos_dp.c: In function 'exynos_init_dp': exynos_dp.c:860:23: warning: variable 'disp_info' set but not used [-Wunused-but-set-variable] Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-14I2C: S3C24X0: Resolve build error for VCMA9Rajeshwari Shinde
This patch resolves the following build errors for I2C driver in VCMA9: In file included from s3c24x0_i2c.c:40:0: s3c24x0_i2c.h:38:17: error: field 'id' has incomplete type s3c24x0_i2c.c:70:39: error: 'CONFIG_MAX_I2C_NUM' undeclared here (not in a function) s3c24x0_i2c.c:70:31: warning: 'i2c_bus' defined but not used [-Wunused-variable] s3c24x0_i2c.c:72:12: warning: 'i2c_busses' defined but not used [-Wunused-variable] Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-13mx51evk: Add DVI output supportFabio Estevam
Add DVI output support and make it the default video output. Currently the CLAA WVGA panel is supported, but this panel has to be purchased separately, so using the DVI output as the default would allow more people to try the splash screen feature on a mx51evk. If someone still wants to use the CLAA WVGA, just set the panel variable as: set panel claa Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-13mx6qsabresd: Fix booting the kernel from SDHC3Fabio Estevam
Since commit de7d02aeb (mx6qsabresd: add usdhc2 and usdhc4 support) SDHC3 device node is no longer 0, which breaks loading a uImage from SDHC3. Fix it by adapting the default environment to use CONFIG_SYS_MMC_ENV_DEV as the correct mmc node for loading the kernel from. While at it, go back to using SDHC3 as the default mmc, since we have Yocto images that generate an SD card containing U-boot,kernel and rootfs, so it is more convenient to keep using SDHC3 as it was originally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-13mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or notOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-13mx6qsabrelite: Add support to dynamically choose between fdt use or notOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx53loco: Add support to dynamically choose between fdt use or notOtavio Salvador
The CONFIG_SYS_CBSIZE has been change to 512 to avoid runtime errors as: ,---[ Runtime error ] | Hit any key to stop autoboot: 0 | MX53LOCO U-Boot > pri netboot | netboot=echo Booting from net ...; run netargs; if test ... | prefetch abort | pc : [<20747368>] lr : [<20747365>] | sp : af566e20 ip : 00000000 fp : 00000000 | r10: 00000002 r9 : af6dfc28 r8 : af566f58 | r7 : af6dfc10 r6 : 00000001 r5 : 00000002 r4 : 74206669 | r3 : 00000000 r2 : 00000060 r1 : 00000020 r0 : 0000018e | Flags: nZCv IRQs off FIQs off Mode SVC_32 | Resetting CPU ... | | resetting ... `--- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx28evk: Add support to dynamically choose between fdt use or notOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx28evk: We shouldn't hardcode a rootfs filesystem typeOtavio Salvador
For a generic environment, we shouldn't have a fixed rootfs filesystem so we drop it from env. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx6qsabrelite: Use tabs to environment settingOtavio Salvador
This rework the environment to use tabs for environment setting as done in other boards. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky
Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-01-12arm: at91sam9x5: add dataflash boot supportBo Shen
Add dataflash boot support on at91sam9x5ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-01-11m68k/lib: fix serial driver relocationangelo
Fix coldfire serial driver bindings no more relocated to ram after last changes to drivers/serial/serial.c (regression). Serial initialization in ram has to be called after that gd->reloc_off is calculated. Signed-off-by: Angelo Dureghello <sysamfw@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
2013-01-11Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-01-11Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-11EXYNOS5: Enable console multiplexing in u-bootAjay Kumar
We enable console multiplexing and use both serial and LCD for stdout/stderr. Initially, u-boot output console is observed via serial port. If you also have a DP panel connected onto your SMDK5250 board, you can switch to LCD console by typing "setenv stdout lcd". You can always switch back to serial using "setenv stdout serial". You can switch error console(stderr) as well, using similar commands. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11EXYNOS5: Make all display related code dependent on CONFIG_LCDAjay Kumar
u-boot compilation fails for smdk5250 when we deselect CONFIG_LCD from the main config file. Following error was observed: drivers/video/libvideo.o: In function `exynos_lcd_init': /home/ajay/u-boot-samsung/drivers/video/exynos_fb.c:68: undefined reference to `lcd_set_flush_dcache' This is because exynos video drivers have dependency on CONFIG_LCD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clkJaehoon Chung
