summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-06mpc85xx: add socrates dts from linuxHeiko Schocher
add socrates device tree from linux: commit 71ae5fc87c34 ("Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest") and added SPDX license identifier. Did not fix checkpatch warnings: arch/powerpc/dts/socrates.dts:235: check: Please don't use multiple blank lines arch/powerpc/dts/socrates.dts:238: error: code indent should use tabs where possible Also, add me as board maintainer. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06mpc85xx, socrates: suppress unknown flash warningHeiko Schocher
suppress warning: Flash: ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06pci: add DM based mpc85xx driverHeiko Schocher
add DM based PCI Configuration space access support for MPC85xx PCI Bridge. This driver is based on arch/powerpc/cpu/mpc85xx/pci.c In the old driver there is a fix for a hw issue on the TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I have no such hardware I did not port this part. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-05travis: Rework how we write the ~/.buildman fileTom Rini
With python3 we're now tripping over a long-standing problem with how we add to the buildman file with some toolchains. We cannot have multiple toolchain-alias sections as that leads to a parse error. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-05Merge tag 'fdt-pull-5nov19' of git://git.denx.de/u-boot-fdtTom Rini
Update to latest libfdt and pylibfdt, with added size control Update binman, dtoc, patman, buildman to Python 3 Update move_config, rkmux, microcode_tool to Python 3
2019-11-04binman: Move to use Python 3Simon Glass
Update this tool to use Python 3 to meet the 2020 deadline. Unfortunately this introduces a test failure due to a problem in pylibfdt on Python 3. I will investigate. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04dtoc: Convert fdt.py to Python 3Simon Glass
Drop the now-unused Python 2 code to keep code coverage at 100%. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04binman: Convert a few tests to Python 3Simon Glass
Some tests have crept in with Python 2 strings and constructs. Convert then. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04binman: Remember the pre-reset entry sizeSimon Glass
When preparing to possible expand or contract an entry we reset the size to the original value from the binman device-tree definition, which is often None. This causes binman to forget the original size of the entry. Remember this so that it can be used when needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04pylibfdt: Correct the type for fdt_property_stub()Simon Glass
This function should use a void * type, not char *. This causes an error: TypeError: in method 'fdt_property_stub', argument 3 of type 'char const *' Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04pylibfdt: Sync up with upstreamSimon Glass
Sync up the libfdt Python bindings with upstream, commit: 430419c (tests: fix some python warnings) Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04pylibfdt: Convert to Python 3Simon Glass
Build this swig module with Python 3. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04rkmux: Convert to Python 3Simon Glass
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04move_config: Convert to Python 3Simon Glass
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04microcode_tool: Convert to Python 3Simon Glass
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04test_dtoc: Move to use Python 3Simon Glass
Update this test to use Python 3 to meet the 2020 deadline. Also make it executable while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04test_fdt: Move to use Python 3Simon Glass
Update this test to use Python 3 to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04buildman: Convert to Python 3Simon Glass
Convert buildman to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04patman: Move to use Python 3Simon Glass
Update this tool to use Python 3 to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04patman: Use unicode for file I/OSimon Glass
At present patman test fail in some environments which don't use utf-8 as the default file encoding. Add this explicitly. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04patman: Adjust 'command' to return strings instead of bytesSimon Glass
At present all the 'command' methods return bytes. Most of the time we actually want strings, so change this. We still need to keep the internal representation as bytes since otherwise unicode strings might break over a read() boundary (e.g. 4KB), causing errors. But we can convert the end result to strings. Add a 'binary' parameter to cover the few cases where bytes are needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04fdt: Sync up to the latest libfdtSimon Glass
Bring over the fdt from this commit: 430419c (origin/master) tests: fix some python warnings adding in the 'assumptions' series designed to reduce code size. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04mx6: tbs2910: Minimise libfdt code sizeSimon Glass
This board appears to be very near its size limit and cannot accept the new checking code in libfdt. Disable this code so this the board can continue to build. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04fdt: Add Kconfig options to control code sizeSimon Glass
For better or worse libfdt recent grew a lot of code that checks the validity of the device tree in great detail. When using unsigned or unverified data this makes things safer, but it does add to code size. Add some controls to select the trade-off between safety and code size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-04fdt: Add INT32_MAX to kernel.h for libfdtSimon Glass
