summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-22clk: rk3399: Add enable/disable clksJagan Teki
Yes, most of the high speed peripheral clocks in rk3399 enabled by default. But it would be better to handle them via clk enable/disable API for handling proper reset conditions like 'usb reset' over command line. So, enable USB, GMAC clock via enable/disable ops. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil.m@amarulasolutions.com> # roc-rk3399-pc Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockpro64: Enable HDMI output on rockpro64 boardAndrius Štikonas
Reference to commit that adds HDMI to other rk3399 boards: commit 9778edae5576 ("rockchip: Enable HDMI output on rk3399 board w/ HDMI") Signed-off-by: Andrius Štikonas <andrius@stikonas.eu> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Kever Yang <kever.yang@rock-chips.com> Tested-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22thermal: imx_scu_thermal: prevent boot hang with zero pdataAnatolij Gustschin
Should initialization of pdata values have failed for some reason, we end up in endless loop when getting the CPU temperature value and can not boot. Check alert value in pdata and only retry reading temperature if alert value is not zero. Also shorten the temperature info string. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-05-22cpu: imx8: use intended cpu-thermal device when getting temp valueAnatolij Gustschin
This fixes getting DT alert and critical pdata values in imx_scu_thermal driver. On i.MX8QXP using not initialized alert pdata value resulted in boot hang and endless loop outputting: CPU Temperature (47200C) has beyond alert (0C), close to critical (0C) waiting... While at it, preset CPU type values once to avoid multiple calls of device_is_compatible() for same property. Fixes: 3ee6ea443eb4 ("cpu: imx_cpu: Print the CPU temperature for iMX8QM A72") Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-22cpu: imx8: fix type and rate detectionAnatolij Gustschin
CPU type and rate detection is broken, for A35 cpu we get A53: ... sc_pm_get_clock_rate: resource:0 clk:2: res:3 Could not read CPU frequency: -22 CPU: NXP i.MX8QXP RevB A53 at 0 MHz at 47C Fixes: 55bc96f3b675 ("cpu: imx8: fix get core name and rate") Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-05-22rockchip: rk3399: enable spl-fifo-mode for sdmmcDeepak Das
adapting commit fa2047c47310 ("rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc") for rk3399. Since mmc to sram can't do dma, add patch to prevent aborts transferring TF-A parts. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-22board: puma: use dtb given on the commandline instead of using u-boot.dtbHeiko Stuebner
The make_fit_spl scripts get the dtb to use as commandline option, so use it for puma as well. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
2020-05-22ARM: uniphier: remove board_eth_init()Masahiro Yamada
This platform completely migrated to CONFIG_DM_ETH. board_eth_init() is only called from net/eth_legacy.c Remove the legacy hook. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22ARM: uniphier: delete or replace <common.h> includesMasahiro Yamada
<common.h> pulls in a lot of bloat. <common.h> is unneeded in most of places. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: drop #include <log.h> againMasahiro Yamada
I do not understand the changes made to these files by commit f7ae49fc4f36 ("common: Drop log.h from common header"). git show f7ae49fc4f36 -- arch/arm/mach-uniphier/ None of them uses the log function feature. Simply revert the changes made to these files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: drop #include <init.h> again from umc-pxs2.cMasahiro Yamada
I do not understand the change made to this file by commit 691d719db718 ("common: Drop init.h from common header"). git show 691d719db718 -- arch/arm/mach-uniphier/dram/umc-pxs2.c This file does not call or define any functions declared in <init.h> Simply revert the change made to this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: remove #include <net.h> again from micro-support-card.cMasahiro Yamada
I do not understand the changes made to this file by commit 90526e9fbac4 ("common: Drop net.h from common header"). git show 90526e9fbac4 -- arch/arm/mach-uniphier/micro-support-card.c The necessary declaration is already included by <netdev.h> at line 112. It also moved the <dm/of.h> inclusion, but I do not understand the motivation of doing so, either. Simply revert the changes made to this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22ARM: uniphier: include <asm/system.h> instead of <asm/cache.h> from psci.cMasahiro Yamada
