summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-09test/py: don't use mmc_rd config for other mmc testsStephen Warren
Fix test_mmc_dev(), test_mmc_rescan(), test_mmc_info() not to use the same configuration data that test_mmc_rd() does. Doing so causes the following issues: * The new code uncondtionally expects certain keys to exist in the configuration data. These keys do not exist in existing configuration data since they were not previously required, and there was no notification re: a requirement to add these new keys. This causes test failures due to thrown exceptions when accessing the non-existent keys. * The new tests logically operate on different objects. test_mmc_rd() operates on ranges of sectors on an MMC device (which may be the entire set of sectors of a device, or a part of a device), whereas all the new tests operate solely on entire devices. These are separate things, and it's entirely likely that the user will wish to runs the two types of tests on different sets of data; see the example configuration data that this commit adds. Ideally, the new tests would have been added to a separate Python file, since they aren' closely related to the existing tests. FIXME: Marek, can you please replace the "???" in this patch with some reasonable looking data? Thanks. Cc: Marek Vasut <marek.vasut@gmail.com> Fixes: 4ffec8cdf512 ("test/py: mmc: Add 'mmc info' test") Fixes: ce4b2cafa79c ("test/py: mmc: Add 'mmc rescan' test") Fixes: 86dfd152c917 ("test/py: mmc: Add 'mmc dev' test") Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-05-09fdt_shrink_to_minimum: do not mark fdt space reserved unconditionallySimon Goldschmidt
This function merely relocates the fdt blob, so don't let it alter it by adding reservations that didn't exist before. Instead, if the memory used for the fdt blob has been reserved before calling this function, ensure the relocated memory is marked as reserved instead. Reported-by: Keerthy <j-keerthy@ti.com> Reported-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-09Make FIT support really optionalFabrice Fontaine
Due to some mistakes in the source code, it was not possible to really turn FIT support off. This commit fixes the problem by means of the following changes: - Enclose "bootm_host_load_image" and "bootm_host_load_images" between checks for CONFIG_FIT_SIGNATURE, in common/bootm.c. - Enclose the declaration of "bootm_host_load_images" between checks for CONFIG_FIT_SIGNATURE, in common/bootm.h. - Condition the compilation and linking of fit_common.o fit_image.o image-host.o common/image-fit.o to CONFIG_FIT=y, in tools/Makefile. Signed-off-by: Carlos Santos <casantos@datacom.ind.br> [fabio: adapt for 2016.07] Signed-off-by: Fabio Estevam <festevam@gmail.com> [Ricardo: fix conditional compilation and linking of the files mentioned above for 2016.07] Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com> [Jörg: adapt for 2019.01] Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> [Retrieved from: https://git.buildroot.net/buildroot/tree/package/uboot-tools/0003-Make-FIT-support-really-optional.patch] Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
2019-05-09Fix spelling of available.Vagrant Cascadian
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
2019-05-09env: spi: Fix incorrect entry descriptionMarek Vasut
Fix the max frequency entry description, it's incorrect. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Rini <trini@konsulko.com>
2019-05-09test/py: avb: fix test_avb_persistent_values failIgor Opaniuk
Fix test_avb_persistent_values() pytest, which was failing because of wrong size value provided from tee sandbox driver. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-05-09ata: ahci: fix memory leakChristian Gmeiner
malloc(..) and memalign(..) are both allocating memory and as a result we leak the memory allocated with malloc(..). Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-09usb: ohci: ohci-da8xx: Cleanup Error handling and fix flagsAdam Ford
Per feedback from Marek, he suggested better handling and to enable DM_FLAG_OS_PREPARE, this patch re-orders some of the error checking, and errors returns the error code right away and also sets DM_FLAG_OS_PREPARE. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-09dm: MIGRATION: Add migration plan for WDT (DM watchdog support)Stefan Roese
As much of the watchdog system has been migrated to DM now, formalize a deadline for migration. Please note that the old CONFIG_HW_WATCHDOG macro should be removed completely at some point. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2019-05-09Merge tag 'rockchip-for-v2019.07-rc1' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements and new features: - split more rockchip pinctrl_core feature into per SoC - enable TPL for evb-rk3399 board - enable TPL/SPL for evb-px5 board - enable TPL and OP-TEE support for evb-rk3229 - update fix in arm common assembly start code for rockchip header file - update default SPL_FIT_GENERATOR for rockchip - rk3399 boards update to use '-u-boot.dtsi' - add new rk3399 boards: Nanopi M4, Nanopc T4 - enable sound for chromebook_minnie
2019-05-09Merge git://git.denx.de/u-boot-marvellTom Rini
- DM updates for multiple MVEBU boards (Stefan) - Add CRS305-1G-4S board (Luka) - Enable MMC in SPL on clearfog (Baruch)
2019-05-09Merge git://git.denx.de/u-boot-riscvTom Rini
- Correct SYS_TEXT_BASE for qemu. - Support booti. - Increase SYSBOOTM_LEN for Fedora/RISCV kernel. - Support SMP booting from flash.
