summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-18arm: socfpga: Add board files for the Arria10Ley Foon Tan
Add support for the Arria10 SoCDK. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add config and defconfig for Arria 10Ley Foon Tan
Add config and defconfig for the Arria10 and update socfpga_common.h. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add SPL support for Arria 10Ley Foon Tan
Add SPL support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: dts: Add dts and dtsi for Arria 10Ley Foon Tan
Device tree files for Arria 10 Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add misc support for Arria 10Ley Foon Tan
Add misc support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add pinmux for Arria 10Ley Foon Tan
Add pinmux support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add sdram header file for Arria 10Ley Foon Tan
Add sdram header file for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add system manager for Arria 10Ley Foon Tan
Add system manager register struct and macros for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add clock driver for Arria 10Ley Foon Tan
Add clock driver support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add reset driver support for Arria 10Ley Foon Tan
Add reset driver support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add A10 macrosLey Foon Tan
Add i2c, timer and other A10 macros. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure misc driverLey Foon Tan
Restructure misc driver in the preparation to support A10. Move the Gen5 specific code to gen5 file. Change all uint32_t_to u32. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure system managerLey Foon Tan
Restructure system manager in the preparation to support A10. No functional change. Change uint32_t to u32. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure reset manager driverLey Foon Tan
Restructure reset manager driver in the preparation to support A10. Move the Gen5 specific code to gen5 files. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure clock manager driverLey Foon Tan
Restructure clock manager driver in the preparation to support A10. Move the Gen5 specific code to _gen5 files. - Change all uint32_t to u32 and change to use macro BIT(n) for bit shift. - Check return value from wait_for_bit(). So change return type to int for cm_write_with_phase() and cm_basic_init(). Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18usb: lpc32xx: add i2c DM supportLiam Beguin
Add DM support for i2c functions. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-18pinctrl: imx: fix memory leakPeng Fan
Each time set_state is called, a new piece memory will be allocated for pin_data, but not freed, this will incur memory leak. When error, the devm API could not free memory automatically. So need call devm_kfree when error. Issue reported by Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: fix secure config after switching to DMStefano Babic
mx7dsabresd_secure_defconfig was not updated after moving to DM. Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: switch to DM USBPeng Fan
Switch to use DM USB. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2017-05-18imx: mx7dsabresd: reset ENET_RST_BPeng Fan
Reset ENET_RST_B to make ENET function stable. Since DM_GPIO enabled, we use "gpio_spi@0_5" which corresponds to ENET_RST_B. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: enable more DM driversPeng Fan
Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. The 74x164 drivers needs SOFT_SPI and DM_GPIO enabled. So needs to enable them together. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18gpio: 74x164: make oe-pins optionalPeng Fan
Make oe-pins optional because some boards have fixed it to enable. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-18spi: kconfig: add soft spi Kconfig entryPeng Fan
Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the SPI signals. We use it for accessing 74x164 on some i.MX boards. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add usdhc supportPeng Fan
Add usdhc support Signed-off-by: Peng Fan <peng.fan@nxp.com>
2017-05-18arm: dts: imx7d-sdb: add i2c supportPeng Fan
Add i2c support. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add regulator node for usb and mmcPeng Fan
Add regulator node for usb and mmc. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add spi gpio nodePeng Fan
Add spi gpio node for 74LV595. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb add basic dtsPeng Fan
Add basic dts for i.MX7D-SDB board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7: sync with LinuxPeng Fan
Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'"). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-05-18imx: ventana: update imx wdog external reset dt propertyTim Harvey
Early backports of the imx wdog external reset feature occured before the property was accepted upstream and used 'ext-reset-output' instead of 'fsl,ext-reset-output'. In order to support older kernels remove both properties. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-05-18imx: ventana: fix GW520x external watchdog dt updateTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-05-18mx6sabresd: Remove non-SPL targetsFabio Estevam
Now that mx6sabresd_spl_defconfig can be used to boot all mx6sabresd variants, the non-SPL targets can be safely removed. Signed-off-by: Fabio Estevam <fabio.estvam@nxp.com>
2017-05-18mx6sabresd: Add SPL support for the mx6dl variantFabio Estevam
Add support for the mx6dlsabresd board in SPL. Retrieved the DCD table from: board/freescale/mx6sabresd/mx6dlsabresd.cfg (NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga) Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabresd boards. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-18mx6sabresd: Prepare for supporting MX6DLFabio Estevam
Currently only MX6Q/QP sabresd boards are supported in SPL. In order to also support MX6DL we need to convert to using IOMUX_PADS and SETUP_IOMUX_PADS macros. Other than that move the <asm/arch/mx6-ddr.h> header inclusion to the SPL code block in order to avoid build error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-18engicam: common: Move board_late_initJagan Teki
Move board_late_init into common area from supported boards. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18engicam: common: Move common board codeJagan Teki
Move possible common board code into common area from supported boards. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18geam6/isiot: Move the spl code commonJagan Teki
SPL code for geam6 and isiot are same, so move them in common area. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6[_rqs]: Move the spl code commonJagan Teki
SPL code for icorem6 and icorem6_rqs are same, so move them in common area. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18i.MX6UL: isiot: Add SETUP_IOMUX_PADSJagan Teki
Add generic SETUP_IOMUX_PADS function, for imx6ul mux pads and use them in Is.IoT board. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18isiot: Fix to use usdhc2_pads for mmc2Jagan Teki
mmc2 in Is.IoT using usdhc1_pads instead usdhc2_pads, so update the same. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18i.MX6UL: geam6ul: Add SETUP_IOMUX_PADSJagan Teki
Add generic SETUP_IOMUX_PADS function, for imx6ul mux pads. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Use drive strength macrosJagan Teki
Use driver strength macros instead of hex numbers. - IMX6DQ_DRIVE_STRENGTH - 0x30 - IMX6SDL_DRIVE_STRENGTH - 0x28 Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Use proper iomux_ddr_regs drive strength valuesJagan Teki
Usually the drive strength values for DQ and SDL are 0x30 and 0x28 respectively, update them accordingly. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18engicam: Move uart mux init to SPLJagan Teki
Since, u-boot handle fdt through uart so move the UART code to SPL instead make it to global area. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Make SPL to pick suitable fdtJagan Teki
SPL FIT is able to pick the suitable fdt file for u-boot, so add that function through board_fit_config_name_match. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18engicam: Set fdt_file env during run-timeJagan Teki
Set fdt_file env variable during board_late_init Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18geam6ul: Add mmc_late_initJagan Teki
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18geam6ul: Add modeboot env via board_late_initJagan Teki
Add runtime, modeboot env which is setting mmcboot, or nandboot based on the bootdevice so-that conditional macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Add mmc_late_initJagan Teki
Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Add modeboot env via board_late_initJagan Teki
Add runtime, modeboot env which is setting mmcboot, or nandboot based on the bootdevice so-that conditional macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-12-25 01:43:00 +0000