summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-17SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to KconfigDalon Westergreen
Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig. Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-17SPL: add support to boot from a partition typeDalon Westergreen
the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found. Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-17arm: omap5: Fix generation of reserved-memory DT nodeAndrew F. Davis
When the node 'reserved-memory' is not defined in the DT we fail to add needed properties. We also fail to move 'offs' to point to the new node. Fix these here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-17fsl_i2c.c: Fix warning on gcc-6.xTom Rini
With gcc-6.x we see: drivers/i2c/fsl_i2c.c:86:3: warning: ‘fsl_i2c_speed_map’ defined but not used [-Wunused-const-variable=] The easy way to fix this is that since we only use fsl_i2c_speed_map at all on __M68K__ move the existing guards around slightly. Reported-by: Thomas Schaefer <Thomas.Schaefer@kontron.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-02-17tools: kwboot: don't adjust destaddr when patching the imageChris Packham
Commit 94084eea3bd3 ("tools: kwbimage: Fix dest addr") changed kwbimage to do this adjustment. So now the adjustment in kwboot is not needed (and would prevent UART booting for images generated by the new kwbimage). Remove the destaddr adjustment in kwboot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-17tools: kwbimage: Fix unchecked return value and fd leakMario Six
The return value of fstat was not checked in kwbimage, and in the case of an error, the already open file was not closed. Fix both errors. Reported-by: Coverity (CID: 155971) Reported-by: Coverity (CID: 155969) Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-13Prepare v2017.03-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-13Merge tag 'xilinx-fixes-for-v2017.03' of git://www.denx.de/git/u-boot-microblazeTom Rini
Xilinx fixes for v2017.03 - defconfig alignment - Topic.nl board updates - Minor microblaze comment fix
2017-02-13i2c: sandbox: remove code snippet from Kconfig helpMasahiro Yamada
With the Kconfig re-sync with Linux 4.10, characters such as '}', ';' in Kconfig help message cause warnings: $ make defconfig *** Default configuration is based on 'sandbox_defconfig' drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}' drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';' Drop the Device Tree fragment from the help. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12kconfig: re-sync with Linux 4.10Masahiro Yamada
Re-sync all files under the scripts/kconfig directory with Linux 4.10. Some parts include U-Boot own modification. I made sure to not revert the following commits: 5b8031ccb4ed ("Add more SPDX-License-Identifier tags") 192bc6948b02 ("Fix GCC format-security errors and convert sprintfs.") da58dec86616 ("Various Makefiles: Add SPDX-License-Identifier tags") 20c20826efab ("Kconfig: Enable usage of escape char '\' in string values") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12flash: compile common/flash.c iif CONFIG_MTD_NO_FLASH is enabledMasahiro Yamada
The whole of common/flash.c is guarded by #if defined() ... #endif. Move the conditional to common/Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12flash: complete CONFIG_SYS_NO_FLASH move with renamingMasahiro Yamada
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11Merge git://git.denx.de/u-boot-samsungTom Rini
2017-02-11Merge git://git.denx.de/u-boot-rockchipTom Rini
2017-02-10microblaze: Fix endif macro commandMichal Simek
Use correct name in endif comment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10configs/topic_miami.h: Correct kernel_size in default environmentMike Looijmans
The kernel partition in QSPI is 0x440000 large, not 0x400000. Fix this in the environment, otherwise the kernel will fail to boot if it occupies more space. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10topic_miami(plus) defconfig: Enable DFU RAM supportMike Looijmans
Allow sending firmware to RAM. Without this, the DFU support was not of much use. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10topic_miami_defconfig: Remove NFS and NET supportMike Looijmans
On the miami board, ethernet is accessed via logic. To use it, one would have to program logic first and then set up the rgmii conversion block as well. Not likely to ever be used, so disable network support by default to save some space. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10xilinx: Align defconfig with current Kconfig orderMichal Simek
Keep all defconfig sorted to ensure the smallest diff. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10exynos: Drop large alignment for SDRAM parametersSimon Glass
We don't ever search for these so there is no need for a 4KB alignment. It just wastes space. Drop this and use the standard 4-byte alignment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-02-09Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2017-02-09rockchip: rename miniarm to tinker boardEddie Cai
Miniarm is the internal project code. Now it is officially named Tinker board. So rename it. Signed-off-by: Eddie Cai <eddie.cai@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09rockchip: Enable ETH address randomization for the firefly-rk3288Romain Perier
This commit enables ethernet MAC address randomization on the firefly-rk3288. It removes the error at startup 'ethernet@ff290000 address not set'. Signed-off-by: Romain Perier <romain.perier@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09rockchip: firefly: configs: use spl back to bromJacob Chen
Keep it same with other boards otherwise i have to write special script for it.. Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09rockchip: configs: move env offset to common headerJacob Chen
To reduce redundant code. Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09rockchip: Correct MAINTAINER entry for chromebook_minnieSimon Glass
This is wrong at present, so genboardscfg.py gives the following warnings: WARNING: no status info for 'chromebook_minnie' WARNING: no maintainers for 'chromebook_minnie' Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-09rockchip: dts: rk3288: correct sdram setting for miniarmJacob Chen