I do not understand the change made to this file by commit 90526e9fbac4 ("common: Drop net.h from common header"). git show 90526e9fbac4 -- arch/arm/mach-uniphier/arm32/psci.c It added <asm/cache.h> while this file does not call the standard cache functions at all. All the uniphier-specific cache functions, uniphier_cache_*() are declared in cache-uniphier.h, which is already included from this file. Including <asm/system.h> is sensible to fix the -Wmissing-prototypes warnings because this file defines psci_cpu_on and psci_system_reset(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22mtd: rawnand: denali: deassert write protect pinMasahiro Yamada
[ Linux commit 9afbe7c0140f663586edb6e823b616bd7076c00a ] If the write protect signal from this IP is connected to the NAND device, this IP can handle the WP# pin via the WRITE_PROTECT register. The Denali NAND Flash Memory Controller User's Guide describes this register like follows: When the controller is in reset, the WP# pin is always asserted to the device. Once the reset is removed, the WP# is de-asserted. The software will then have to come and program this bit to assert/de-assert the same. 1 - Write protect de-assert 0 - Write protect assert The default value is 1, so the write protect is de-asserted after the reset is removed. The driver can write to the device unless someone has explicitly cleared register before booting the kernel. The boot ROM of some UniPhier SoCs (LD4, Pro4, sLD8, Pro5) is the case; the boot ROM clears the WRITE_PROTECT register when the system is booting from the NAND device, so the NAND device becomes read-only. Set it to 1 in the driver in order to allow the write access to the device. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-05-22ARM: uniphier: select DM_ETHMasahiro Yamada
drivers/net/smc911x.c has been converted to DM. select DM_ETH to enable it for all the UniPhier platform boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22mtd: rawnand: denali: configure SPARE_AREA_SKIP_BYTES only for denali_splMasahiro Yamada
This CONFIG option is only used in denali_spl.c Move it close to SPL_NAND_DENALI, and make it depend on SPL_NAND_DENALI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-21Merge git://git.denx.de/u-boot-shTom Rini
- Enable -ffunction-sections / -fdata-sections --gc-sections to SH - RCar Gen3 updates
2020-05-21efi_loader: check device path is not installed twiceHeinrich Schuchardt
Prior to corrective patches for virtio and SATA devices the same device path was installed on two different handles. This is not allowable. With this patch we will throw an error if this condition occurs for block devices. Update a comment for the installation of the simple file system protocol. Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: device path for SATA devicesHeinrich Schuchardt
Provide device path nodes for SATA devices. This avoids creation of two handles with the same device path indicating our root node. This is what the device paths for a SATA drive with four partitions could like: /VenHw(..)/Sata(0x0,0xffff,0x0) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(1,MBR,0x81ea591f,0x800,0x63ff830) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(2,MBR,0x81ea591f,0x6400800,0x9ff830) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(3,MBR,0x81ea591f,0x6e00800,0x16ef2ab0) /VenHw(..)/Sata(0x0,0xffff,0x0)/HD(4,MBR,0x81ea591f,0x1dcf3800,0x1dcedab0) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: device path for virtio block devicesHeinrich Schuchardt
The UEFI specification does not define a device sub-type for virtio. Let's use a vendor hardware node here. This avoids creation of two handles with the same device path indicating our root node. Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: initialize root node firstHeinrich Schuchardt
With commit 16ad946f41d3 ("efi_loader: change setup sequence") the detection of block device was moved to the start of the initialization sequence. In the case of virtio devices two handles with the same device path being created. The root node handle should be created before anything else. Reported-by: Ard Biesheuvel <ardb@kernel.org> Fixes: 16ad946f41d3 ("efi_loader: change setup sequence") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: add EFI_MEMORY_SP to memory attributesHeinrich Schuchardt
