summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-23ARM: PSCI: initialize stack pointer on secondary CPUsStefan Agner
A proper stack is required to safely use C code in psci_arch_cpu_entry. Fixes: 486daaa618e1 ("arm: psci: add a weak function psci_arch_cpu_entry") Cc: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Patrick DELAUNAY <Patrick.delaunay@st.com> Tested-by: Patrick DELAUNAY <Patrick.delaunay@st.com>
2018-07-23arm: imx7d: cl-som-imx7: sf: support all SF typesUri Mashiach
Enable the support for all SPI flash types. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Yaniv Levinsky <yaniv.levinsky@compulab.co.il>
2018-07-23i.MX6: engicam: gpr_init can be called only for some architectureMichael Trimarchi
Fix an invalid usage of the gpr_init function for the imx6ul architecture Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-23imx: imx6: Add comment to gpr_init functionMichael Trimarchi
This function can be used only for some of the nxp SoC. Make it explicit in the comment. This adjust a bit commit 3aa4b703b483f165dd ("imx: imx6: Move gpr_init() function to soc.c") Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-23mx7: Remove BMODE supportFabio Estevam
i.MX7 does not support BMODE due to the erratum e10574 ("Watchdog: A watchdog timeout or software trigger will not reset the SOC"), so remove its support. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-07-23imx: mx6: Fix implementantion reset_miscMichael Trimarchi
lcdif_power_down should not be included in spl build to avoid build failure introduced by commit eb111bb31d882877e75e6b8083808dcaf6493b92 Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-07-23eth: dm: fec: Add gpio phy reset bindingMichael Trimarchi
Add the missing gpio phy reset binding to the gpio and reset time configuration Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-23mx6cuboxi: Add emmc device tree suffixJon Nettleton
Mainline and now the SolidRun 4.9 nxp based tree use the new reorganization of device-tree files that separate out the emmc into its own dtb. u-boot will now look for -emmc in the device tree name if one is detected. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2018-07-23mx6cuboxi: Use mmc_get_op_cond() to check for an eMMCJon Nettleton
Previously we had just made broad assumptions with which of our boards had an eMMC or not even though this is a manufacturing time assembly option. This takes the guessing away and actually checks for the existence of an eMMC and sets up the has_emmc environment variable. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2018-07-23mx6cuboxi: drop CONFIG_SYS_FSL_USDHC_NUMBaruch Siach
This macro is not used. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2018-07-23mx6cuboxi: Add support for eMMC bootingJon Nettleton
The HB2 boards as well as rev 1.5 soms support eMMC booting as well as SDHC. Add the infrastructure to support booting these devices. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2018-07-23mmc: break out get_op_cond code to its own functionJon Nettleton
This code is useful for testing the existance of devices that do not have card detect capabilities. This breaks out the core functionality and leaves the actual init logic and error reporting in mmc_start_init(). Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-07-23mmc: drop mention of IN_PROGRESS statusBaruch Siach
The IN_PROGRESS macro has been removed in commit bd47c13583f (mmc: Fix splitting device initialization). Remove it from the mmc_start_init() function description. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2018-07-23board: toradex: add Colibri iMX6ULL supportStefan Agner
Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23board: toradex: add new and upcoming SKUsStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23ARM: dts: imx6ull: use same compatible string as Linux is usingStefan Agner
The GPMI NAND IP seems to be the same as used in i.MX 6Quad. Use the fsl,imx6q-gpmi-nand compatible string like Linux devices trees are. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23imx: add macro to detect whether USB has been initializedStefan Agner
This macro allows to detect whether the boot ROM initialized USB already (serial downloader). This is helpful to reliably detect if the system has been recovered via USB serial downloader. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2018-07-23mtd: nand: mxs_nand: add device tree support for i.MX 6Stefan Agner
Support i.MX 6 NAND GPMI driver data from device tree. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23bootcount: flush after storing the bootcounterStefano Babic
If the bootcounter address is in a cached memory, a flush of dcache must occur after updateing the bootcounter. Issue found on i.MX6 where bootcounter is put into the internal (cached) IRAM. Signed-off-by: Stefano Babic <sbabic@denx.de>
2018-07-21env: Simplify Makefile using $(SPL_TPL_)York Sun
Add Kconfig options SPL_ENV_* and TPL_ENV_* and simplify Makefile. This allows SPL/TPL image has different environment setting from full feature U-Boot. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-21env: typo in description of ENV_IS_IN_REMOTEHeinrich Schuchardt
%s/remove/remote/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-07-20Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
2018-07-21rockchip: utilize CONFIG_DEFAULT_FDT_FILEKlaus Goger
Currently the fdtfile environment variable is set to CONFIG_DEFAULT_DEVICE_TREE which is Ñ–nternally used as U-Boot devicetree source. The OS can use a different filename and Kconfig gives us the ability to select a default devicetree via CONFIG_DEFAULT_FDT_FILE. This also gives user configuring U-Boot via menuconfig the behaviour someone would expect. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Tested-By: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: veyron: Set vcc33_sd regulator valueCarlo Caione