Unfortunately libfdt needs this value now, which is present in the stdint.h header. That file is just a placeholder in U-Boot and these sorts of constants appear in the linux/kernel.h header instead. To keep libfdt happy, add INT32_MAX too. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-04Merge tag 'u-boot-imx-20191104' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191104 ------------------- - i.MX NAND: nandbcb support for MX6UL / i.MX7 - i.MX8: support for HAB - Convert to DM (opos6ul, mccmon6) - Toradex i.MX6ull colibri - sync DTS with kernel Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04Merge branch '2019-11-04-ti-imports'Tom Rini
- Various CPSW related improvements, DTS resync
2019-11-04net: ti: cpsw: convert to use dev/ofnode apiGrygorii Strashko
Conver TI CPSW driver to use dev/ofnode api. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [trini: Add <dm/ofnode.h> to provide the prototype to ofnode] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Add support for Intel FSP-S and FSP-T in binman - Correct priority selection for image loaders for SPL - Add a size check for TPL - Various small SPL/TPL bug fixes and changes - SPI: Add support for memory-mapped flash
2019-11-03tbs2910: Disable Plan9/RTEMS bootm supportTom Rini
We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-03imx: nandbcb: add support for writing BCB onlyIgor Opaniuk
Add subcommand for add writing BCB only, where we provide appropriate offsets for firmware1 and firmware2 and size. Example of usage: > nandbcb bcbonly 0x00180000 0x00080000 0x00200000 Writing 1024 bytes to 0x0: randomizing OK Writing 1024 bytes to 0x20000: randomizing OK Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: nandbcb: refactor update functionIgor Opaniuk
Move code for writing FCB/DBBT pages to a separate function Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: nandbcb: add support for i.MX7Igor Opaniuk
Add support for updating FCB/DBBT on i.MX7: - additional new fields in FCB structure - Leverage hardware BCH/randomizer for writing FCB Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03nand: mxs_nand: add API for switching different BCH layoutsIgor Opaniuk
On i.MX7 in a sake of reducing the disturbances caused by a neighboring cells in the FCB page in the NAND chip, a randomizer is enabled when reading the FCB page by ROM bootloader. Add API for setting BCH to specific layout (and restoring it back) used by ROM bootloader to be able to burn it in a proper way to NAND using nandbcb command. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: gpmi: add defines for hw randominizerIgor Opaniuk
Extend GPMI Integrated ECC Control Register Description, include additional defines for enabling randomizer function and providing proper randomizer type. For additional details check i.MX7 APR, section 9.6.6.3 GPMI Integrated ECC Control Register Description (GPMI_ECCCTRLn) Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03tbs2910: Disable Plan9/RTEMS bootm supportTom Rini
We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-11-03imx: support i.MX8QM ROM 7720 a1 boardOliver Graute
Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03arm: dts: imx8mm: sync dts from Linux KernelPeng Fan
Sync dts for i.MX8MM from Linux Kernel 5.4.0-rc1 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03board/BuR/brppt2: initial commitHannes Schmelzer
This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03imx8: output SECO-FW and ATF commit IDsAnatolij Gustschin
Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617) but drop imx-mkimage commit ID reading since we now use in tree mkimage. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03mach-imx: Adding new argument for SIP call interfaceYe Li
Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument. Signed-off-by: Ye Li <ye.li@nxp.com> [agust: fixed imx8m-power-domain build] Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8qxp: mek: add secure boot scriptPeng Fan
Add secure boot script, use ahab to verify image Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8qm: mek: add secure boot scriptPeng Fan
Add secure boot script, use ahab to verify image Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8: Add AHAB secure boot supportPeng Fan
Add function and new command "auth_cntr" for secure boot support. When booting with life cycle set to OEM closed, we need to use this function to authenticate the OS container and load kernel & FDT from OS container to their destination. Also add image authentication call when loading container images. Users can set CONFIG_AHAB_BOOT=y to enable the feature. It is not set at default. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8mm: evk: enable bd71837 pmicPeng Fan
Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for DRAM and linux suspend voltage requirement. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8m: evk: spl: probe clk in spl early stagePeng Fan
We are going to add i2c pmic support before dram could be used. So we need enable clk driver earlier, so use spl_early_init and move clock controller probe eariler to board_init_f. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03power: pmic: Kconfig: add CONFIG_SPL_DM_PMIC_BD71837Peng Fan
Add CONFIG_SPL_DM_PMIC_BD71837 to make this driver could be used in SPL stage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03pmic: bd71837: drop DEBUG macroPeng Fan
Drop DEBUG macro definition which is used for debug purpose. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03dt-bindings: import usb pdPeng Fan
Import usb pd bindings from Linux 5.4.0-rc1. This file will be included by imx8mm-evk.dts. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx: spl: implement spl_boot_mode for i.MX7/8/8MPeng Fan
It will be easy to separate SD/EMMC when booting in SPL stage, then no need to bother which device is BOOT_DEVICE_MMC1/2. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-25 01:03:15 +0000