summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-30armv8/ls1046ardb: RGMII ports require internal delayMadalin Bucur
The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. There is a pull-up that turns on Rx internal delay by default and the u-boot does not override that (yet) so in u-boot the interface is functional. In Linux the PHY driver is clearing the Rx delay for the "rgmii-txid" mode and the reception does not work. Changing the RGMII mode to internal delay here ensures that device tree fix-ups for the PHY connection type turn on both Tx and Rx internal delay in Linux. Fixes: cc1aa218f510 ("armv8/ls1046a: RGMII PHY requires internal delay on Tx") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30armv8/ls1043ardb: RGMII ports require internal delayMadalin Bucur
The correct setting for the RGMII ports on LS1043ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. There is a pull-up that turns on Rx internal delay by default and the u-boot does not override that (yet) so in u-boot the interface is functional. In Linux the PHY driver is clearing the Rx delay for the "rgmii-txid" mode and the reception does not work. Changing the RGMII mode to internal delay here ensures that device tree fix-ups for the PHY connection type turn on both Tx and Rx internal delay in Linux. Fixes: 5a78a472f666 ("armv8/ls1043a: RGMII PHY requires internal delay on Tx") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30net: fman: add support for all RGMII delay modesMadalin Bucur
The RGMII modes that include internal delay were not all properly treated in the memac code. Add support for all RGMII delay modes. Fixes: 111fd19e3b9e ("fm/mEMAC: add mEMAC frame work") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30lx2160a: Add dhcp in boot_targetsMeenakshi Aggarwal
Add dhcp in supported boot_targets for lx2160. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30armv8: ls1028a: add dhcp boot target deviceYuantian Tang
Add DHCP boot target device to enable command bootcmd_dhcp. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30board: ls1028ardb: add BOARD_LATE_INIT configYuantian Tang
Select BOARD_LATE_INIT config so that many board works can be done in late init stage. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30lx2160a : Remove default VID settingMeenakshi Aggarwal
Set VID to 800 mV for Rev1 and set VID as per switch settings for Rev2. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30armv8: ls1028a: Update secure boot headers offsetPriyanka Singh
Update the secure boot headers offsets of Kernel and other firmware images for SD and XSPI boot sources used by esbc_validate command. Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30lx2160a : Add emmc in boot_targets environment variableMeenakshi Aggarwal
Add emmc in supported boot_targets and Add bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30arm64: ls1046a: remove fdt_high environment variableYuantian Tang
Setting fdt_high and initrd_high to 0xffffffffffffffff leads to various difficulty to resolve bugs. Remove them and use bootm_size instead to safely contain a kernel, device tree and initrd for relocation. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30arm64: ls1028a: remove fdt_high environment variableYuantian Tang
Setting fdt_high and initrd_high to 0xffffffffffffffff leads to various difficulty to resolve bugs. Remove them and use bootm_size instead to safely contain a kernel, device tree and initrd for relocation. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30board: fsl: lx2160a: Add GIC LPI memory reserve fixupWasim Khan
Reserve DDR memory region used for GIC LPI configuration table. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30configs: lx2160a: Enable GIC_V3_ITS configWasim Khan
Enable GIC_V3_ITS config to program GIC LPI configuration table. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30board: fsl: lx2160a: Program GIC LPI configuration tableWasim Khan
Program GIC LPI configuration table: 1. Redistributor PROCBASER configuration table (which is common for all redistributors) 2. Redistributor pending table (PENDBASER), for all the available redistributors. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30board: lx2160a: Correct board fixup for PCIe nodesVikas Singh
Update "board_fix_fdt" with correct counter value "i". This will fix the issue while fetching the "reg_names" resource from fdt after fixup. Signed-off-by: Vikas Singh <vikas.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30ls1021a: Set CONFIG_SYS_BOOTMAPSZ to the memory for relocationAlison Wang
This patch sets CONFIG_SYS_BOOTMAPSZ to the amount of memory available to safely contain a kernel, device tree and initrd for relocation. The way to set fdt_high as 0xffffffff to disable device tree relocation is removed. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30ARM: dts: rmobile: Enable IIC3 on V2H BlancheMarek Vasut
Enable IIC3 to permit access to the PMIC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-30ARM: dts: rmobile: Add IIC3 node on Gen2 R8A7792 V2HMarek Vasut
