summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-28usb: host: ohci-generic: add RESET supportPatrice Chotard
use array to save deasserted resets reference in order to assert them in case of error during probe() or during driver removal. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28usb: host: ohci-generic: add CLOCK supportPatrice Chotard
use array to save enabled clocks reference in order to disabled them in case of error during probe() or during driver removal. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28usb: host: ehci-generic: add generic PHY supportPatrice Chotard
Extend ehci-generic driver with generic PHY framework Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28usb: host: ehci-generic: add error path and .remove callbackPatrice Chotard
Use an array to save enabled clocks reference and deasserted resets in order to respectively disabled and asserted them in case of error during probe() or during driver removal. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28usb: host: ehci-generic: replace printf() by error()Patrice Chotard
this allows to get file, line and function location of the current error message. Signed-off-by: patrice chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28dm: core: add ofnode_count_phandle_with_args()Patrice Chotard
This function is usefull to get phandle number contained in a property list. For example, this allows to allocate the right amount of memory to keep clock's reference contained into the "clocks" property. To implement it, either of_count_phandle_with_args() or fdtdec_parse_phandle_with_args() are used respectively for live tree and flat tree. By passing index = -1, these 2 functions returns the number of phandle contained into the property list. Add also the dev_count_phandle_with_args() based on ofnode_count_phandle_with_args() Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28clk: add clk_release_all()Patrice Chotard
Add clk_release_all() method which Disable/Free an array of clocks that has been previously requested by clk_request/get_by_*() Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28reset: add reset_release_all()Patrice Chotard
Add reset_release_all() method which Assert/Free an array of resets signal that has been previously successfully requested by reset_get_by_*() Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28reset: add reset_request()Patrice Chotard
This is needed in error path to assert previously deasserted reset by using a saved reset_ctl reference. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28usb: host: xhci-dwc3: Add generic PHY supportPatrice Chotard
Add support of generic PHY framework support Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28drivers: phy: add generic_phy_valid() methodPatrice Chotard
This allow to check if a PHY has been correctly initialised and avoid to get access to phy struct. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-07-28drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() failsPatrice Chotard
phy->dev need to be set to NULL in case of generic_phy_get_by_index() fails. Then phy->dev can be used to check if the phy is valid Reported-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28usb: host: xhci-dwc3: Add dual role mode support from DTPatrice Chotard
DWC3 dual role mode is selected using DT "dr_mode" property. If not found, DWC3 controller is configured in HOST mode by default Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28usb: host: xhci-dwc3: Convert driver to DMPatrice Chotard
Add Driver Model support with use of generic DT compatible string "snps,dwc3" Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-28usb: add static to local symbolsMasahiro Yamada
Sparse reports "... was not declared. Should it be static?" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-28dm: tegra: Move nyan-big, jetson-tk1/tx1, beaver to livetreeSimon Glass
Change these board to use a live device tree after relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28fdtdec: Drop old compatible valuesSimon Glass
These are not needed now since the drivers now use driver model. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: power: Convert as3722 to driver modelSimon Glass
Convert this PMIC driver to driver model and fix up other users. The regulator and GPIO functions are now handled by separate drivers. Update nyan-big to work correct. Three boards will need to be updated by the maintainers: apalis-tk1, cei-tk1-som. Also the TODO in the code re as3722_sd_set_voltage() needs to be completed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28power: Add a GPIO driver for the as3722 PMICSimon Glass
This pmic includes GPIOs which should have their own driver. Add a driver to support these. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28power: Add a regulator driver for the as3722 PMICSimon Glass
This pmic includes regulators which should have their own driver. Add a driver to support these. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: pci: Convert to livetreeSimon Glass
Update the tegra pci driver to support a live device tree. Fix the check for nvidia,num-lanes so that an error will actually be detected. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: mmc: Convert to livetreeSimon Glass
Update the tegra mmc driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: pwm: Convert to livetreeSimon Glass
Update the tegra pwm driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: i2c: Convert to livetreeSimon Glass
Update the tegra i2c driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: spi: Convert to livetreeSimon Glass
Update the tegra114 spi driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: usb: Convert to livetreeSimon Glass
Update the Tegra EHCI driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: gpio: Convert to support livetreeSimon Glass
Update the GPIO driver to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28tegra: dts: Move stdout-path to /chosenSimon Glass
This property should be in the /chosen node, not /aliases. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: video: tegra124: Convert to livetreeSimon Glass
Update these drives to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: Convert clock_decode_periph_id() to support livetreeSimon Glass
