summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-19MAINTAINERS: Update u-boot-marvell entryStefan Roese
This patch does the following changes to the u-boot-marvell maintainers entry: - Add Armada-7k/8k to the list - Remove Prafulla and Luka since they have been silent on the list for a long time. Please speak up, if you would like to continue or better start maintaining. - Add multiple Marvell / MVEBU related driver directories and files Signed-off-by: Stefan Roese <sr@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tom Rini <trini@konsulko.com> Acked-by: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19configs/clearfog_gt_8k: add network interface supportBaruch Siach
Enable the mvpp2 network driver for the Armada 8K SoC. Enable the Marvell PHY driver for the on-board 1512 PHY. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19pci: pci_mvebu: Add comment about missing of_n_addr_cells() callStefan Roese
This patch adds a comment to explain the use of the hardcoded value for the number of address cells in mvebu_get_tgt_attr(). This should help to rework this function, once CONFIG_OF_LIVE is enabled for MVEBU in general. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-18Prepare v2019.04-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-16arm: socfpga: make SPL_TEXT_BASE overridableSimon Goldschmidt
To boot from fpga on socfpga gen5, we need to set CONFIG_SPL_TEXT_BASE to 0xC0000000 (hps2fpgaslaves base address). Since converting CONFIG_SPL_TEXT_BASE to Kconfig hasn't been successful so far, let's make this value overridable in socfpga_common.h, so that we can have different board configs override this in socfpga_common.h. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-03-16ARM: dts: socfpga: Add missing altr,sysmgr-syscon for EMACLey Foon Tan
Syscon register is required in dts to select correct PHY interface. Fix error below: Net: Failed to get syscon: -2 Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-03-16fastboot: common: fix default fastboot_boot on 64-bitNeil Armstrong
When booting on a 64-bit system, the boot_addr_start buffer is not large enough to contain a 64-bit number, thus leading to a crash even if fastboot_buf_addr is valid, only the high part of the address will be printed to boot_addr_start : fastboot with fastboot_buf_addr = 0x0000000006000000: downloading of 92239872 bytes finished Booting kernel at 0x00000000... "Synchronous Abort" handler, esr 0x96000004 elr: 00000000010561f4 lr : 0000000001056fac (reloc) <snip> x28: 000000007df2d38f x29: 000000007df2d1b0 Resetting CPU ... With this fix, boot_addr_start can have the full 64-bit address passed to bootm. Fixes: f73a7df984a9 ("net: fastboot: Merge AOSP UDP fastboot") Cc: Simon Glass <sjg@chromium.org> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-16usb: udc-uclass: Fixed problem when no alias is defined in DTJean-Jacques Hiblot
commit 801f1fa442 "dm: usb: udc: Use SEQ_ALIAS to index the USB gadget ports" changed the way the udevice if found. It uses the alias to find a udevice for a given USB port number. In the commit log it was stated that if no alias is provided, the bind order will be used instead. However it doesn't work. Fixing this by adding a call to uclass_get_device() if uclass_get_device_by_seq() fails. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: Vignesh R <vigneshr@ti.com>
2019-03-16cmd: fastboot: handle watchdog while waiting for fastboot commands.Sean Nyekjaer
Watchdog is not handled while waiting for fastboot commands. Tested on a i.MX6 ULL EVK board. Signed-off-by: Sean Nyekjaer <sean@geanix.com>
2019-03-15Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
- DPAA2 fixes and DDR errata workaround for LS1021A
2019-03-15Merge tag 'efi-2019-04-rc4-3' of https://github.com/xypron2/u-bootTom Rini
Pull request for UEFI system for v2019.04-rc4 Fix an error with the serial communication on boards with a very small UART buffer which leads to a stalled system. Provide an X86 reset driver for the UEFI runtime. Fix a problem with parallel builds.
