summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-13x86: Add coreboot timestampsSimon Glass
Add selected coreboot timestamps into bootstage to get a unified view of the boot timings. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13x86: Support adding coreboot timestanps to bootstageSimon Glass
Coreboot provides a lot of useful timing information. Provide a facility to add this to bootstage on start-up. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13x86: config: Enable LZO for coreboot, remove zlib, gzipSimon Glass
We don't use zlib and gzip but do use lzo, so enable this. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13x86: Fix warning in cmd_ximg.c when CONFIG_GZIP is not definedSimon Glass
This local variable is not used unless CONFIG_GZIP is defined. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13bootstage: Allow marking a particular line of codeSimon Glass
Add a function which allows a (file, function, line number) to be marked in bootstage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
2013-05-13x86: Enable bootstage for corebootSimon Glass
This is a convenient way of finding out where boottime is going. Enable it for coreboot. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13Call bootstage_relocate() after malloc is inittedDoug Anderson
In a previous CL we added the bootstage_relocate(), which should be called after malloc is initted. Now we call it on generic board. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2013-05-13bootstage: Copy bootstage strings post-relocationDoug Anderson
Any pointers to name strings that were passed to bootstage_mark_name() pre-relocation should be copied post-relocation so that they don't get trashed as the original location of U-Boot is re-used for other purposes. This change introduces a new API call that should be called from board_init_r() after malloc has been initted on any board that uses bootstage. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2013-05-13bootstage: Add stubs for new bootstage functionsSimon Glass
Some functions don't have a stub for when CONFIG_BOOTSTAGE is not defined. Add one to avoid #ifdefs in the code when this is used in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Che-Liang Chiou <clchiou@chromium.org> Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
2013-05-13x86: Re-enable PCAT timer 2 for beepingSimon Glass
While we don't want PCAT timers for timing, we want timer 2 so that we can still make a beep. Re-purpose the PCAT driver for this, and enable it in coreboot. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13x86: Remove ISR timerSimon Glass
This is no longer used since we prefer the more accurate TSC timer, so remove the dead code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13x86: Remove old broken timer implementationSimon Glass
Tidy up some old broken and unneeded implementations. These are not used by coreboot or anything else now. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Michael Spang <spang@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13x86: Add TSC timerSimon Glass
This timer runs at a rate that can be calculated, well over 100MHz. It is ideal for accurate timing and does not need interrupt servicing. Tidy up some old broken and unneeded implementations at the same time. To provide a consistent view of boot time, we use the same time base as coreboot. Use the base timestamp supplied by coreboot as U-Boot's base time. Signed-off-by: Simon Glass <sjg@chromium.org>base Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13x86: Rationalise kernel booting logic and bootstageSimon Glass
The 'Starting linux' message appears twice in the code, but both call through the same place. Unify these and add calls to bootstage to mark the occasion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Michael Spang <spang@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13x86: Implement panic output for corebootSimon Glass
panic_puts() can be called in early boot to display a message. It might help with early debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
2013-05-13x86: Declare global_data pointer when it is usedSimon Glass
Several files use the global_data pointer without declaring it. This works because the declaration is currently a NOP. But still it is better to fix this so that x86 lines up with other archs. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13x86: Remove legacy board init codeSimon Glass
Since we use CONFIG_SYS_GENERIC_BOARD on x86, we don't need this anymore. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13x86: Remove unused portion of link scriptSimon Glass
Since we don't have real-mode code now, we can remove this chunk of the link script. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13x86: Remove unused bios/pci codeSimon Glass
Graeme Russ pointed out that this code is no longer used. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13avr32: fix relocation address calculationAndreas Bießmann
Commit 1865286466a5d0c7f2e3c37632da56556c838e9e (Introduce generic link section.h symbol files) changed the __bss_end symbol type from char[] to ulong. This led to wrong relocation parameters which ended up in a not working u-boot. Unfortunately this is not clear to see cause due to RAM aliasing we may get a 'half-working' u-boot then. Fix this by dereferencing the __bss_end symbol where needed. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-13bfin: Move gpio support for bf54x and bf60x into the generic driver folder.Sonic Zhang
The gpio spec for bf54x and bf60x differ a lot from the old gpio driver for bf5xx. A lot of machine macros are used to accomodate both code in one gpio driver. This patch split the old gpio driver and move new gpio2 support to the generic gpio driver folder. - To enable gpio2 driver, macro CONFIG_ADI_GPIO2 should be defined in the board's config header file. - The gpio2 driver supports bf54x, bf60x and future ADI processors, while the older gpio driver supports bf50x, bf51x, bf52x, bf53x and bf561. - All blackfin specific gpio function names are replaced by the generic gpio APIs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: The buf variable in bfin_mac.c is not used and produces warning,Marek Vasut
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Add comments for watchdog event initialization.Sonic Zhang
- Add comments for watchdog event initialization. - Make sure the writting operation to MMRs are finished. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Move blackfin serial driver out of blackfin arch folder.Sonic Zhang
