summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-07cmd: efidebug: new sub-command tablesHeinrich Schuchardt
Provide sub-command for efidebug to list configuration tables. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07cmd: efidebug: simplify get_guid_text()Heinrich Schuchardt
When we hit a matching GUID we can directly return the text. There is no need for a check after the loop. efi_guid_t is defined as 8 byte aligned but GUIDs in packed structures do not follow this alignment. Do not require the argument of get_guid_text() to be correctly aligned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: define all known warning status codesHeinrich Schuchardt
Of all warning status codes up to now only EFI_WARN_DELETE_FAILURE is defined. The patch adds the missing definitions for later usage. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: free load options after executionHeinrich Schuchardt
When be launch a binary via bootefi the bootargs environment variable is used to set the load options in the loaded image protocol. Free memory allocated for load options when the UEFI binary exits. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: Add guidcpy functionSughosh Ganu
Add guidcpy function to copy the source guid to the destination guid. Use this function instead of memcpy for copying to the destination guid. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Use void * instead of efi_guid_t * for arguments to allow copying unaligned GUIDs. The GUIDs of configuration tables are __packed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: __cyg_profile_func_enter/_exitHeinrich Schuchardt
U-Boot can be compiled with function tracing enabled. When compiling with FTRACE __cyg_profile_func_enter() is called when a function is entered and __cyg_profile_func_exit() when the function is left. To avoid a crash we have to define these function for the free-standing UEFI binaries. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07part: efi: comment for GPT_HEADER_SIGNATURE_UBOOTHeinrich Schuchardt
Add a comment indicating that the value of GPT_HEADER_SIGNATURE_UBOOT equals the ASCII string 'EFI PART'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: clear screen should move cursor to homeHeinrich Schuchardt
On a VT100 terminal <ESC>[2J should be enough to both clear the whole screen and set the cursor to position (1, 1). But the Linux console does not behave like this. So send an extra <ESC>[H. For reference see the console_codes(4) man page. Add a function description. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07test/py: describe env__efi_loader_helloworld_fileHeinrich Schuchardt
Describe the components of environment variable env__efi_loader_helloworld_file. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: git ignore helloworld_efi.SHeinrich Schuchardt
Add *.S to .gitignore. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_selftest: Update .gitignoreSughosh Ganu
Add the following file to .gitignore efi_miniapp_file_image_exception.h Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Use efi_miniapp_*.h instead of file enumeration. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: export efi_install_fdt()Heinrich Schuchardt
Use a pointer to addressable memory instead of a "physical" address in the virtual address space of the sandbox to efi_install_fdt(). Export the efi_install_fdt() function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: carve out efi_run_image()Heinrich Schuchardt
Provide public function efi_run_imager() which can be used to run an UEFI image from memory. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: use hardware device tree by defaultHeinrich Schuchardt
If the bootefi command is called without passing the address of a device tree, the internal device tree is used. For devices with a hardware device tree it is preferable to used the hardware device tree in this case. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: pass address to efi_install_fdt()Heinrich Schuchardt
As part of moving the parsing of command line arguments to do_bootefi() call efi_install_fdt() with the address of the device tree instead of a string. If the address is EFI_FDT_USE_INTERNAL (= 0), the internal device tree is used. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: adjust file system infoHeinrich Schuchardt
When the GetInfo() method of the EFI_FILE_PROTOCOL is called to retrieve the file system info we claim that the volume is read only and has no free space. This leads to failures in programs that check this information before writing to the volume like SCT's InstallSct.efi. Currently there is no function to determine these parameters in U-Boot. So let's return optimistic values: Return that the volume is writable. Return the volume size as free space. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: imply USB_KEYBOARD_FN_KEYSHeinrich Schuchardt
UEFI applications like GRUB and SCT assume that function keys are enabled on the keyboard. Let EFI_LOADER imply USB_KEYBOARD_FN_KEYS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07include: pe.h: add signature-related definitionsAKASHI Takahiro
The index (IMAGE_DIRECTORY_ENTRY_SECURITY) in a table points to a region containing authentication information (image's signature) in PE format. WIN_CERTIFICATE structure defines an embedded signature format. Those definitions will be used in my UEFI secure boot patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07configs: qemu: enable FIT images on qemu_arm(64)_defconfigHeinrich Schuchardt
For testing UEFI FIT images we need FIT image support on QEMU. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07test/py: Fix broken 'notbuildconfigspec' markerCristian Ciocaltea
Consider the following test sample: @pytest.mark.buildconfigspec('fit') @pytest.mark.notbuildconfigspec('generate_acpi_table') def test_sample(u_boot_console): Whatever the argument of the 'notbuildconfigspec' is, the test ends up being skipped with the message: ('/uboot/test/py/conftest.py', 463, 'Skipped: .config feature "fit" enabled') Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-06Merge branch 'next'Tom Rini
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2020-01-06Prepare v2020.01Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-04Revert "mmc: davinci: drop struct davinci_mmc_plat"Tom Rini