Adjust this to take a device as a parameter instead of a node. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: tegra: Convert USB setup to livetreeSimon Glass
Adjust this code to support a live device tree. This should be implemented as a PHY driver but that is left as an exercise for the maintainer. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28tegra: tegra124: Add a PMC syscon driverSimon Glass
The PMC can be modelled as a syscon peripheral. Add a driver for this so that it can be accessed by drivers when needed. Enable it for tegra124 boards. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28tegra: spl: Enable debug UARTSimon Glass
Enable the debug UART in SPL to allow early serial output even if the standard UART does not work (e.g. due to driver model problem). Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: core: Fix up ofnode_get_addr_index() for 64-bit valuesSimon Glass
At present this function only supports 32-bit (single-cell) values. Update it to support two-cell values also. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28dm: core: Add ofnode_read_resource()Simon Glass
We sometimes need to read a resource from an arbitrary node. In any case for consistency we should not put the live-tree switching code in a dev_read_...() function. Update this to suit. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28console: simplify puts()Masahiro Yamada
Current puts() and putc() have similar #ifdef / if() conditionals. Make puts() iterate over putc() to avoid code duplication. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28sandbox: remove os_putc() and os_puts()Masahiro Yamada
They are unused since commit d8c6fb8cedbc ("sandbox: Drop special case console code for sandbox"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-07-28dm: ofnode: change return type of dev_read_prop() to opaque pointerMasahiro Yamada
DT property values can be strings as well as integers. This is why of_get_property/fdt_getprop returns an opaque pointer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-07-28dm: Fix typo in include-guard for dm-structs.hPhilipp Tomsich
The include-guard for dm-structs.h was misspelled as __DT_STTUCTS. Change it. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28cmd: scsi: Fix null pointer dereference in 'scsi reset'Bin Meng
During 'scsi reset', scsi_bus_reset() is called with udevice pointed to NULL, which causes exception. As a temporary fix, disable the call for DM SCSI for now. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28dm: ahci: Avoid scsi_scan_dev() in ahci_probe_scsi()Bin Meng
Running 'scsi scan' command causes scsi_scan_dev() to be called, from which device_probe() is called and consequently AHCI driver probe routine will be called as SCSI driver's parent, and finally ahci_probe_scsi() calls scsi_scan_dev() again. Remove the call to scsi_scan_dev() in ahci_probe_scsi(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-27rockchip: puma-rk3399: remove duplicate code (merge artifact)Kever Yang
A few lines (defines and declarations) had been duplicated when the puma-rk3399 board was initially merged. This removes the duplicates and changes the style to use local constants instead of pasted literals. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [fixed up commit-message & converted to use 'const u32':] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27rockchip: add u-boot specific dts for rk3036 sdkAndy Yan
Add this dts to enable debug uart releated devices before relocation. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27rockchip: use puts instead of printf when back to bootromAndy Yan
printf will increase the code size more than 1kb, but platform like rk3036 has no enough space for it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27rockchip: enable SPL_LIBGENERIC for rk3036 based boardsAndy Yan
function board_init_f_init_reserve will call memset, which is implemented in lib, and enabled by CONFIG_SPL_LIBGENERIC_SUPPORT in spl stage. To reduce the code size, also enable SPL_TINY_MEMSET. As rk3036 will return to bootrom immediately after dram initialization, there is no need to run DM, so disable SPL_DM_SERIAL. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27rockchip: disable SPL_ARCH_MEMCPY/MEMSET for rk3036Andy Yan
RK3036 has no enough sapce use ARCH_MEMCPY/MEMSET in spl stage Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 ↵Andy Yan
based board RK3036 only has 4kb sram, the spl code will use 3.4 ~ 3.5 kb, the last 0.5kb are used for SP and GD, so there is no space for malloc. Also, the spl will directly return to bootrom after dram initialized, they never need the space for malloc. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size ↵Andy Yan
before relocation SPL and normal u-boot stage use different malloc pool size configuration before relocation, so use CONFIG_VAL(SYS_MALLOC_F_LEN) to fit different boot stage. Signed-off-by: Andy Yan <andyshrk@gmail.com> Changes in v3: - use CONFIG_VAL(), which suggested by Simon Changes in v2: None arch/sandbox/cpu/start.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27microblaze: spl: configure SYS_MALLOC_F_LEN independently for SPL and full ↵Andy Yan
U-Boot Some platforms have very limited SRAM to run SPL code, so there may not be the same amount space for a malloc pool before relocation in the SPL stage as the normal U-Boot stage. Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN, so the size of pre-relocation malloc pool can be configured memory space independently. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [fixed up commit-message:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27powerpc: spl: configure SYS_MALLOC_F_LEN independently for SPL and full U-BootAndy Yan
Some platforms have very limited SRAM to run SPL code, so there may not be the same amount space for a malloc pool before relocation in the SPL stage as the normal U-Boot stage. Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN, so the size of pre-relocation malloc pool can be configured memory space independently. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [fixed up commit-message:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit (git 2.34.1) at 2024-12-26 22:20:51 +0000