2019-05-09Merge tag 'u-boot-amlogic-20190509' of git://git.denx.de/u-boot-amlogicTom Rini
- Add USB PHY drivers for Amlogic G12A - Add USB Complex Glue driver for Amlogic G12A - Add USB Gadget support for Amlogic G12A
2019-05-09doc: rockchip: Add global doc for rk3399 build/flashJagan Teki
Since rockchip have an individual doc/README.rockchip, it would be better to update the same instead of maintaining it separately in board files. So, add the documentation for rk3399 - procedure to build for Rockchip miniloader and U-Boot SPL options - procedure to boot from SD for Rockchip miniloader and U-Boot SPL options - procedure to build ATF, PMU M0 firmware for puma boards - add boot logs of each option, so-that it would help for future boards porting Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-09rockchip: rk3399: Add Nanopc T4 board supportJagan Teki
Add initial support for Nanopc T4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - 16GB eMMC - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 12V/2A Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Add NanoPC-T4 IR receiver" (sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3) Tested-by: Daniel Gröber <dxld@darkboxed.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-09rockchip: rk3399: Add Nanopi M4 board supportJagan Teki
Add initial support for Nanopi M4 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR3-1866 - SD card slot - eMMC socket - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, DP, MIPI DSI/CSI - USB 3.0 x4 - USB Type C power and data - GPIO1, GPIO2 expansion ports - DC5V/3A Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: Refine nanopi4 differences" (sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-09rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1Jagan Teki
Attaching GPIO functionality to SDMMC0_DET pin (which does in Linux base dts) make dwmmc driver "fail to detect the card". Card did not respond to voltage select! It may be because the existing driver can't support gpio card detection. So, change the pinctrl functionality from RK_FUNC_GPIO to RK_FUNC_1 like other rk3399 dts does via sdmmc_cd pin. Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-09RISCV: image: Add booti supportAtish Patra
This patch adds booti support for RISC-V Linux kernel. The existing bootm method will also continue to work as it is. It depends on the following kernel patch which adds the header to the flat Image. Gzip compressed Image (Image.gz) support is not enabled with this patch. https://patchwork.kernel.org/patch/10925543/ Tested on HiFive Unleashed and QEMU. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Karsten Merker <merker@debian.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2019-05-09riscv: configs: AE350 will use CONFIG_OF_SEPARATE when boots from flashRick Chen
When AE350 boots from flash, use CONFIG_OF_SEPARATE instead of CONFIG_OF_BOARD. Also remove unused code about prior_stage_fdt_address. And modify CONFIG_SYS_FDT_BASE as flash address. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-09riscv: configs: AE350 will use CONFIG_OF_PRIOR_STAGE when boots from ramRick Chen
When AE350 boots from ram, use CONFIG_OF_PRIOR_STAGE instead of CONFIG_OF_BOARD. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-09riscv: prior_stage_fdt_address should only be used when OF_PRIOR_STAGE is ↵Rick Chen
enabled This patch will fix prior_stage_fdt_address write failure problem, when AE350 boots from flash. When AE350 boots from flash, prior_stage_fdt_address will be flash address, we shall avoid it to be written. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-09riscv: configs: Support AE350 SMP booting from flash flowRick Chen
Add two defconfigs to support AE350 SMP booting from flash. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-09riscv: Introduce CONFIG_XIP to support booting from flashRick Chen
When U-Boot boots from flash, during the boot process, hart_lottery and available_harts_lock variable addresses point to flash which is not writable. This causes boot failures on AE350. Introduce a config option CONFIG_XIP to support such configuration. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-09riscv: qemu: Use correct SYS_TEXT_BASE for S-mode on 32bit systemAnup Patel
