summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-05-24[PATCH][NAND] Define the Vendor Id for Micron NAND FlashUlf Samuelsson
Signed-off-by: Ulf Samuelsson <ulf@atmel.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-16Fix compile problem cause my Microblaze mergeStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-05-16Minor Coding Style cleanup, update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-16Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xxWolfgang Denk
2007-05-16Coding Style Cleanup, new CHANGELOGWolfgang Denk
2007-05-16Merge with /home/wd/git/u-boot/custodian/u-boot-microblazeWolfgang Denk
2007-05-15Merge with /home/wd/git/u-boot/masterWolfgang Denk
2007-05-15Merge with /home/tur/git/u-boot#motionproWolfgang Denk
2007-05-10[Motion-PRO] Add MTD and JFFS2 support, also add default partitionPiotr Kruszynski
definition.
2007-05-08add: reading special purpose registersMichal Simek
2007-05-08add: Microblaze V5 exception handlingMichal Simek
2007-05-08add: FSL control read and writeMichal Simek
2007-05-08[Motion-PRO] Add support for I2C, EEPROM and RTC.Piotr Kruszynski
2007-05-08[Motion-PRO] Add ATA support. Add CF-booting commands to the defaultBartlomiej Sieka
environment.
2007-05-08[Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. ThisBartlomiej Sieka
eliminates networking problems in Linux (timeouts).
2007-05-08[Motion-PRO] Enable Flat Device Tree support and modify default environmentBartlomiej Sieka
to allow booting of FDT-expecting kernels.
2007-05-08Merge git://www.denx.de/git/u-bootMichal Simek
Conflicts: include/asm-microblaze/microblaze_intc.h include/linux/stat.h
2007-05-07new: USE_MSR_INTR supportMichal Simek
2007-05-07[MPC5xxx] There are networking problems on the Motion-PRO board withBartlomiej Sieka
current PHY initalization code (tftp timeouts all the time). This commit temporarily disables PHY initalization sequence to make the networking operational, until a fix is found.
2007-05-07Get rid of duplicated file (see include/configs/sbc8560.h instead)Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-07Get rid of duplicated file (see doc/README.SBC8560 instead)Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-07fix: read and write MSR - repair number of parametersMichal Simek
2007-05-07new: fsl interrupt supportMichal Simek
FSL_Has_data is connected to INTC.
2007-05-07fix: interrupt handlerMichal Simek
remove asm code
2007-05-07fix: remove asm codeMichal Simek
2007-05-07fix: clean interruptMichal Simek
2007-05-07fix: interrupt handler for multiple sourcesMichal Simek
2007-05-07new: add writing to msr registerMichal Simek
2007-05-055xxx: write MAC address to mac-address and local-mac-addressTimur Tabi
Some device trees have a mac-address property, some have local-mac-address, and some have both. To support all of these device trees, ftp_cpu_setup() should write the MAC address to mac-address and local-mac-address, if they exist. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2007-05-05[PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot messageGrzegorz Wianecki
MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up message. Use PVR to distinguish between the two variants, and print proper CPU information. Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-05-05[PATCH] simplify silent consoleLadislav Michl
Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Stefan Roese <sr@denx.de>
2007-05-05[PATCH] Avoid assigning PCI resources from zero addressSergei Shtylyov
If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE core complains and IDE drivers fails to work. Also, assigning zero to a BAR was illegal according to PCI 2.1 (the later revisions seem to have excluded the sentence about "0" being considered an invalid address) -- so, use a reasonable starting value of 0x1000 (that's what the most Linux archs are using). Alternatively, one might have fixed the calls to pci_set_region() individually (some code even seems to have taken care of this issue) but that would have been a lot more work. :-) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Stefan Roese <sr@denx.de>
2007-05-05[patch] setenv(...) can delete environmentalvariablesJeffrey Mann
update setenv() function so that entering a NULL value for the variable's value will delete the environmental variable Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> Acked-by: Stefan Roese <sr@denx.de>
2007-05-05[patch] use unsigned char in smc91111 driver for macMike Frysinger
the v_mac variable in the smc91111 driver is declared as a signed char ... this causes problems when one of the bytes in the MAC is "signed" like 0xE0 because when it gets printed out, you get a display like: 0xFFFFFFE0 and that's no good Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2007-05-05new: FSL and MSR support #2Michal Simek
2007-05-05new: FSL and MSR supportMichal Simek
2007-05-05Coding stylke cleanup; update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-05Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk
2007-05-05Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-05Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk
2007-05-05Make "file" command happy with some config.mk files; update CHANGELOGWolfgang Denk
2007-05-05Merge with /home/wd/git/u-boot/custodian/u-boot-nand-flashWolfgang Denk
2007-05-05Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk
2007-05-05Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-05-05ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHzJeffrey Mann
The AMCC Secquoia board has been changed in a new revision from using a 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD indicates the difference. This patch reads that bit and uses the correct clock speed for the board. This code is backward compatable will all prior boards. All prior boards will be read as 33.000. Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-05ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND bootingStefan Roese
Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big for the 4k NAND boot image so define bus_frequency to 133MHz here which is save for the refresh counter setup. Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-05Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-05-05NAND: Wrong calculation of page number in nand_block_bad()Thomas Knobloch
In case that there is no memory based bad block table available the function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call nand_block_bad() directly. When parameter 'getchip' is set to zero, nand_block_bad() will not right shift the offset to calculate the correct page number. Signed-off-by: Thomas Knobloch <knobloch@siemens.com> Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-04Fix initrd length corruption in bootm command.Wolfgang Denk
When using FDT Images, the length of an inital ramdisk was overwritten (bug introduced by commit 87a449c8, 22 Aug 2006). Patches by Timur Tabi & Johns Daniel. Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-03mpc83xx: fix trivial error in MAKEALLKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
generated by cgit (git 2.34.1) at 2024-12-25 16:47:57 +0000