Add IIC3 node from mainline Linux DT. This will be further updated in subsequent DT sync, however adding this node for now is sufficient and minimal change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-30clk: renesas: Switch to fdtdec_get_addr_size_auto_noparent() on Gen2Marek Vasut
The fdtdec_get_addr() does not take into account values set in #address-cells and #size-cells , but assumes them to be 1 for 32bit systems and 2 for 64bit systems. This is true for most DTs, however there are exceptions. Switch to fdtdec_get_addr_size_auto_noparent(), which takes the #address/size-cells values into consideration, otherwise the reset controller node register offset is incorrectly parsed. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-30ARM: rmobile: Convert Gen2 Blanche to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on V2H Blanche. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-28configs: a64-olinuxino-emmc: add eMMC boot part config commandsPetr Štetiar
mmc bootbus and partconf commands are needed in order to be able to configure booting from separate boot0/boot1 eMMC partitions. Signed-off-by: Petr Štetiar <ynezz@true.cz> [jagan: rebase on master] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-28vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.Kristian Amlie
EFI was disabled in f95b8a4b5f64f because of the missing DTB file, and indeed, the DTB file is required to load recent versions of GRUB (2.04) correctly. Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2020-03-28efi_loader: only reserve memory if fdt node enabledHeinrich Schuchardt
Sub-nodes of /reserved-memory may be disabled. In this case we should not reserve memory in the memory map. Reported-by: Patrick DELAUNAY <patrick.delaunay@st.com> Fixes: fef907b2e440 ("efi_loader: create reservations after ft_board_setup") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-03-28cmd: efidebug: fix int to pointer castHeinrich Schuchardt
On 32 bit systems fix warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fixes: a415d61eac26 ("cmd: map addresses to sysmem in efidebug memmap") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-28test/py: UEFI helloworld requires OF_CONTROLHeinrich Schuchardt
With CONFIG_OF_CONTROL environment variable $fdtcontroladdr is not defined and test_efi_helloworld_net() fails. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-27Merge branch '2020-03-27-master-imports'Tom Rini
- Update a few MAINTAINERS entries - cache alignment fix in ext4 code - Two small test fixes
2020-03-27test: typo decompressionHeinrich Schuchardt
%s/decopmression/decompression/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-27MAINTAINERS: add myself as maintainer of fs/btrfsMarek Behún
Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-03-27fs: ext4: Fix alignment of cache buffersJan Kiszka
We need to align the cache buffer to ARCH_DMA_MINALIGN in order to avoid access errors like CACHE: Misaligned operation at range [be0231e0, be0235e0] seen on the MCIMX7SABRE. Fixes: d5aee659f217 ("fs: ext4: cache extent data") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-03-27MAINTAINERS: Add usb.h entry to usbMarek Vasut
Add usb.h file into the USB list. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2020-03-27test/py: mmc: Fix 'mmc info' testcaseHarald Seiler
Commit 41e30dcf8796 ("cmd: mmc: Make Mode: printout consistent") fixed the layout of `mmc info` output. Reflect this change in the respective testcase. Also fix a typo in the documentation. Fixes: 41e30dcf8796 ("cmd: mmc: Make Mode: printout consistent") Signed-off-by: Harald Seiler <hws@denx.de> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-27Revert "vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader."Tom Rini
Currently this causes failures of the platform when running the EFI loader tests, so disable it for now. This reverts commit af827140e5965e5bb2bcad1c53ca8419b428ff6d. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-26Merge tag 'u-boot-rockchip-20200327' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fixed for rv1108 and elgin-rv1108 board - Fix the keyboard from USB instead of CrOS EC
2020-03-26rockchip: mkimage: Use an existing macro instead of a decimal valueMiquel Raynal
Depending on the SoC, a header of four characters is prepended to the image. There is already a macro defining the number of characters: RK_SPL_HDR_SIZE, so use it instead of hardcoding "4". Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rv1108: Fix boot regressionOtavio Salvador
Since commit 79030a486128 ("rockchip: Add Single boot image (with binman, pad_cat)") the following boot regression is seen: U-Boot 2020.04-rc3-00050-gd16e18ca6c-dirty (Mar 09 2020 - 11:40:07 -0300) Model: Elgin RV1108 R1 board DRAM: 128 MiB initcall sequence 67fd12a0 failed at call 6000b927 (err=-22) This happens because the above commit missed to include the "rockchip-u-boot.dtsi" for rv1108, so include this file like it done for other Rockchip SoC dtsi's. Fixes: 79030a486128 ("rockchip: Add Single boot image (with binman, pad_cat)") Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26elgin-rv1108: Avoid adc_channel_single_shot errorOtavio Salvador