2019-03-15armv7: ls102xa: Add workaround for DDR erratum A-008850Alison Wang
Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offsetPramod Kumar
Fix EC1 and EC2 read from correct offset 26, instead of 25 Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15board: fsl: lx2160aqds: modify the phy fixup codePankaj Bansal
Now that we are representing the MDIO mux in LX2160AQDS board in producer/consumer terms, the consumer nodes' has been changed. Therefore, modify the device tree fixups according to change in device tree. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15mc : Reduce MC memory size to 128MMeenakshi Aggarwal
ls2088, ls1088 : minimum MC Memory size is 128 MB lx2 : minimum MC memory size is 256 MB Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15driver: net: fsl-mc: Fix DPC MAC address fixupIoana Ciocoi Radulescu
If node /board_info/ports does not exist in the DPC file, function mc_fixup_dpc() will skip not only MAC address fixup, but also the cache flush at the end. This may cause the other fixup changes (e.g. ICID related ones) to be ignored by MC. Fixes: 1161dbcc0a36 ("drivers: net: fsl-mc: Include MAC addr fixup to DPL") Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15drivers: net: ldpaa_eth: check if the dpmac is enabledPankaj Bansal
some dpmacs in armv8a based freescale layerscape SOCs can be configured via both serdes(sgmii, xfi, xlaui etc) bits and via EC*_PMUX(rgmii) bits in RCW. e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits Now if a dpmac is enabled by serdes bits then it takes precedence over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII, then the dpmac is SGMII and not RGMII. Therefore, in fsl_rgmii_init function of SOC, we will check if the dpmac is enabled or not? if it is (fsl_serdes_init has already enabled the dpmac), then don't enable it. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-14efi_loader: fix build error for freestanding.oHeinrich Schuchardt
Since commit f51a226436a87 ("efi_loader: provide freestanding library") in parallel builds errors lib/efi_selftest/../efi_loader/efi_freestanding.o: file not recognized: File truncated occur. Obviously make cannot correctly sequence parallel builds with a dependency like ../efi_loader/efi_freestanding.o. Fixes: f51a226436a87 ("efi_loader: provide freestanding library") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-14board: tbs2910: Fix default environmentSoeren Moch
Especially fix usb keyboard support. Other changes are only for beautification. Signed-off-by: Soeren Moch <smoch@web.de>
2019-03-14Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2019-03-14MAINTAINERS: Remove unsupported statuses - Odd Fixes and ObsoleteKrzysztof Kozlowski
The MAINTAINERS file was copied from Linux Kernel along with all its statuses of maintainership. However tools/genboardscfg.py accepts only Maintained, Supported and Orphan. Remove then the Odd Fixes and Obsolete from MAINTAINERS file to avoid confusion. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-03-14arndale: fix unknown statusMinkyu Kang
set status to Maintained Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org>
2019-03-13Revert "env: add spi_flash_read_env function"Heiko Schocher
This reverts commit 9a9d66f5eff0f443de4c2c6ca3e27771ed14b1b4. because it breaks fw_setenv and U-Boot interworking, if U-Boot environment is stored in a SPI-NOR. Reproduce it with: boot linux with empty Environment and store a variable with fw_setenv into it, the Environment is now filled with 0xff: root@ckey5e:10:8e:~# hexdump -C /dev/mtd4 00000000 e9 e8 07 fa 01 62 6f 6f 74 63 6d 64 3d 72 75 6e |.....bootcmd=run| [...] 00000f30 7d 00 75 62 69 62 6f 6f 74 76 6f 6c 3d 32 00 00 |}.ubibootvol=2..| 00000f40 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| Boot now U-Boot prints: Loading Environment from SPI Flash... SF: Detected s25fl128l with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment Reason is the above commit, as it only reads until \0\0 is found, and assumes the rest of the Environment space is filled with 0x00, which is not the case when saving an Environment under linux with fw_setenv. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2019-03-13Merge tag 'u-boot-imx-20190313' of git://git.denx.de/u-boot-imxTom Rini
Small fixes in several i.MX boards ---------------------------------- - imx8: add pinctrl driveri (mx8m), fix documentation and fix reported CPU frequency. Fabio is co-maintainer - pico-imx6ul: switch to DM - local fixes for ventana, mx6ul_14x14_evk, engicam, imx6(q)_logic, liteboard
2019-03-13drivers/net/fec: phy_init: remove redundant logicHannes Schmelzer
The phy_connect_dev(...) function from phy.c does all the handling (inclusive catching fixed-link). So we drop here the single steps and call just phy_connect_dev(...). Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-13MTD: mxs_nand_spl: Redo the way nand_init initializesAdam Ford
Currently the spl system calls nand_init which does nothing. It isn't until an attempt to load from NAND that it gets initialized. Subsequent attempts to load just skip the initialization because NAND is already initialized. This moves the contents of mxs_nand_init to nand_init. In the event of an error, it clears the number of nand chips found. Any attempts to use nand will check if there are nand chips available instead of actually doing the initialization at that time. If there are none, it will return an error to the higher level calls. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13arm: dts: imx6qdl-u-boot: Enable spba-bus@2000000 simple busAdam Ford