For 32bit system, the OpenSBI (or BBL) will jump to 0x80400000 address in S-mode whereas for 64bit system it will jump to 0x80200000 address in S-mode. Currently, the S-mode U-Boot sets SYS_TEXT_BASE to 0x80200000 for both 32bit and 64bit system. This breaks S-mode U-Boot for 32bit system. This patch sets different SYS_TEXT_BASE for 32bit and 64bit system so that S-mode U-Boot works fine for both. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Karsten Merker <merker@debian.org>
2019-05-09riscv: qemu-riscv.h: define CONFIG_PREBOOT (enables extlinux)David Abdurachmanov
- Set fdt_addr variable, which is needed for extlinux to find FDT. Otherwise booting kernel using extlinux results in missing FDT. - Also run fdt addr with FDT address so that fdt commands would work out of the box in U-Boot prompt. This is successfully used by Fedora/RISCV with 5.1-rc3+ kernel using OpenSBI -> U-Boot (S-mode) [extlinux] -> Kernel setup. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-09riscv: set CONFIG_SYS_BOOTM_LEN to SZ_64MDavid Abdurachmanov
After updating Fedora/RISCV kernel to 5.1-rc3+ the size increased above the current threshold. Looking into HiKey, Dragonboards, etc. seems that SZ_64M is a popular option. This sucessfully boots Fedora/RISCV with 5.1-rc3+ kernel on QEMU 4.0 (master) with OpenSBI -> U-Boot (S-mode) [extlinux] -> Kernel setup. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-09mach-meson: g12a: add DWC2 peripheral mode supportNeil Armstrong
Adds support for Amlogic G12A USB Device mode. The DWC2 Controller behind the Glue can be connected to an OTG capable PHY. The Glue setups the PHY mode. This patch implements Device mode support by adding a board_usb_init/cleanup setting up the DWC2 controller and switch the OTG capable port to Device before starting the DWC2 controller in Device mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-09phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY driversNeil Armstrong
This adds support for the USB PHYs found in the Amlogic G12A SoC Family. The USB2 PHY supports Host and/or Peripheral mode, depending on it's position. The first PHY is only used as Host, but the second supports Dual modes defined by the USB Control Glue HW in front of the USB Controllers. The second driver supports USB3 Host mode or PCIE 2.0 mode, depending on the layout of the board. Selection is done by the #phy-cells, making the mode static and exclusive. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-09usb: dwc3: Add Meson G12A USB GlueNeil Armstrong
Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This driver sets the OTG capable port as Host mode by default, the switch to Device mode is to be done in a separate patch. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-05-09arm: mvebu: clearfog: add MMC to SPL DTBaruch Siach
This allows SPL to load the main U-Boot image from MMC once DM_MMC is enabled. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-09arm: mvebu: Add CRS305-1G-4S boardLuka Kovacic
CRS305-1G-4S has a switch chip with an integrated CPU (98DX3236) and like some of the other similar boards requires bin_hdr. bin_hdr (DDR3 init stage) is currently retrieved from the stock bootloader and compiled into the kwb image. Adds support for U-Boot, enable UART, SPI, Winbond SPI flash chip support and writing env to SPI flash. Signed-off-by: Luka Kovacic <me@lukakovacic.xyz> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-09arm: mvebu: db-88f6820-gp: Enable BLK and DM supportStefan Roese
This patch enables CONFIG_BLK and some DM enabled drivers on db-88f6820-gp to remove these compile warnings: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does use CONFIG_LIBATA but has CONFIG_AHCI not enabled. Please update the storage controller driver to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2019-05-09arm: mvebu: db-88f6720: Enable CONFIG_BLKStefan Roese
This patch enables CONFIG_BLK to remove this compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-09arm: mvebu: clearfog: Enable BLK and DM supportStefan Roese
