summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-05net: Kconfig: FEC: Add dependency on i.MX8MPeng Fan
Make FEC driver could be used by i.MX8M when CONFIG_FEC_MXC defined in defconfig. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-11-05arm: dts: imx8mm: drop assigned clocks for clk nodePeng Fan
Drop assigned clocks for clk node, this will break boot on i.MX8MM EVK board. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05clk: imx: imx8mm: add set_parent callbackPeng Fan
Add set_parent callback, then assigned-clock-parents in dts could be work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-11-05clk: imx8mm: add enet clkPeng Fan
Add enet ref/timer/PHY_REF/root clk which are required to make enet function well. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-11-05imx: imx8m: fix boot when CONFIG_$(SPL_)CLK not definedPeng Fan
When CONFIG_$(SPL_)CLK not defined, the clock controller device not exist, so to avoid boot failure for platform not have CONFIG_$(SPL_)CLK, add a check. Reviewed-by: Patrick Wildt <patrick@blueri.se> Tested-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx: add i.MX8MN DDR4 board supportPeng Fan
Support pinctrl/clk/sdhc, include ddr4 timing data. Log: U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) CPU: Freescale i.MX8MNano rev1.0 at 24 MHz Reset cause: POR Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx: add dtsi for i.MX8MNPeng Fan
Add dtsi for i.MX8MN Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8m: add i.MX8MN ddr4 image cfg filePeng Fan
Add cfg file for i.MX8MN DDR4 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05clk: imx: add i.MX8MN ccf driverPeng Fan
Add i.MX8MM ccf driver support. Modifed from Linux Kernel 5.3.0-rc1, drop some entries that not used in U-Boot and adapt to U-Boot CCF style. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Lukasz Majewski <lukma@denx.de>
2019-11-05tools: imx8m_image: support ddr4 firmwarePeng Fan
some boards use ddr4, not lpddr4, so we need to check ddr4 firmware. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05pinctrl: imx8m: support i.MX8MNPeng Fan
Support i.MX8MN in imx8m pinctrl driver Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05tools: imx8mimage: add ROM VERSIONPeng Fan
The IVT offset is changed on i.MX8MN. Use ROM_VERSION to pass the v1 or v2 to mkimage. v1 is for iMX8MQ and iMX8MM v2 is for iMX8M Nano (iMX8MN) Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8mn: add get_boot_devicePeng Fan
No ROM INFO structure on iMX8MN, use new ROM API to get boot device from ROM. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx: cpu: restrict get_boot_devicePeng Fan
i.MX8MN has its own get_boot_device, so restrict with i.MX8MQ and i.MX8MM. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx: add rom api supportPeng Fan
i.MX8MN support loading images with rom api, so we implement reuse board_return_to_bootrom to let ROM loading images. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx: spl: use spl_board_boot_device for i.MX8MNPeng Fan
i.MX8MN follow same logic as i.MX8MM, so use spl_board_boot_device Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8mn: add pin headerPeng Fan
Add pin header for i.MX8MN Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx: add i.MX8MN PE propertyPeng Fan
i.MX8MN does not have LVTTL, it has a PE property Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8mn: set BYPASS ID SWAP to avoid AXI bus errorsPeng Fan
Set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to generated AXI bus errors with TZC380 enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8m: add clk support for i.MX8MNPeng Fan
i.MX8MN has similar architecture with i.MX8MM, so it could reuse the clock code of i.MX8MM, but i.MX8MN has different CCM root configurations, so need a separate root entry. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8mn: support get_cpu_revPeng Fan
Add a dummy cpu type and support get_cpu_rev for i.MX8MN Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx: add i.MX8MN kconfig entryPeng Fan
Add i.MX8MN kconfig entry Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05power: domain: add i.MX8 scu power domain driverPeng Fan
The power domain tree is not accepted by Linux Kernel upstream. only a single pd node is used currently, as following: pd: imx8qx-pd { compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; }; So to migrate to use upstream linux dts, we also need a driver to support this. This patch is to support the new method, compared with legacy power domain tree, it will be simpiler, because each device will has resource id as power domain index, it will be directly passed to scfw, and no need to let power domain build that tree. If multiple power domain is needed, it is the dts node should has correctly power domains entry added and sequence correct. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05power: domain: make imx8-power-domain.c legacyPeng Fan
The current i.MX8 power domain driver is based on i.MX vendor power domain tree which will retire later. The Linux upstream use a single pd node for power domain driver, and U-Boot will adopt that. When U-Boot i.MX8 dts synced with Linux Kernel upstream and related driver ready, the legacy driver will be removed. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05misc: imx8: scu: simplify code to make it extendablePeng Fan
clk and pinctrl will be get(probed) during each device probe, we don't need to probe them in scu driver. Only need to bind the sub-nodes (clk and iomuxc) of MU node with their drivers. So drop the code to probe the clk/pinctrl, and this patch will make it easy to add more subnodes. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05arm: dts: imx8qm-mek: add u-boot, dm-spl for lpuart0Peng Fan
lpuart0 is the uart used by SPL and U-Boot proper, and DM_SERIAL is enabled. Since uclass power domain is also enabled, to make lpuart work properly, need add u-boot,dm-spl for lpuart power domain and its parent. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05arm: dts: imx8qxp-mek: add u-boot, dm-spl for lpuart0Peng Fan