- Move blackfin serial driver to the generic driver folder. - Move blackfin serial headers to blackfin arch head folder. - Update the include path to blackfin serial header in start up code. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Move blackfin watchdog driver out of the blackfin arch folder.Sonic Zhang
- Enable hw_watchdog_init() in watchdog.h if CONFIG_HW_WATCHDOG is defined. - Move blackfin hw watchdog driver to the generic driver folder. - Call hw_watchdog_init() from blackfin board init code. - Reuse macro CONFIG_WATCHDOG_TIMEOUT_MSECS - Update README.watchdog accordingly Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13bf609: add SPI register base addressScott Jiang
- BF609 spi driver depend on this. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Uart divisor should be set after their values are generated.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Add memory virtual console to blackfin serial driver.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Enable early print via the generic serial API.Sonic Zhang
Remove blackfin specific implementation of the generic serial API when early print macro is defined. In BFIN_BOOT_BYPASS mode, don't call generic serial_puts, because early print in bypass mode is running before code binary is relocated to the link address. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13bfin: discard invalid data and clear RXS in bf5xx spi driverScott Jiang
There may be dirty data in RDBR, so we should discard invalid data. This operation also clears RXS bit in STAT register. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13bfin: Remove spi dma function in bf5xx.Scott Jiang
BF5xx rx dma causes spi flash random read error. Accually spi controller has problems both on tx and rx dma. So remove spi dma support in u-boot. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Fit u-boot image size into limited nor flash on blackfin.Sonic Zhang
- Disable NAND driver on bf537-stamp. - Make MMC_SPI optional. - Disable LCD driver on bf527-ezkit. - Enlarge BF609 nor flash reserved size from 256k to 512k bytes. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
2013-05-13blackfin: bf609: add softswitch config commandBob Liu
Add softswitch_output command for bf609-ezkit to enable softswitches. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: bf609: implement soft switchSonic Zhang
Set up soft switch pins properly in board init code. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2013-05-13blackfin: Correct early serial mess output in BYPASS boot mode.Sonic Zhang
The early serial should not be configured again in initcode() for BYPASS boot mode and in start() for the other LDR boot modes. In BYPASS boot mode, the start up code is located in Nor flash address other than the DRAM address defined in link script. The code embedded string can't be addressed by its compile time symbol. Calculate it according to the flash offset. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Set correct early debug serial baudrate.Sonic Zhang
Calculate the early uart clock from the system clock registers set by the bootrom other than the predefine uboot clock macros. Split the early baudrate setting function and the normal baudrate setting one. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: run core1 from L1 code sram start address in uboot init code on core 0Sonic Zhang
Define core 1 L1 code sram start address. Add function to enable core 1 for BF609 and BF561. Add config macro to allow customer to run core 1 in uboot init code on core 0. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: add baudrate to bdinfoBob Liu
Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13Blackfin: adjust asm constraints with NMI workaroundMike Frysinger
Newer gcc versions will sometimes use a Preg when "r" constraints, but that'll fail if we use an Ireg in the assignment. So force the code to always use a Dreg. This also fixes early boot crashes for older Blackfin parts when compiled with gcc-4.5. This version ends up selecting the same register for the input and output variables which corrupts the output assignment triggering an exception. P2 = 0xffe02008; /* EVT2 */ R0 = RETS; CALL 1f; RTN; 1: P2 = RETS; <-- BAD RETS = R0; [P2] = P2; <-- BAD Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: reduce size of u-boot.ldr in bf548-ezkit default config.Bob Liu
Enable VIDEO and NAND supports only when the config options is defined. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: limit the max memory dma peripheral transfer size to 4 bytes.Sonic Zhang
Othersize, the bf609 memory dma halts after being enabled. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13blackfin: Change the member's type in dma structures.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-10Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.hGerald Van Baren
The define should not have been put in fdt.h originally, libfdt_env.h is the proper place for target-specific customizations. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2013-05-10Added license header to dtc/libfdt/fdt.h and libfdt_env.hJustin Sobota
This commit adds a license header to fdt.h and libfdt_env.h because the license was omitted. U-Boot note: the u-boot libfdt_env.h header portion was not applied to the u-boot libfdt_env.h because that file was created by Gerald Van Baren (with a license header). - gvb Ref: DTC commit 27cdc1b1 Signed-off-by: Justin Sobota <jsobota@ti.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2013-05-10Fix typoFrançois Revol
Ref: DTC commit cc11e522 Signed-off-by: François Revol <revol@free.fr>
2013-05-10Export fdt_stringlist_contains()Simon Glass
This function is useful outside libfdt, so export it. Ref: DTC commit b7aa300e Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2013-05-10Merge branch 'patman' of git://git.denx.de/u-boot-x86Tom Rini
2013-05-10openrisc: move board linker script(s) to a common in cpu/Stefan Kristiansson
Unifies the openrisc boards linker scripts into a common one. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2013-05-10openrisc: specify a memory region for u_boot_listsStefan Kristiansson
Since there are two memory areas defined, vectors and ram, the linker will error when neither of them are specified for a section. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2013-05-10fs/ext4: Support device block sizes != 512 bytesEgbert Eich
The 512 byte block size was hard coded in the ext4 file systems. Large harddisks today support bigger block sizes typically 4096 bytes. This patch removes this limitation. Signed-off-by: Egbert Eich <eich@suse.com>
generated by cgit (git 2.34.1) at 2024-12-30 19:14:18 +0000