Currently the following error message is seen during boot: U-Boot 2020.01-08751-g55759ae141 (Mar 09 2020 - 14:44:52 -0300) Model: Elgin RV1108 R1 board DRAM: 128 MiB APLL: 600000000 DPLL:1200000000 GPLL:1188000000 ACLK_BUS: 148500000 ACLK_PERI:148500000 HCLK_PERI:148500000 PCLK_PERI:74250000 MMC: dwmmc@30110000: 0 Loading Environment from MMC... OK In: serial@10210000 Out: serial@10210000 Err: serial@10210000 Model: Elgin RV1108 R1 board rockchip_dnl_key_pressed: adc_channel_single_shot fail! .... Since the elgin-rv1108 does not use ADC to read the download key status, select CONFIG_ROCKCHIP_BOOT_MODE_REG=0 to avoid such error. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26elgin-rv1108: Use rk_board_late_init() for GPIO settingsOtavio Salvador
Since commit 8e9a8d0d0c8c ("rockchip: elgin-rv1108: use board_early_init_f for per-boar init") the function that configure the board GPIOs is no longer called since CONFIG_BOARD_EARLY_INIT_F=y is not selected. These GPIOs do not need to be configured in such early stagem, so change it to rk_board_late_init() and also select CONFIG_BOARD_LATE_INIT=y to fix the regression. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1Otavio Salvador
In order to make the console pins more robust to noise, activate the pullups and increase its drive strength. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rockchip: Change keyboard input from CrOS EC keyboard to a USB keyboardPeter Robinson
These boards aren't ChromeOS devices so won't have a cros-ec-keyb input as it's the keyboard available via the ChromeOS Embedded Controller. Update them to use a USB keyboard which would actually be available. Also enable the usb keyboard option for those devices that don't have it enabled already. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26rockchip: evb-rv1108: Use syscon API to get grf baseKever Yang
Use syscon API to get grf base instead of get from dts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-26rockchip: elgin-rv1108: Use syscon API to get grf baseKever Yang
Use syscon API to get grf base instead of get from dts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2020-03-23vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.Kristian Amlie
EFI was disabled in f95b8a4b5f64f because of the missing DTB file, and indeed, the DTB file is required to load recent versions of GRUB (2.04) correctly. Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2020-03-23Merge tag 'efi-2020-04-rc4-5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc4 (5) This series contains bug fixes for the UEFI sub-system: * report correct variable length in GetNextVariable() * correct copying direction if freestanding memmove() * remove const for parameter of GetNextVariableName() * correct function descriptions Unit tests are added and adjusted.
2020-03-22efi_loader: definition of GetNextVariableName()Heinrich Schuchardt
'vendor' is both an input and an output parameter. So it cannot be constant. Fixes: 0bda81bfdc5c ("efi_loader: use const efi_guid_t * for variable services") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_selftest: test CalculateCrc32, CopyMem, SetMemHeinrich Schuchardt
Provide unit tests for CalculateCrc32(), CopyMem(), SetMem(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: fix freestanding memmove()Heinrich Schuchardt
For EFI binaries we have to provide an implementation of memmove() in efi_freestanding.c. Before this patch the memmove() function was copying in the wrong direction. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: description efi_convert_pointer()Heinrich Schuchardt
Correct the description of function efi_convert_pointer(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: simplify logical expression in efi_disk_add_dev()Heinrich Schuchardt
To check if a variable is non-zero there is no need for '!= 0'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_selftest: check length reported by GetNextVariableName()Heinrich Schuchardt
GetNextVariableName should report the length of the variable including the final 0x0000 in bytes. Check this in the unit test. Increase the buffer size for variable names. 40 bytes is too short. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_loader: correct reported length in GetNextVariable()Heinrich Schuchardt
The runtime service GetNextVariable() returns the length of the next variable including the closing 0x0000. This length should be in bytes. Comparing the output of EDK2 and U-Boot shows that this is currently not correctly implemented: EDK2: OsIndicationsSupported: 46 PlatformLang: 26 PlatformLangCodes: 36 U-Boot: OsIndicationsSupported: 23 PlatformLang: 13 PlatformLangCodes: 18 Provide correct length in GetNextVariable(). Fixes: d99a87f84b75 ("efi_loader: implement GetNextVariableName()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2024-12-28 14:58:09 +0000