This patch enables CONFIG_BLK and some DM enabled drivers on clearfog to remove these compile warnings: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does use CONFIG_LIBATA but has CONFIG_AHCI not enabled. Please update the storage controller driver to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-08Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
- Various PHY fixes / enhancements. - TI K2G fixes
2019-05-08net: phy: micrel: Find Micrel PHY node correctlyJames Byrne
In some of the device trees that specify skew values for KSZ90x1 PHYs the values are stored (incorrectly) in the MAC node, whereas in others it is in an 'ethernet-phy' subnode. Previously the code would fail to find and program these skew values, so this commit changes it to look for an "ethernet-phy" subnode first, and revert to looking in the MAC node if there isn't one. The device trees affected (where the skew values are in a subnode) are imx6qdl-icore-rqs.dtsi, r8a77970-eagle.dts, r8a77990-ebisu.dts, r8a77995-draak.dts, salvator-common.dtsi, sama5d3xcm.dtsi, sama5d3xcm_cmp.dtsi, socfpga_cyclone5_vining_fpga.dts, socfpga_stratix10_socdk.dts and ulcb.dtsi. Before this change the skew values in these device trees would be ignored. The device trees where the skew values are in the MAC node are socfpga_arria10_socdk.dtsi, socfpga_arria5_socdk.dts, socfpga_cyclone5_de0_nano_soc.dts, socfpga_cyclone5_de10_nano.dts, socfpga_cyclone5_de1_soc.dts, socfpga_cyclone5_is1.dts, socfpga_cyclone5_socdk.dts, socfpga_cyclone5_sockit.dts. These should be unaffected by this change. The changes were tested on a sama5d3xcm. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08net: phy: micrel: Use correct skew values on KSZ9021James Byrne
Commit ff7bd212cb8a ("net: phy: micrel: fix divisor value for KSZ9031 phy skew") fixed the skew value divisor for the KSZ9031, but left the code using the same divisor for the KSZ9021, which is incorrect. The preceding commit c16e69f702b1 ("net: phy: micrel: add documentation for Micrel KSZ90x1 binding") added the DTS documentation for the KSZ90x1, changing it from the equivalent file in the Linux kernel to correctly state that for this part the skew value is set in 120ps steps, whereas the Linux documentation and driver continue to this day to use the incorrect value of 200 that came from the original KSZ9021 datasheet before it was corrected in revision 1.2 (Feb 2014). This commit sorts out the resulting confusion in a consistent way by making the following changes: - Update the documentation to be clear about what the skew values mean, in the same was as for the KSZ9031. - Update the Micrel PHY driver to select the appropriate divisor for both parts. - Adjust all the device trees that state skew values for KSZ9021 PHYs to use values based on 120ps steps instead of 200ps steps. This will result in the same values being programmed into the skew registers as the equivalent device trees in the Linux kernel do, where it incorrectly uses 200ps steps (since that's where all these device trees were copied from). Signed-off-by: James Byrne <james.byrne@origamienergy.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08net: phy: aquantia: Set only autoneg on in register 4.c441Valentin-catalin Neacsu
For AQR405 in register 4.c441 bit 15 was override with 0. This caused the phy to not negotiate at 2.5GB rate with mac. To avoid this override it needed first to know the previous value of reg 4.c441 and set only bit 3. Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08net: phy: Fix return value check phy_probeSiva Durga Prasad Paladugu
Don't ignore return value of phy_probe() call as the probe may fail and it needs to be reported. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08net: phy: Reloc next and prev pointers inside phy_driversSiva Durga Prasad Paladugu
This patch relocates the pointers inside phy_drivers incase of manual reloc. Without this reloc, these points to invalid pre relocation address and hence causes exception or hang. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08ARM: k2g-ice: Add pinmux support for rgmii interfaceMurali Karicheri