Mobile storage is used the CLK_DIV_FSYS3 value. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11Exynos: clock: support get_mmc_clk for exynosJaehoon Chung
To get exactly clock value for mmc, support the get_mmc_clk() like set_mmc_clk(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMTJavier Martinez Canillas
IGEP board PC16550D (ns16550) UART doesn't set the Transmitter Empty (TEMT) Bit in SPL. This makes U-Boot to hang while waiting for TEMT. Add the CONFIG_SYS_NS16550_BROKEN_TEMT config option to avoid this issue. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2013-01-10serial/ns16550: add an option to avoid hanging on broken platformsJavier Martinez Canillas
Some platforms (e.g. IGEPv2 board) has a broken ns16550 UART that does not set the TEMT bit when the transmitter is empty in SPL. This makes U-Boot to hang while waiting for TEMT to be set. Add a new option to avoid this: CONFIG_SYS_NS16550_BROKEN_TEMT 16550 UART set the Transmitter Empty (TEMT) Bit when all output has finished and the transmitter is totally empty. U-Boot waits for this bit to be set to initialize the serial console. On some broken platforms this bit is not set in SPL making U-Boot to hang while waiting for TEMT. Define this option to avoid it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2013-01-10Makefile: remove MLO.byteswap on clobberNishanth Menon
On clobber, do a cleanup even for SPL build else, we'd have MLO.byteswap remaining for certain platforms like am33xx SPL builds Signed-off-by: Nishanth Menon <nm@ti.com>
2013-01-10OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_NAND_SUPPORTJavier Martinez Canillas
When booting an IGEPv2 board from NAND with SPL, U-Boot hangs trying to read the OMAP General Purpose Memory Controller (GPMC). The reason is that the GPMC initialization function is called inside spl_board_init() and this function is only executed when CONFIG_SPL_BOARD_INIT is defined. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-01-10Prepare v2013.01-rc3Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-01-10bootm: relocate names of sub-command table for archs with ↵Daniel Schwierzeck
CONFIG_NEEDS_MANUAL_RELOC To make bootm sub-command feature working on archs with CONFIG_NEEDS_MANUAL_RELOC, the name pointers in the sub-command table need to be relocated. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-01-10arm: Tabify code for MMC initializationTaylor Hutt
The two modified lines were indented with spaces. They are now indented with tabs. Signed-off-by: Taylor Hutt <thutt@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Move bootstage record for board_init_f() to after arch_cpu_init()Simon Glass
The timer may be inited in arch_cpu_init() so it is not safe to make a bootstage mark before this is called. Arrange the code to fix this. Note: The question was raised as to why we don't keep all archs in sync. PowerPC doesn't have specific bootstage markers at present (although it does use boot progress). I hope that the generic board series will solve this problem in general, but in the meantime this is a real problem, and only in ARM. We now get a correct time for board_init_f: Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 848,530 748,530 board_init_f 907,301 58,771 board_init_r 910,478 3,177 board_init Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Make interrupts.o and reset.o in libarm also appear in SPLTom Wai-Hong Tam
SPL u-boot may call do_reset() which depends on interrupts.o and reset.o. So make them also appear in SPL. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10Add option to display customised memory informationSimon Glass
Some boards want to report more than just memory size. For example, it might be useful to display the memory type (DDR2, DDR3) or manufacturer. Add a weak function to support this requirement, accessed through a new 'meminfo' command. Any example of the DRAM: output is below, just for illustration: SMDK5250 # meminfo DRAM: 2 GiB Elpida DDR3 @ 800MHz Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCDSimon Glass
This option displays board info after stdio is running, so that it will appear on the LCD. If it is displayed earlier, the board info will appear on the serial console but not on the LCD. Here follows a blow-by-blow description. 1a. Without CONFIG_DISPLAY_BOARDINFO_LATE, on serial: U-Boot 2011.12-02550-g037e1c5-dirty (Nov 15 2012 - 14:29:42) for SMDK5250 CPU: S5PC520 @ 1700MHz Board: Google Snow, rev 0 I2C: ready DRAM: 2 GiB Elpida DDR3 @ 800MHz MMC: S5P MSHC0: 0, S5P MSHC1: 1 SF: Detected W25Q32 with page size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 1b. Without CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is missing): In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 2a. With CONFIG_DISPLAY_BOARDINFO_LATE, on serial: U-Boot 2011.12-02550-g037e1c5 (Nov 15 2012 - 14:27:40) for SMDK5250 CPU: S5PC520 @ 1700MHz I2C: ready DRAM: 2 GiB Elpida DDR3 @ 800MHz MMC: S5P MSHC0: 0, S5P MSHC1: 1 SF: Detected W25Q32 with page size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment Model: Google Snow In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 2b. With CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is present): Model: Google Snow In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # Since the LCD is all that a typical user sees, it is useful to display the model there. We may be able to rearrange things some other way one day, but at present this seems like a convenient way of getting the required behaviour. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10Document the CONFIG_DISPLAY_BOARDINFO optionSimon Glass