miniarm board use lpddr3 Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Added 'rockchip:' prefix to subject: Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: I84c3679dab2dbd8d01c1ebfd22220946d07c03cd
2017-02-09omap_hsmmc.c: Fix build warning on non-omap3Tom Rini
It was incorrect to always include "asm/arch-omap3/mux.h" constantly. This introduced warnings on non-omap3 where certain values will conflict between the various families. Conditionally guard the inclusion in order to correct the problem. Fixes: 6aca17c9b7e8 ("drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36xx") Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-09Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2017-02-09Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini
2017-02-09omap3_logic: Switch to simple malloco in SPLTom Rini
To save more space, switch to simple malloc here. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-09qemu-x86_64_defconfig: Disable CONFIG_BOARD_EARLY_INIT_FTom Rini
The qemu-x86* targets do not want to enable this. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-09mmc: init mmc block devices on probeFiach Antaw
MMC devices accessed exclusively via the driver model were not being initialized before being exposed as block devices, causing issues in scenarios where the MMC device is first accessed via the uclass block interface. Signed-off-by: Fiach Antaw <fiach.antaw@uqconnect.edu.au>
2017-02-09drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36xxAdam Ford
On the OMAP36xx/37xx the CONTROL_WKUP_CTRL register has a field (bit 6) named GPIO_IO_PWRDNZ. If 0, the IO buffers which are related to GPIO_126, 127 and 129 are disabled. Some boards may need this for MMC. After the PBIAS is configured, this bit should be set high to enable these GPIO pins. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-09mmc: ftsdc021_sdhci: remove the ftsdc021_sdhci.cJaehoon Chung
ftsdc021_sdhci.c is dead file. There is no reason to maintain this host controller. Removes the entire ftsdc021_sdhci.c. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-09mmc: mmc-uclass: use the fixed devnum with alias nodeJaehoon Chung
If there are alias nodes as "mmc", use the devnum as alias index number. This patch is for fixing a problem of Exynos4 series. Problem is the below thing. Current legacy mode: EXYNOS DWMMC: 0, SAMSUNG SDHCI: 1 After using DM: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 Dev index is swapped. Then u-boot can't find the kernel image..because it is already set to 0 as mmcdev. If change from legacy to DM, also needs to touch all exynos4 config file. For using simply, just supporting the fixed devnum with alias node is better than it. Usage: alaise { .... mmc0 = &sdhci2; /* eMMC */ mmc1 = &sdhci1; /* SD */ ... } Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09arm: dts: trats: add the pmic node for using DMJaehoon Chung
To use driver-model adds the pmic node for max8997. This is used as kernel device-tree in Linux. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09power: pmic: add the max8997 controller for DMJaehoon Chung
Add the max8997 controller for Driver model. Exynos4210 is using max8997 pmic controller. (pmic_max8997.c should be deprecated.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2017-02-08net: phy: MSCC Add Support for VSC8530-VSC8531-VSC8540-VSC8541John Haechten
Signed-off-by: John Haechten <john.haechten@microsemi.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-08Merge git://git.denx.de/u-boot-dmTom Rini
2017-02-08GPIO: Correct doc typo "confguration" -> "configuration"Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2017-02-08Remove unused symbol CONGIG_CMD_STORAGE from board configsLars Poeschel
Albeit it's a typo, neither CONGIG_CMD_STORAGE nor CONFIG_CMD_STORAGE are used anywhere, so remove the define from the board configs. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08cmd: move CONFIG_CMD_UNZIP and CONFIG_CMD_ZIP to KconfigMasahiro Yamada
CONFIG_CMD_ZIP is not defined by any board. I am moving CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family. I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP" is better for this platform. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Ryan Harkin <ryan.harkin@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
2017-02-08arm64: fix comment in relocate_64.SMasahiro Yamada
There are two typos in the comment "invalide i-cache is enabled". We can fix it by invalide -> invalidate is -> if Or, if we want to match the comment to the code, we can say "skip invalidating i-cache if disabled". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08keystone2: Rename local CONFIG_ symbolPhil Edworthy
CONFIG_SPL_STACK_SIZE is not a config option, so rename it. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
2017-02-08regulator: palmas: Fix smps6 - smps9 indicesKeerthy
The array indices used currently are dispalaced by 1 for SMPS6 through SMPS10 in the respective places of voltage and ctrl arrays hence fix the same as to assign the right voltage and ctrl registers. Signed-off-by: Keerthy <j-keerthy@ti.com>
2017-02-08pwm: remove unneeded ifdef CONFIG_DM_PWM ... endifMasahiro Yamada
Both CONFIG_PWM_TEGRA and CONFIG_PWM_EXYNOS depend on CONFIG_DM_PWM, i.e. they are already guarded by Kconfig correctly. Remove unneeded ifdef CONFIG_DM_PWM ... endif. While we are here, let's tidy up alignment and sort the lines alphabetically in Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08common: env_sf: Use CONFIG_SF_DEFAULT_xxx as the default value for ↵Jean-Jacques Hiblot
CONFIG_ENV_SPI_xxx The default values for the configuration defines CONFIG_ENV_SPI_xxx are arbitrary values. It makes more sense to set them to the values used by the sf command. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08pcm052: fix DDR initialization sequenceAlbert ARIBAUD \(3ADEV\)
The sequence erroneously launched the DDR controller initialization before the pad muxing was done, causing DRAM size computation to hang. Configuring the pads first then launching DDR controller initialization prevents the DRAM hanging. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
generated by cgit (git 2.34.1) at 2024-12-25 13:29:52 +0000