This add pinmux configuration for rgmii interface so that network driver can be supported on K2G ICE boards. The pinmux configurations for this are generated using the pinmux tool at https://dev.ti.com/pinmux/app.html#/default As this required some BUFFER_CLASS definitions, same is re-used from the linux defnitions in include/dt-bindings/pinctrl/keystone.h Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08ARM: k2g-gp-evm: update to rgmii pinmux configurationMurali Karicheri
This patch updates pinmux configuration for K2G GP EVM based on data generated by the pinmux tool at https://dev.ti.com/pinmux/app.html#/default Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08drivers: net: ldpaa_eth: fix resource leakPankaj Bansal
if an error occurs in ldpaa_eth_init, need to free all resources before returning the error. Threfore, free net_dev before returning from ldpaa_eth_init. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- H6 Beelink GS1 board (Clément) - Olimex A64-Teres-I board (Jonas) - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej) - Change include order (Jagan) - EPHY clock changes (Jagan) - EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
2019-05-09sunxi: Enable EMAC on the Bananapi M3Chen-Yu Tsai
The Bananapi M3 has an RTL8211E PHY connected to the EMAC using RGMII. The PHY is powered by DCDC1 through SW @ 3.3V. The board is designed to use 3.3V with RGMII, instead of the standard reduced voltage of 2.5V we see everywhere. DLDO3, which provides the I/O voltages, is raised to match. This patch enables the EMAC and Realtek PHY drivers in the defconfig. The device tree file already has the EMAC enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-09sunxi: Enable EMAC on the Cubietruck PlusChen-Yu Tsai
The Cubietruck Plus has an RTL8211E PHY connected to the EMAC using RGMII. The PHY is powered by DLDO4 @ 3.3V, while the I/O pins are powered by DLDO3 @ 2.5V. This patch enables the EMAC and Realtek PHY drivers in the defconfig. The device tree file already has the EMAC enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-09sun50i: a64: Add Olimex A64-Teres-I board initial supportJonas Smedegaard
Olimex A64-Teres-I board is a mainboard (the only one so far) for Olimex Teres-I DIY laptop kit. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - MicroSD Slot - 16GB eMMC Flash - eDP LCD display - HDMI - USB Host - Battery management - 5V DC power supply - Certified Open Source Hardware (OSHW) Works: - i2C - MMC/SD - PWM backlight Known broken: - Internal keyboard (seems to be because the keyboard firmware loads a bootloader first, and then disconnects bootloader and connect real keyboard). External ones connected to the USB port work fine. This patch enables support for the A64-Teres-I board to u-boot, including enabling screen backlight (lacking from Linux device-tree). Linux commit details about the sun50i-a64-teres-i.dts sync: "arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins" (sha1: d91ebb95b96c8840932dc3a10c9f243712555467) Cosmetic warnings regarding whitespace and placement of SPDX notice for dts file was ignored. config and .dtsi file are adapted from pinebook files. Tested-by: Jonas Smedegaard <dr@jones.dk> Signed-off-by: Jonas Smedegaard <dr@jones.dk> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: move board entry in MAINTAINERS file at proper position] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-09net: sun8i_emac: Add EPHY CLK and RESET supportJagan Teki
Add EPHY CLK and RESET support for sun8i_emac driver to enable EPHY TX clock and EPHY reset pins via CLK and RESET framework. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-09test/dm: reset: Add reset_get_by_index[_nodev] testJagan Teki
Add sample dm reset test for reset_get_by_index and reset_get_by_index_nodev functionality code. Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-09reset: Get the RESET by index without deviceJagan Teki
Getting a RESET by index with device is not straight forward for some use-cases like handling clock operations for child node in parent driver. So we need to process the child node in parent probe via ofnode and process RESET operation for child without udevice but with ofnode. So add reset_get_by_index_nodev() and move the common code in reset_get_by_index_tail() to use for reset_get_by_index() Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-07 16:03:47 +0000