lpuart0 is the uart used by SPL and U-Boot proper, and DM_SERIAL is enabled. Since uclass power domain is also enabled, to make lpuart work properly, need add u-boot,dm-spl for lpuart power domain and its parent. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8qm: mek: enable dm-spl for pmPeng Fan
with u-boot,dm-spl added for imx8qm-pm node, and SPL_SIMPLE_BUS enabled, the bind and probe code in board file could be removed. Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-04Merge tag 'u-boot-imx-20191104' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191104 ------------------- - i.MX NAND: nandbcb support for MX6UL / i.MX7 - i.MX8: support for HAB - Convert to DM (opos6ul, mccmon6) - Toradex i.MX6ull colibri - sync DTS with kernel Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04Merge branch '2019-11-04-ti-imports'Tom Rini
- Various CPSW related improvements, DTS resync
2019-11-04net: ti: cpsw: convert to use dev/ofnode apiGrygorii Strashko
Conver TI CPSW driver to use dev/ofnode api. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [trini: Add <dm/ofnode.h> to provide the prototype to ofnode] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Add support for Intel FSP-S and FSP-T in binman - Correct priority selection for image loaders for SPL - Add a size check for TPL - Various small SPL/TPL bug fixes and changes - SPI: Add support for memory-mapped flash
2019-11-03tbs2910: Disable Plan9/RTEMS bootm supportTom Rini
We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-03imx: nandbcb: add support for writing BCB onlyIgor Opaniuk
Add subcommand for add writing BCB only, where we provide appropriate offsets for firmware1 and firmware2 and size. Example of usage: > nandbcb bcbonly 0x00180000 0x00080000 0x00200000 Writing 1024 bytes to 0x0: randomizing OK Writing 1024 bytes to 0x20000: randomizing OK Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: nandbcb: refactor update functionIgor Opaniuk
Move code for writing FCB/DBBT pages to a separate function Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: nandbcb: add support for i.MX7Igor Opaniuk
Add support for updating FCB/DBBT on i.MX7: - additional new fields in FCB structure - Leverage hardware BCH/randomizer for writing FCB Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03nand: mxs_nand: add API for switching different BCH layoutsIgor Opaniuk
On i.MX7 in a sake of reducing the disturbances caused by a neighboring cells in the FCB page in the NAND chip, a randomizer is enabled when reading the FCB page by ROM bootloader. Add API for setting BCH to specific layout (and restoring it back) used by ROM bootloader to be able to burn it in a proper way to NAND using nandbcb command. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: gpmi: add defines for hw randominizerIgor Opaniuk
Extend GPMI Integrated ECC Control Register Description, include additional defines for enabling randomizer function and providing proper randomizer type. For additional details check i.MX7 APR, section 9.6.6.3 GPMI Integrated ECC Control Register Description (GPMI_ECCCTRLn) Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03tbs2910: Disable Plan9/RTEMS bootm supportTom Rini
We have once again reached a point where this board does not build in some cases with supported toolchains due to reaching a size constraint. To regain some space, disable support for Plan 9 / RTEMS images with the bootm command. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-11-03imx: support i.MX8QM ROM 7720 a1 boardOliver Graute
Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03arm: dts: imx8mm: sync dts from Linux KernelPeng Fan
Sync dts for i.MX8MM from Linux Kernel 5.4.0-rc1 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03board/BuR/brppt2: initial commitHannes Schmelzer
This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03imx8: output SECO-FW and ATF commit IDsAnatolij Gustschin
Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617) but drop imx-mkimage commit ID reading since we now use in tree mkimage. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03mach-imx: Adding new argument for SIP call interfaceYe Li
Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument. Signed-off-by: Ye Li <ye.li@nxp.com> [agust: fixed imx8m-power-domain build] Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8qxp: mek: add secure boot scriptPeng Fan
Add secure boot script, use ahab to verify image Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8qm: mek: add secure boot scriptPeng Fan
Add secure boot script, use ahab to verify image Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8: Add AHAB secure boot supportPeng Fan
Add function and new command "auth_cntr" for secure boot support. When booting with life cycle set to OEM closed, we need to use this function to authenticate the OS container and load kernel & FDT from OS container to their destination. Also add image authentication call when loading container images. Users can set CONFIG_AHAB_BOOT=y to enable the feature. It is not set at default. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8mm: evk: enable bd71837 pmicPeng Fan
Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for DRAM and linux suspend voltage requirement. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8m: evk: spl: probe clk in spl early stagePeng Fan
We are going to add i2c pmic support before dram could be used. So we need enable clk driver earlier, so use spl_early_init and move clock controller probe eariler to board_init_f. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03power: pmic: Kconfig: add CONFIG_SPL_DM_PMIC_BD71837Peng Fan
Add CONFIG_SPL_DM_PMIC_BD71837 to make this driver could be used in SPL stage Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-28 13:39:49 +0000