summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-02cosmetic: Remove not needed string from kp_imx53.h configLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02cosmetic: config: Remove empty #ifdefsLukasz Majewski
After running tools/moveconfig.py it turned out that for various boards there are an empty #ifdef statements. Remove them to clean u-boot source code. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02imx8mq_evk: README: Make the underline marker fill the whole sentenceFabio Estevam
Let the underline marker "=" fill the whole sentence for better readability. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-02imx8mq_evk: README: Fix a typo in the destination pathFabio Estevam
The DDR firmware binaries should be copied to '$(srctree)', so fix a typo. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-02imx8mq_evk: README: Need to copy bl31.bin to U-Boot source treeFabio Estevam
After building ATF it is needed to copy the generated bl31.bin file to the U-Boot source tree. Make this step explicit in the instructions. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-01tools/imx8m_image.sh: remove bashismBaruch Siach
Use a single '=' to test string equality for compatibility with non-bash shells. Otherwise, if /bin/sh is dash, build fails: ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: signed_hdmi_imx8m.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator ./tools/imx8m_image.sh: 15: [: spl/u-boot-spl-ddr.bin: unexpected operator WARNING './spl/u-boot-spl-ddr.bin' not found, resulting binary is not-functional Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Chris Spencer <christopher.spencer@sea.co.uk>
2019-03-31pico-imx7d: README: Recommend the usage of a USB hubFabio Estevam
Since commit 9e3c0174da842 ("pico-imx7d: Add LCD support") we started to notice some hangs in U-Boot. There is not an issue on such commit per se, but due to the LCD support the current drawn is increased and this may cause issues when powering pico-imx7d-pi from USB. Some computers may be a bit strict with USB current draw and will shut down their ports if the draw is too high. The solution for that is to use an externally powered USB hub between the board and the host computer. Add such recommendation to the README file. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-03-31configs: icorem6: Use imx6 cratch register for bootcountJagan Teki
SRAM address used for bootcount on exiting code is erasing previous count value when system reset from Linux. So use the dedicated imx6 scratch register, GPR2 to preserve the contents even if the system reset from Linux. Fixes: 4eb9aa39350e ("configs: imx6qdl_icore_mmc: Enable watchdog and bootcounter") Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2019-03-31configs: icore: Fix U-Boot proper loading from nandMichael Trimarchi
SPL on Engicam i.Core M6 boards enabled DM, so it would require some malloc() pool before relocation in order to load U-Boot proper properly. So, enable SPL malloc() pool of 0x2000 size similarly like what we have used for icore mmc defconfigs. Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-03-31ARM: imx6q_logic: Enable UUID supportAdam Ford
With UUID support, the root can now point to UUID. This makes swiching between mmc 0 and mmc 1 easier by simplying changing mmcdev between 0 and 1. From there, the scripts handle the rest. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-31pico-imx6ul: Fix eMMC boot after DM_MMC conversionFabio Estevam
After the DM_MMC conversion the following eMMC boot error is observed: U-Boot SPL 2019.04-rc4 (Mar 20 2019 - 18:53:28 +0000) Trying to boot from MMC1 MMC Device 0 not found spl: could not find mmc device 0. error: -19 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### This happens because the SPL code does not initialize the SDHC pins and clock. Fix it by moving the original eMMC initialization from U-Boot proper to SPL. Reported-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Berton <fabio.berton@ossystems.com.br> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-31Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-03-29Merge branch '2019-03-29-master-imports'Tom Rini
- Bugfixes: - mmc: correct the HS400 initialization process - configs: ti: Move FIT image load address to avoid overwrite - lib: time: update module enable MACRO - Add mbrugger as RPi board maintainer, correct agraf's email address.
