summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-22nds32: Support AG101P serial DM.rick
Support AG101P serial device tree flow. Signed-off-by: rick <rick@andestech.com>
2017-05-18Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2017-05-18Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2017-05-18Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2017-05-18ARM: dts: am335x-evm: disable mmc3Jean-Jacques Hiblot
SDIO is not supported in u-boot, there is no point in enabling mmc3. For this purpose, add u-boot specific dtsi that this will be included automatically while building the dtb. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-18scripts/Makefile.lib: Always have ...-u-boot.dtsi be able to overrideTom Rini
The intention of having a -u-boot.dtsi file is to be able to make changes to the provided upstream dts files as well as to be able to add nodes. Change the logic for adding the file from making it the last included file at the top of the dts to being included at the end of the file. Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-18Merge branch 'master' of git://git.denx.de/u-boot-imxStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-05-18arm: socfpga: Enable build for Arria 10Ley Foon Tan
Update Kconfig and Makefile to enable Arria 10. Clean up Makefile and sorting *.o alphanumerically. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add board files for the Arria10Ley Foon Tan
Add support for the Arria10 SoCDK. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add config and defconfig for Arria 10Ley Foon Tan
Add config and defconfig for the Arria10 and update socfpga_common.h. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add SPL support for Arria 10Ley Foon Tan
Add SPL support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: dts: Add dts and dtsi for Arria 10Ley Foon Tan
Device tree files for Arria 10 Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add misc support for Arria 10Ley Foon Tan
Add misc support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add pinmux for Arria 10Ley Foon Tan
Add pinmux support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add sdram header file for Arria 10Ley Foon Tan
Add sdram header file for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add system manager for Arria 10Ley Foon Tan
Add system manager register struct and macros for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add clock driver for Arria 10Ley Foon Tan
Add clock driver support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add reset driver support for Arria 10Ley Foon Tan
Add reset driver support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Add A10 macrosLey Foon Tan
Add i2c, timer and other A10 macros. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure misc driverLey Foon Tan
Restructure misc driver in the preparation to support A10. Move the Gen5 specific code to gen5 file. Change all uint32_t_to u32. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure system managerLey Foon Tan
Restructure system manager in the preparation to support A10. No functional change. Change uint32_t to u32. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure reset manager driverLey Foon Tan
Restructure reset manager driver in the preparation to support A10. Move the Gen5 specific code to gen5 files. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18arm: socfpga: Restructure clock manager driverLey Foon Tan
Restructure clock manager driver in the preparation to support A10. Move the Gen5 specific code to _gen5 files. - Change all uint32_t to u32 and change to use macro BIT(n) for bit shift. - Check return value from wait_for_bit(). So change return type to int for cm_write_with_phase() and cm_basic_init(). Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18usb: lpc32xx: add i2c DM supportLiam Beguin
Add DM support for i2c functions. Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-18pinctrl: imx: fix memory leakPeng Fan
Each time set_state is called, a new piece memory will be allocated for pin_data, but not freed, this will incur memory leak. When error, the devm API could not free memory automatically. So need call devm_kfree when error. Issue reported by Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: fix secure config after switching to DMStefano Babic
mx7dsabresd_secure_defconfig was not updated after moving to DM. Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: switch to DM USBPeng Fan
Switch to use DM USB. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2017-05-18imx: mx7dsabresd: reset ENET_RST_BPeng Fan
Reset ENET_RST_B to make ENET function stable. Since DM_GPIO enabled, we use "gpio_spi@0_5" which corresponds to ENET_RST_B. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18imx: mx7dsabresd: enable more DM driversPeng Fan
Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. The 74x164 drivers needs SOFT_SPI and DM_GPIO enabled. So needs to enable them together. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18gpio: 74x164: make oe-pins optionalPeng Fan
Make oe-pins optional because some boards have fixed it to enable. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-18spi: kconfig: add soft spi Kconfig entryPeng Fan
Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the SPI signals. We use it for accessing 74x164 on some i.MX boards. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add usdhc supportPeng Fan
Add usdhc support Signed-off-by: Peng Fan <peng.fan@nxp.com>
2017-05-18arm: dts: imx7d-sdb: add i2c supportPeng Fan
Add i2c support. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add regulator node for usb and mmcPeng Fan
Add regulator node for usb and mmc. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb: add spi gpio nodePeng Fan
Add spi gpio node for 74LV595. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7d-sdb add basic dtsPeng Fan
Add basic dts for i.MX7D-SDB board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-05-18arm: dts: imx7: sync with LinuxPeng Fan
Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'"). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-05-18imx: ventana: update imx wdog external reset dt propertyTim Harvey
Early backports of the imx wdog external reset feature occured before the property was accepted upstream and used 'ext-reset-output' instead of 'fsl,ext-reset-output'. In order to support older kernels remove both properties. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-05-18imx: ventana: fix GW520x external watchdog dt updateTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-05-18mx6sabresd: Remove non-SPL targetsFabio Estevam
Now that mx6sabresd_spl_defconfig can be used to boot all mx6sabresd variants, the non-SPL targets can be safely removed. Signed-off-by: Fabio Estevam <fabio.estvam@nxp.com>
2017-05-18mx6sabresd: Add SPL support for the mx6dl variantFabio Estevam
Add support for the mx6dlsabresd board in SPL. Retrieved the DCD table from: board/freescale/mx6sabresd/mx6dlsabresd.cfg (NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga) Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabresd boards. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-18mx6sabresd: Prepare for supporting MX6DLFabio Estevam
Currently only MX6Q/QP sabresd boards are supported in SPL. In order to also support MX6DL we need to convert to using IOMUX_PADS and SETUP_IOMUX_PADS macros. Other than that move the <asm/arch/mx6-ddr.h> header inclusion to the SPL code block in order to avoid build error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-18engicam: common: Move board_late_initJagan Teki
Move board_late_init into common area from supported boards. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18engicam: common: Move common board codeJagan Teki
Move possible common board code into common area from supported boards. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18geam6/isiot: Move the spl code commonJagan Teki
SPL code for geam6 and isiot are same, so move them in common area. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6[_rqs]: Move the spl code commonJagan Teki
SPL code for icorem6 and icorem6_rqs are same, so move them in common area. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18i.MX6UL: isiot: Add SETUP_IOMUX_PADSJagan Teki
Add generic SETUP_IOMUX_PADS function, for imx6ul mux pads and use them in Is.IoT board. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18isiot: Fix to use usdhc2_pads for mmc2Jagan Teki
mmc2 in Is.IoT using usdhc1_pads instead usdhc2_pads, so update the same. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18i.MX6UL: geam6ul: Add SETUP_IOMUX_PADSJagan Teki
Add generic SETUP_IOMUX_PADS function, for imx6ul mux pads. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-05-18icorem6: Use drive strength macrosJagan Teki
Use driver strength macros instead of hex numbers. - IMX6DQ_DRIVE_STRENGTH - 0x30 - IMX6SDL_DRIVE_STRENGTH - 0x28 Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-12-28 17:24:05 +0000