Add a short note about this in the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loadingSimon Glass
This option delays loading of the environment until later, so that only the default environment will be available to U-Boot. This can address the security risk of untrusted data being used during boot. Any time you load untrusted data you expose yourself to a bug in the code. The attacker gets to choose the data so can sometimes carefully craft it to exploit a bug. We try to avoid touching user-controlled data during a verified boot unless strictly necessary. Since the default environment is good enough in this case (or you would just change it), this gets around the problem by just not loading the environment. When CONFIG_DELAY_ENVIRONMENT is defined, it is convenient to have a run-time way of enabling loading of the environment. Add this to the fdt as /config/delay-environment. Note: This patch depends on http://patchwork.ozlabs.org/patch/194342/ Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org>
2013-01-10arm: Move fdt check earlier so that board_early_init_f() can use itSimon Glass
We want to use the fdt inside board_early_init_f(), so check for its presence earlier in the pre-reloc init sequence. So far ARM and microblaze are the only only ones that use CONFIG_OF_CONTROL. Microblaze does not have the same init loop, and in particular does not have the board_early_init_f() call. So a patch for microblaze would have no meaning. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Keep track of the tlb size as well as its locationGabe Black
It may be necessary to know where the TLB area ends as well as where it starts. This allows board code to complete a secure memory erase without destroying the page tables. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: move flush_dcache_all() to just before disable cacheArun Mankuzhi
In Cortex-A15 architecture, when we run cache invalidate the cache clean operation executes automatically. So if there are any dirty cache lines before disabling the L2 cache these will be synchronized with the main memory when invalidate_dcache_all() runs in the last part of U-boot The two functions after flush_dcache_all is using the stack. So this data will be on the cache. After disable when invalidate is called the data will be flushed from cache to memory. This corrupts the stack in invalida_dcache_all. So this change is required to avoid the u-boot hang. So flush has to be done just before clearing CR_C bit Signed-off-by: Arun Mankuzhi <arun.m@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10cfi_flash: Report Advanced Sector Protection (PPB) with flinfo cmdStefan Roese
Report the usage of the Advanced Sector Protection (PPB) to the user upon 'flinfo' command. E.g: Bank # 1: CFI conformant flash (16 x 16) Size: 64 MB in 512 Sectors AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E2301 Advanced Sector Protection (PPB) enabled Erase timeout: 16384 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 32 bytes Sector Start Addresses: FC000000 E FC020000 E RO FC040000 E FC060000 E FC080000 E ... Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10cfi_flash: Enable PPB protection for all AMD cmdset flash chipsStefan Roese
Not only Spansion supports the Persistent Protection Bits (PPB) locking. Other devices like the Micron JS28F512M29EWx also support this type of locking/unlocking. Detection of support is done in the same way as done for the Spansion chips - via the 0x49 CFI word. This patch enables this PPB protection mechanism for all AMD type (AMD commandset) chips. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10cfi_flash: Read PPB sector protection from device for AMD/Spansion chipsStefan Roese
Patch 66863b05 [cfi_flash: add support for Spansion flash PPB sector protection] introduced the PPB (Persistent Protection Bit) locking for Spansion chips. But right now the sector protection status (locked vs unlocked) is set to unlocked for all sectors upon bootup. The real sector protection status is ignored. This patch now reads the current sector protection status and uses it for these AMD/Spansion flash chips. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
generated by cgit (git 2.34.1) at 2024-12-30 20:22:15 +0000