2019-03-29lib: time: update module enable MACROKever Yang
We'd better use correct way to check if module has enabled. for we have 3 timer MACRO: - CONFIG_TIMER - CONFIG_SPL_TIMER - CONFIG_TPL_TIMER Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-03-29doc/git-mailrc: correct entry 'agraf'Heinrich Schuchardt
Correct Alex's email address. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-03-29RPi: Add mbrugger as board maintainerMatthias Brugger
I took over maintainership from Alex Graf with commit 3157bbfa18 ("rpi: Make Matthias maintainer") But I forgot to update the board maintainer file. This patch adds myself to the game. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-03-29configs: ti: Move FIT image load address to avoid overwriteAndrew F. Davis
The FIT image is loaded to 0x8700_0000 followed by extracting from that several large images also into the 0x8x00_0000 range. Large images can end up overwriting the FIT image as it is being extracted from. Move the FIT load address clear out to 0x9000_0000, this will require a board to have at least 256MB of DRAM, if less then more careful planning will be required for that platform. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-03-29mmc: correct the HS400 initialization processBOUGH CHEN
After the commit b9a2a0e2e9c0 ("mmc: Add support for downgrading HS200/HS400 to HS mode"), it add a parameter in mmc_set_card_speed() which indicates that the HS200/HS400 to HS downgrade is happening. During the HS400 initialization, first select to HS200, and config the related clock rate, then downgrade to HS mode. So here also need to config the downgrade value to be true for two reasons. First, make sure in the function mmc_set_card_speed(), after switch to HS mode, first config the clock rate, then read the EXT_CSD, avoid receiving data of EXT_CSD in HS mode at 200MHz. Second, after issue the MMC_CMD_SWITCH command, it need to wait a bit then switch bus properties. Test on i.MX8QM MEK board, some Micron eMMC will stuck in transfer mode in this case, and USDHC will never get data transfer complete status, cause the uboot hang. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2019-03-29Merge tag 'efi-2019-04-rc5-2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI system for v2019.04-rc5-2 This patch series contains a bug fix for a double free in a UEFI unit test. The other patches are documentation only (except for the definition of two additional constants).
2019-03-28Merge tag 'arc-last-minute-for-2019.04' of git://git.denx.de/u-boot-arcTom Rini
This is last minute change which fixes problems in runtime on AXS10x board caused by some changes in NAND framework and tiny documentation improvement. Anyways NAND flash storage was never really used on the board for various reasons and now we decided to drop it for good. Note this change only touches 1 ARC board so that should be safe for others. As usual - build tested in TravisCI, see https://travis-ci.org/abrodkin/u-boot/builds/512041342
2019-03-28hsdk: readme: Suggest getting pyelftools with pipAlexey Brodkin
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Suggested-by: Yunir Salimzyanov <yunir@synopsys.com>
2019-03-28ARC: AXS10x: drop NAND supportEugeniy Paltsev
On AXS10x boards we have non-standard NAND controller which was never really used a lot as there're other much more convenient [as they are standard & removable] persistent media like SD-card and USB mass storage. Moreover after recent changes we face with some NAND controller runtime issues. So instead of keeping support of yet another non-standard peripheral we're dropping its support for good. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-03-28efi_loader: define development target in README.uefiHeinrich Schuchardt
Describe the target scope of the UEFI implementation in U-Boot. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-27efi_loader: update TODOs in doc/README.uefiHeinrich Schuchardt
The following TODOs are closed: - GetNextVariableName is not implemented - event groups - manage events in a linked list Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-27MAINTAINERS: adjust git repository for EFI PAYLOADHeinrich Schuchardt
The EFI PAYLOAD will use git://git.denx.de/u-boot-efi.git in future. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-27efi_loader: TODO for the EFI file protocolHeinrich Schuchardt
We currently only support EFI_FILE_PROTOCOL_REVISION while UEFI specs 2.4 - 2.7 prescribe EFI_FILE_PROTOCOL_REVISION2. Add a todo. Add missing constants for the EFI file protocol revision. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-27efi_selftest: avoid double free in dp utilities testHeinrich Schuchardt
Avoid duplicate FreePool() in unit test for the device patch utilities protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-26Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- configs: Stratix10: Remove CONFIG_USE_TINY_PRINTF
2019-03-26Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Various fixes for bugs found by u-boot test.py
2019-03-26Merge branch '2019-03-25-master-imports'Tom Rini
- Convert various SPI related options to Kconfig
2019-03-25Convert CONFIG_ENV_SPI_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25Convert CONFIG_DEFAULT_SPI_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_DEFAULT_SPI_BUS CONFIG_DEFAULT_SPI_MODE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25tqma6s_wru4_mmc: manage board_spi_cs_gpio correctlyPatrick Delaunay
Define the function board_spi_cs_gpio only when needed, only called in drivers/spi/mxc_spi.c. That avoid compilation issue for tqma6s_wru4_mmc_defconfig when CONFIG_SF_DEFAULT_BUS and CONFIG_SF_DEFAULT_CS are not defined (CMD_SF not defined) after migration in KConfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASEPatrick Delaunay