spba-bus has a few nodes under it including the UART1 and some ESPI buses. In order to use them in SPL, the u-boot,dm-spl flag needs to be added to the spba-bus@2000000 container. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdefAdam Ford
Kconfig allows boards to configured with DM_SERIAL and still have SPL_DM_SERIAL disabled. This patch changes the ifdef's to CONFIG_IS_ENABLED to allow the modes to differ between SPL and U-Boot. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-13ARM: imx6q_logic: Enable MTD and NAND_MXS_DTAdam Ford
This patch supports enabling MTD, and the corresponding CMD_MTD along with enabling the MXS NAND Controller with device tree support. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13ARM: imx6_logic: Fix typo in FDT addressAdam Ford
A few scripts reference 'fdt_addr' when they should reference 'fdt_addr_r' so this patch fixes those broken references. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13include: configs: imx6-engicam: Add recovery boot optionShyam Saini
Combined with watchdog board reset mechanism, this can be used as recovery boot option after bootlimit exceeds the configured value. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13configs: imx6qdl_icore_mmc: Enable watchdog and bootcounterShyam Saini
Enable watchdog and bootcounter support on imx6qdl board Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13board: engicam: Add watchdog support on EngicamShyam Saini
This patch adds watchdog support for engicam imx6 family of boards. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13imx8qxp: Fix the reported CPU frequencyFabio Estevam
Currently the CPU frequency is incorrectly reported: CPU: NXP i.MX8QXP RevB A35 at 147228 MHz Fix this problem by using a direct call to the SCU firmware to retrieve the Cortex A35 CPU frequency. With this change applied the CPU frequency is displayed correctly: CPU: NXP i.MX8QXP RevB A35 at 1200 MHz Tested-by: Marcelo Macedo <marcelo.macedo@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com>
2019-03-13imx8mq_evk: Add myself as a co-maintainerFabio Estevam
I would like to help maintaining this board. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-03-13imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to KconfigFabio Estevam
Currently the command "saveenv" is not available. The CONFIG_ENV_IS_IN_MMC symbol has been converted to Kconfig, so fix the problem by moving it to the defconfig. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13mx6sabreauto: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-03-13mx6sabresd: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-03-13imx: mx6qsabrelite: Update the SabreLite READMEMartyn Welch
The information in the SabreLite README is inaccurate and sparse. The upstream U-Boot can boot the SabreLite from SPI-NOR. Additionally, the freely available imx_loader tool can be easily used to boot a board with a corrupted SPI, the official Freescale/NXP manufacturing tools are not required. Reformat the document, adding a description of how to boot from SPI-NOR and adding a brief description of how to recover the board should the SPI-NOR be corrupted using imx_loader. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-03-13imx8mq_evk/README: fix DDR training firmware pathBaruch Siach
Remove a redundant directory level. Reported-by: Ofer Heifetz <ofer.heifetz@valens.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13imx8mq_evk/README: add missing firmware extract stepBaruch Siach
Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13warp7: Fix the write to the LDOGCTL PMIC registerFabio Estevam
The third parameter of the pmic_clrsetbits() function is the mask to the register and the correct mask is 1 not 0. Since the LDOGCTL only contains a single valid bit (bit 0), we can use pmic_reg_write() and write 1 directly, which fixes the problem in a simpler way and use the original pmic function that was used prior to the DM PMIC conversion. Fixes: 8ba377321c86 ("arm: imx7s-warp: Convert to DM PMIC") Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-03-13mx6ul_14x14_evk: Simplify the PMIC register writesFabio Estevam
There is no need to store the values written to the PMIC inside the 'reg' variable. Make it simpler by writing the values directly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13warp7: Remove unneeded headers after DM conversionFabio Estevam
After DM conversion the I2C and MMC related board codes have been removed, so remove the corresponding header files as well. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-03-13warp7: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2019-03-13imx: ventana: added support for 16bit 8Gb density (1GiB) DRAMTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-03-13imx: ventana: hexdump invalid EEPROM dataTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-03-13ARM: liteboard: use random ethaddrMarcin Niestroj
There is no ethaddr assigned to each board, so we need to use random value in order to use network. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-03-13ARM: liteboard: move towards driver model and device-tree bootMarcin Niestroj
This patch mostly enables DM drivers in board defconfig and all their dependencies. Additionally we remove USB code that is on longer executed after enabling CONFIG_DM_USB. Enable CONFIG_PINCTRL, so we can get rid of ethernet pin configuration. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-03-13pico-imx6ul: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit (git 2.34.1) at 2024-12-26 07:49:40 +0000