On the veyron board the vcc33_sd regulator is used as vmmc-supply for the SD card. This regulator is powered in the MMC core during power on but its value is never actually set. In the veyron platform the reset value for the LDO output is 1.8V while the standard (min and max) value for this regulator defined in the DTS is 3.3V. When the MMC core enable the regulator without setting its value, the output is automatically set to 1.8V instead of 3.3V. With this patch we preemptively set the value to 3.3V. Signed-off-by: Carlo Caione <carlo@endlessm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rk3288: Disable JTAG function from sdmmc0 IOCarlo Caione
The GRF_SOC_CON0.grf_force_jtag bit is automatically set at boot and it is preventing the SDMMC to work correctly. Disable the JTAG function on the assumption that a working SD has higher priority over JTAG. Signed-off-by: Carlo Caione <carlo@endlessm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rk3288: veyron: Init boot-on regulatorsCarlo Caione
Use regulators_enable_boot_on() to init all the regulators with regulator-boot-on property. Signed-off-by: Carlo Caione <carlo@endlessm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: board: lion-rk3368: increase phy autonegotiation timeoutJakob Unterwurzacher
The first dhcp command consistently fails with a timeout when the lion-rk3368 board is connected to a Zyxel GS1100-24E Gigabit Ethernet switch: ethernet@ff290000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Increasing PHY_ANEG_TIMEOUT from the default 4000 to 8000 makes the first dhcp command work reliably. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: rk3399: spl: add missing \n to outputHeinrich Schuchardt
Without the patch SPL (in case of an error) creates an output like: U-Boot SPL board initMissing DTB The patch adds the missing line feed. So now we get: U-Boot SPL board init Missing DTB Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: doc: clarify usage of CONFIG_SPL_ROCKCHIP_BACK_TO_BROMHeinrich Schuchardt
Change the description relating to CONFIG_SPL_ROCKCHIP_BACK_TO_BROM to clarify that both RK3288 and RK3036 use CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: evb-rk3399: correct README for board bring upHeinrich Schuchardt
%s/rkflashtool/rkdeveloptool/ We are using rkdeveloptool not rkflashtool. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2018-07-21rockchip: rk3399: change boot_target based on u-boot, spl-boot-deviceKlaus Goger
The order distroboot searches for a boot.scr is fixed at compile time. To make BIOS_DISABLE work as expected and boot from mmc1 instead of mmc0 if enabled, we need to change the environment at runtime. Especially as commit: 482cf22333 ("rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE") enables the eMMC in U-Boot even if BIOS_DISABLE is active. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: rk3399: inject 'u-boot, spl-boot-device' for next-stagePhilipp Tomsich
This implements the new 'spl_perform_fixups' hook for RK3399-based boards and injects the /chosen/u-boot,spl-boot-device with an ofpath corresponding to the boot device used. The intended usage is for the full U-Boot stage to evaluate this in scripts and then adapt its boot-order when using distro-boot. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-07-21spl: document 'chosen/u-boot, spl-boot-device'Philipp Tomsich
To let the full U-Boot know where it was booted from (i.e. which of the entries in /chosen/u-boot,spl-boot-order' contained a valid image), we define (and document) /chosen/u-boot,spl-boot-device as the property that could/should automatically be injected by SPL. This commit only contains a documentation change, which documents the new property and the intended usage. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-07-21spl: record boot_device into spl_image and call spl_perform_fixupsPhilipp Tomsich
On some boards, we want to give the board/architecture-specific code a chance to look at where the next image has been loaded from and perform fixups before starting the next image. This is of particular importance, when we probe multiple devices for bootable payloads and boot the first one found. This change adds the following: - we record the boot_device used into the spl_image structure - we provide an extension-point for boards/architectures that can perform late fixups depending on a fully populated spl_image structure (i.e. we'll know the final boot_device and have info on the image type and operating system to be booted). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-07-21smartweb: use SPL_TINY_MEMSETPhilipp Tomsich
The SPL code for smartweb is close to its limit and adding a few extra instructions to SPL will cause it to overrun its sram allotement (thus causing build failures). To allow adding the 'spl_perform_fixups' extension point to SPL, we'll enable SPL_TINY_MEMSET for smartweb. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Series-cc: trini
2018-07-21rockchip: rk3188: add rk_board_late_init() hookAlexander Kochetkov
All other rockchip boards have rk_board_late_init() hook, so add it to rk3188 boards also. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: i2c: enable i2c controller for rk3066 and rk3188Alexander Kochetkov
rk3066 and rk3188 has two I2C controller implementations. Current I2C driver wan't work with legacy implementation. Switching between controllers is performed using a bit inside GFR_SOC_CON1 register. The bit setting is performed by pinctrl driver. The patch ask pinctrl to do settings. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [fix warnings by including the rk3228 variant in the compatible-list]: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-20Merge git://git.denx.de/u-boot-x86Tom Rini
2018-07-20board/imgtec/boston: Add new defconfigs to the MAINTAINERS listTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-20Fix README for Khadas VIM boardLoic Devulder
Explicitly add 'python' call for 'acs_tool.pyc', to avoid failed execution on some OSes. Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-20configs: Update Meson GX configsLoic Devulder
Enable ADC support on the Khadas VIM board. Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-20ARM64: meson: Sync DT with Linux 4.17.5Loic Devulder