Replace CONFIG_ENV_SPI_BASE by the better CONFIG_SYS_SPI_BASE (it is not the location for environment but the location for U-Boot) and, as it is the only platform with use this define, remove it from whitelist. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25controlcenterdc: move some configuration in defconfig filePatrick Delaunay
Move some configurations in defconfig file - CONFIG_CMD_I2C - CONFIG_CMD_SPI This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25bcm7445: move some configuration in defconfig filePatrick Delaunay
Move some configurations in defconfig file - CONFIG_DM_SPI (removed by syncing defconfigs ) - CONFIG_CMD_SF - CONFIG_CMD_SPI - CONFIG_CMD_SF_TEST This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25Merge branch '2019-03-25-master-imports'Tom Rini
- 3 bugfixes: - mmc: Align MMC_TRACE with tiny printf - scripts/Makefile.extrawarn: Silence more DTC warnings - rsa: check that pointer checksum isn't NULL before using it
2019-03-25mmc: tmio: Clamp SD_SECCNT to 16bit values on 16bit IPMarek Vasut
On 16bit variants of the TMIO SD IP, the SECCNT register can only be programmed to 16bit values, while on the 32bit and 64bit variants it can be programmed to 32bit values. The SECCNT register indicates the maximum number of blocks in a continuous transfer. Hence, limit the maximum continuous transfer block count to 65535 blocks on 16bit variants of the TMIO IP and to BIT(32)-1 blocks on 32bit and 64bit variants. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-25mmc: sh_mmcif: Set default MMCIF clock rateMarek Vasut
Set MMCIF clock rate to 97.5 MHz, which is the default according to Gen2 datasheet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
2019-03-25clk: renesas: Add support for setting MMCIF clock divider on Gen2Marek Vasut
Add code for configuring the MMC0CKCR/MMC1CKCR on Gen2 platforms. This allows the MMCIF driver to set higher clock rate if desired. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25clk: renesas: Fix swapped div and mul in debug output on Gen2Marek Vasut
The $div and $mul values were swapped in the debug output, fix this. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25clk: renesas: Fix SDH clock divider decoding on Gen2Marek Vasut
The gen2_clk_get_sdh_div() function is supposed to look up the $val value read out of the SDCKCR register in the supplied table and return the matching divider value. The current implementation was matching the value from SDCKCR on the divider value in the table, which is wrong. Fix this and rework the function a bit to make it more readable. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulatorMarek Vasut
An ADATA 16GB Industrial MLC card has so much capacitance on the Vcc pin that the usual toggling of regulator to power the card off and on is insufficient. When the card is calibrated into UHS SDR104 mode, it will remain in that mode across the power cycle and subsequent attempt to communicate with the card will fail. The test with this card is to insert it into an SDHI slot and perform "mmc dev 0 ; mmc dev 0", where the second "mmc dev 0" will fail. Fix this problem by increasing the off-on delay from 0 to 20 mS. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-25configs: Stratix10: Remove CONFIG_USE_TINY_PRINTFLey Foon Tan
Use full printf instead of tiny printf in SPL. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-03-25mmc: Align MMC_TRACE with tiny printfMarek Vasut
The tiny printf implementation only supports %x format specifier, it does not support %X . Since it makes little difference whether the debug output prints hex numbers in capitals or not, change it to %x and make the MMC_TRACE output work with tiny printf too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Simon Glass <sjg@chromium.org>
2019-03-25scripts/Makefile.extrawarn: Silence more DTC warningsTom Rini
While our "extrawarns" logic has gotten out of sync with upstream Kbuild, for now lets start by bringing in the latest set of DTC_FLAGS from the Linux Kernel 5.0 to match their behavior in silencing warnings from dtc. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-25rsa: check that pointer checksum isn't NULL before using itPhilippe Reynes
The pointer checksum were used before checking that it isn't NULL. We move the code that use it after the check. Reported-by: Coverity (CID: 185835) Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-22Merge branch '2019-03-22-master-imports'Tom Rini
- Don't attempt to write to ext4 volumes with the metadata_csum feature we don't support - Correct how we build dtb files. - Fix regression on SPL_FIT with FIT_IMAGE_TINY - Minor TI platform fixes
2019-03-22fs: ext4: do not write on filesystem with metadata_csum featureSébastien Szymanski
U-Boot doesn't support metadata_csum feature. Writing to filesystem with metadata_csum feature makes the filesystem corrupted and unbootable by Linux: [ 2.527495] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 0 failed (52188!=0) [ 2.537421] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 1 failed (5262!=0) ... [ 2.653308] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 14 failed (42611!=0) [ 2.662179] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 15 failed (21527!=0) [ 2.687920] JBD2: journal checksum error [ 2.691982] EXT4-fs (mmcblk0p2): error loading journal [ 2.698292] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -74 Don't write to filesystem with meatadata_csum feature to not corrupt the filesystem. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
generated by cgit (git 2.34.1) at 2025-01-15 07:29:07 +0000