The UEFI 2.8 specification has introduced the EFI_MEMORY_SP memory attribute. Add it to the 'efidebug memmap' and 'efi mem' commands. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21efi_loader: Remove unnecessary debugPragnesh Patel
Remove unnecessary debug() from efi_set_variable_common(). native_name is NULL, so there is no meaning to print it. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-20Merge branch '2020-05-19-misc-fixes'Tom Rini
- Assorted minor fixes
2020-05-20sh: Enable ffunction-sections and fdata-sectionsMarek Vasut
Enable these two options to let compiler eliminate unused code. On R2Dplus, this results in considerable amount of saved space: text data bss dec hex filename - 266580 13196 39076 318852 4dd84 u-boot + 220214 12797 38745 271756 4258c u-boot Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20ARM: dts: rmobile: Enable eMMC DDR52 modes on Gen3 Salvator-X(S),ULCB,EbisuMarek Vasut
Enable DDR52 modes, since the SD core supports correct switching now. For completeness, list HS200 modes, however those were already enabled. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-05-20ARM: rmobile: Enable support for OpTee on Gen3Marek Vasut
Enable OpTee support on R-Car Gen3, so that U-Boot would copy the OpTee /firmware and /reserved-memory nodes into the Linux DT. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20ARM: rmobile: Merge prior-stage firmware DT fragment into U-Boot DT on Gen3Marek Vasut
The prior-stage firmware generates DT fragment containing the /firmware node, /reserved-memory node and /memory@ nodes. Merge these nodes into the U-Boot DT, so U-Boot can use this information. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20ARM: dts: rmobile: Reserve space in R-Car Gen3 DTsMarek Vasut
Reserve 4 kiB of space in R-Car Gen3 DTs when those DTs are compiled to permit patching in OpTee-OS /firmware node, /reserved-memory node and possibly also additional /memory@ nodes. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()Marek Vasut
Add weak function which is called right after fdtdec_setup() configured the U-Boot DT. This permits board-specific adjustments to the U-Boot DT before U-Boot starts parsing the DT. This could be used e.g. to patch in various custom nodes or merge in DT fragments from prior-stage firmware. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-20libfdt: Export overlay_apply_node() as fdt_overlay_apply_node()Marek Vasut
This function is useful to merge a subset of DT into another DT, for example if some prior-stage firmware passes a DT fragment to U-Boot and U-Boot needs to merge it into its own DT. Export this function to permit implementing such functionality. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2020-05-19cmd: avb: free partition buffer upon verify completionGary Bisson
Doing the same as the unittests for libavb [1]. Allows to run 'avb verify' multiple times which can be useful after a failure to be able to re-flash the partition and try again. [1] https://android.googlesource.com/platform/external/avb/+/refs/tags/android-9.0.0_r37/test/avb_slot_verify_unittest.cc#156 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2020-05-19drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOCJan Kiszka
This driver is safe to use in SPL without relocation. Denying DM_FLAG_PRE_RELOC prevents its usability for verifying the main U-Boot or other artifacts from the SPL unless needless enabling the full driver set (SPL_OF_PLATDATA). Fixes: 17e117408571 ("drivers: crypto: rsa_mod_exp: avoid DM_FLAG_PRE_RELOC") CC: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Marek Vasut <marex@denx.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-05-19test: Use ut_asserteq_mem() where possibleSimon Glass
Quite a few tests still use ut_assertok(memcmp(...)) and variants. Modify them to use the macro designed for this purpose. Suggested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-05-19mpc83xx, abb: remove suvd3 boardHeiko Schocher
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19mpc83xx: remove redundant MPC83xx_RESET #defineRasmus Villemoes
This macro is only used (tested for existence) in mpc83xx.c, which unconditionally includes mpc83xx.h where it is unconditionally defined. Removing it makes the remaining code easier to read. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-05-19Merge branch '2020-05-18-reduce-size-of-common.h'Tom Rini
Bring in the latest round of Simon's changes to reduce what's in <common.h> overall.