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.5 (Linux commit 54fb3c180d05e9dfda892a93413514e99f0cbb19). This will enable HDMI_5V for USB Amlogic Meson GXL P212 based boards. Signed-off-by: Loic Devulder <ldevulder@suse.de>
2018-07-20test/py: add test for whitelist of variables while importing environmentQuentin Schulz
This tests that the importing of an environment with a specified whitelist works as intended. If there are variables passed as parameter to the env import command, those only should be imported in the current environment. For each variable passed as parameter, if - foo is bar in current env and bar2 in exported env, after importing exported env, foo shall be bar2, - foo does not exist in current env and foo is bar2 in exported env, after importing exported env, foo shall be bar2, - foo is bar in current env and does not exist in exported env (but is passed as parameter), after importing exported env, foo shall be empty ONLY if the -d option is passed to env import, otherwise foo shall be bar, Any variable not passed as parameter should be left untouched. Two other tests are made to test that size cannot be '-' if the checksum protection is enabled. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2018-07-20cmd: nvedit: env import can now import only variables passed as parametersQuentin Schulz
While the `env export` can take as parameters variables to be exported, `env import` does not have such a mechanism of variable selection. Let's add the ability to add parameters at the end of the command for variables to be imported. Every env variable from the env to be imported passed by parameter to this command will override the value of the variable in the current env. If a variable exists in the current env but not in the imported env, if this variable is passed as a parameter to env import, the variable will be unset ONLY if the -d option is passed to env import, otherwise the current value of the variable is kept. If a variable exists in the imported env, the variable in the current env will be set to the value of the one from the imported env. All the remaining variables are left untouched. As the size parameter of env import is positional but optional, let's add the possibility to use the sentinel '-' for when we don't want to give the size parameter (when the env is '\0' terminated) but we pass a list of variables at the end of the command. env import addr env import addr - env import addr size env import addr - foo1 foo2 env import addr size foo1 foo2 are all valid. env import -c addr env import -c addr - env import -c addr - foo1 foo2 are all invalid because they don't pass the size parameter required for checking, while the following are valid. env import addr size env import addr size foo1 foo2 Nothing's changed for the other parameters or the overall behaviour. One of its use case could be to load a secure environment from the signed U-Boot binary and load only a handful of variables from an other, unsecure, environment without completely losing control of U-Boot. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Tested-by: Alex Kiernan <alex.kiernan@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2018-07-20hashtable: do not recreate whole hash table if vars are passed to himport_rQuentin Schulz
When vars are passed to the himport_r function with H_NOCLEAR flag, those vars will be overridden in the current environment and if one of those vars is not in the imported environment, it'll be deleted in the current environment whatever the flag passed to himport_r. The H_NOCLEAR flag is used to clear the whole environment whether vars are passed to the function or not. This leads to incoherent behaviour. If one passes vars to himport_r with the H_NOCLEAR flag, if a var in vars is not in the imported env, that var will be removed from the current env. If one passes vars to himport_r without the H_NOCLEAR flag, the whole environment will be removed and vars will be imported from the environment in RAM. It makes more sense to keep the variable that is in the current environment but not in the imported environment if the H_NOCLEAR flag is set and remove only that variable if the H_NOCLEAR flag is not set. Let's clear the whole environment only if H_NOCLEAR and vars are not passed to himport_r. Let's remove variables that are in the current environment but not in the imported env only if the H_NOCLEAR flag is not passed. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
2018-07-20test/py: remove hacks for non-zero RAM base address in testsQuentin Schulz
Some functions have different behaviour when the given address is 0 (assumed to be NULL by the function). find_ram_base() does not return 0 anymore so it's safe to remove those offsets. Suggested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2018-07-20test/py: return a RAM address different from 0 as it can be interpreted as NULLQuentin Schulz
Some functions test that the given address is not NULL (0) and fail or have a different behaviour if that's the case (e.g. hexport_r). Let's make the RAM base address to be not zero by setting it to 2MiB if that's the case. 2MiB is chosen because it represents the size of an ARM LPAE/v8 section. Suggested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2018-07-20env: add the same prefix to error messages to make it detectable by testsQuentin Schulz
The error message should start with `## Error: ` so that it's easily detectable by tests without needing to have a complex regexp for matching all possible error message patterns. Let's add the `## Error: ` prefix to the error messages since it's the one already in use. Suggested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2018-07-20stm32mp1: clk: support digital bypassPatrick Delaunay
HSE and LSE bypass shall support both analog and digital signals. This patch add a way to select digital bypas case in the device tree and set the associated bit DIGBYP in RCC_BDCR and RCC_OCEN register during clock tree initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20stm32mp1: clk: add ADC clock gatingPatrick Delaunay
Add ADC clock gating, that may be used by STM32 ADC. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2024-12-26 15:57:11 +0000