2020-05-19arm: mach-k3: Enable dcache in SPLJan Kiszka
Add support for enabling dcache already in SPL. It accelerates the boot and resolves the risk to run into unaligned 64-bit accesses. Based on original patch by Lokesh Vulta. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-05-19Nokia RX-51: Add automated test for running RX-51 build in qemuPali Rohár
This patch contains test/nokia_rx51_test.sh script which automatically download and compile all needed tools in local temporary directory to generate a simple MTD images for booting Maemo kernel image by U-Boot from RAM, eMMC and OneNAND. MTD images are then run in virtual n900 machine provided by qemu-linaro project. This script does not need any special privileges, so it can be run as non-root nobody user. It can be used to check that U-Boot for Nokia N900 is not broken and can be successfully booted in emulator. Script is registered to .azure-pipelines.yml, .gitlab-ci.yml and .travis.yml so it would be automatically run on those CI services. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-19arm: mach-k3: j721e_init: Add support for backup boot modesAndreas Dannenberg
When the boot of J721E devices using the primary bootmode (configured via device pins) fails a boot using the configured backup bootmode is attempted. To take advantage of the backup boot mode feature go ahead and add support to the J721E init code to determine whether the ROM code performed the boot using the primary or backup boot mode, and if booted from the backup boot mode, decode the bootmode settings into the appropriate U-Boot mode accordingly so that the boot can proceed. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-05-19ARM: omap3_logic boards: Convert to DM_ETHAdam Ford
With the converstion of SMC911x to DM, this can facilitate the omap3 boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. There isn't a clean solution to doing this in phases, so the boards are all being done together to avoid breaking functionality. Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs to show the address of the ethernet controller for each board. The board file, which is common betwen the OMAP35 and DM37 SOM LV and Torpedo boards, can remove the manual ethernet initialization, but it still needs to register the address and GPMC configuration for the Ethernet controller which is now being moved around to board_late_init(). Lastly, this patch updates the various config files to add the reference for DM_ETH and remove the SMC address, which is now fetched from the newly created device tree nodes. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-19ddr: k3-am654: EMIF Tool update to 2.02 for IO optimizations and fixesPraneeth Bajjuri
EMIF tool for AM65x [1] is now updated from rev 1.98 to 2.02 This update includes * Optimizations in IO configuration. * Fix for byte enablement in GCR registers. * Fixes for PG2.0 including ZQ control. [1]: http://www.ti.com/lit/zip/sprcah7 Acked-by: James Doublesin <doublesin@ti.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
2020-05-19configs: ls2080aqds_tfa_defconfig: enable DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2080AQDS board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT supportIoana Ciornei
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2080a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds the necessary DPMAC nodes (DPMAC 1-8) for protocol 42 (0x2A) on SD#1. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: ls2080aqds: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1088aqds_tfa_defconfig: enable DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088AQDS board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19board: ls1088aqds: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT supportIoana Ciornei
Add support for selecting the appropriate DTS file depending on the SERDES protocol used. The fsl-ls2088a-qds DTS will be used by default if there isn't a DTS file specifically made for the current SERDES protocol. This patch adds support for the on-board ports (DPMAC 1,2 and 4,5) found on the SERDES protocols 21(0x15) and 29(0x1d) for SD#1. On the LS1088AQDS board EMDIO1 is used with two onboard RGMII PHYs (Realtek RTL8211FD-CG), as well as 2 input/output connectors for mezzanine cards. Configuration signals from the Qixis FPGA control the routing of the external MDIOs. Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one of the 2 IO slots. As a consequence, a new node is added to describe register 0x54 as a MDIO mux controlled with child nodes describing all the IO slots as MDIO buses. Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the board_fit_config_name_match() function in order to choose the appropriate DTS. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19include/configs: ls1046afrwy: add support for boot targets.Pramod Kumar
ls1046afrwy does not support sata boot. So Override default BOOT_TARGET_DEVICES and support only mmc, usb and dhcp as boot targets. Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-28 17:55:24 +0000