Adam Ford reports that this change breaks booting on da850-evm and Bartosz Golaszewski agrees that with the impending release we should revert the change for now. With that noted: This reverts commit 21a4d80a710c79053ac1deaa65ff9b69e6c031d4. Cc: Bartosz Golaszewski <brgl@bgdev.pl> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into nextTom Rini
- updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support
2020-01-03Merge branch '2020-01-03-master-imports'Tom Rini
- Fixes for host tools with musl C library - Two fixes for TI K3 platforms
2020-01-03arm: mach-k3: Enable WA for R5F deadlockLokesh Vutla
On K3 devices there are 2 conditions where R5F can deadlock: 1.When software is performing series of store operations to cacheable write back/write allocate memory region and later on software execute barrier operation (DSB or DMB). R5F may hang at the barrier instruction. 2.When software is performing a mix of load and store operations within a tight loop and store operations are all writing to cacheable write back/write allocates memory regions, R5F may hang at one of the load instruction. To avoid the above two conditions disable linefill optimization inside Cortex R5F which will make R5F to only issue up to 2 cache line fills at any point of time. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-03arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config toolLokesh Vutla
Update the ddr settings to use the DDR reg config tool rev 0.2.0. This reduces the aging count(in DDRSS_CTL_274_DATA reg) to 15 in-order to avoid DSS underflow errors. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2020-01-03include/u-boot/crc.h: pull 'uint' definition on musl targetsSergei Trofimovich
The build failure was originally reported on arm64-musl target at https://bugs.gentoo.org/703132. Here is the amd64-musl variant: ``` $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc) $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc) ... include/u-boot/crc.h:37:44: error: unknown type name 'uint'; did you mean 'int'? 37 | void crc16_ccitt_wd_buf(const uint8_t *in, uint len, | ^~~~ | int ``` Note: 'uint' is not defined there. On glibc 'uint' comes from <sys/types.h> and happens to work on most .c files. The change imports 'uint' declaration from '<compiler.h>'. Bug: https://bugs.gentoo.org/703132 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-03include: fix 'ulong' definition on musl targetsSergei Trofimovich
The build failure was originally reported on arm64-musl target at https://bugs.gentoo.org/703132. Here is the amd64-musl variant: ``` $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc) $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc) ... In file included from tools/env/../../env/flags.c:7, from tools/env/env_flags.c:1: include/env.h:159:1: error: unknown type name 'ulong'; did you mean 'long'? 159 | ulong env_get_ulong(const char *name, int base, ulong default_val); | ^~~~~ | long ``` Note: 'ulong' is not defined there. On glibc 'ulong' comes from <sys/types.h>: ```c /* Old compatibility names for C types. */ typedef unsigned long int ulong; ``` On musl it comes from <sys/types.h> as well but from under different guards: ```c typedef unsigned long u_long, ulong; ``` The change inlines 'ulong' define similar to 'uint' define. Bug: https://bugs.gentoo.org/703132 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-02Merge tag 'fixes-v2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix missing graphics output on some x86 boards - avoid using #ifdef in video code - add .gitignore for video font *.S files
2020-01-02video: add wrappers for ttf type files to .gitignoreDario Binacchi
The scripts/Makefile.lib generates an assembler file (*.S) to wrap the font data for each file of type ttf defined in Kconfig. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-01-02Merge tag 'u-boot-rockchip-20191231' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix latest mainline kernel for rk3308 - Update rk3288-evb config to suport OP-TEE - Fix for firefly-px30 DEBUG_UART channel and make it standalone - Script make_fit_atf add python3 support - Fix rk3328 timer with correct COUNTER_FREQUENCY - Fix rk3328 ATF support with enable spl-fifo-mode
2020-01-02Merge branch '2020-01-02-master-imports'Tom Rini
- Assorted test.py fixes - Other minor changes
2020-01-02test: Fix the boardspec for the SPL handoff testSimon Glass
This test currently does not run because it specifies the sandbox board instead of sandbox_spl. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02mailmap: Update mail address for Igor OpaniukIgor Opaniuk
My address at Linaro doesn't exist anymore, so people keep getting mail delivery error responses. Map this address to the actual one. Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-02test_env: don't strip() printenv resultsStephen Warren
get_env() was originally written to strip() the output of printenv to isolate the test from any whitespace changes in printenv's output. However, this throws away any whitespace in the variable value, which can cause issues when test code expects to see that whitespace. In fact, printenv never adds any whitespace at all, so there's no need to strip. The strip causes a practical problem for test_env_echo_exists() if state_test_env.get_existent_var() happens to choose a U-Boot variable that contains trailing whitespace. This is true for variable boot_targets. With Python 2, get_existent_var() never returned boot_targets so this issue never caused a practical problem. With Python 3, get_existent_var does sometimes return boot_targets, no doubt due to Python 3's different dict hash key order implementation, about 0.5-2% of the time, so this test appears intermittent. With the strip removed, this intermittency is solved, since the test passes for all possible U-Boot variables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2020-01-02arch/arm/Kconfig: typo/grammar/punctuation fixesRobert P. J. Day
Various (mostly minor) spelling, grammar and punctuation tweaks for arch/arm/Kconfig. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2020-01-02.gitignore: ignore files generated by asn1 compilerDario Binacchi
As described in doc/README.asn1 document the tools/asn1_compiler is used to "generate bytecode as a C file (*.asn1.[ch]) from *.asn1 file". Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-01-02tools: .gitignore: add asn1_compilerDario Binacchi
Add the tool to the ignore list to prevent being marked as unversioned. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-02video: Avoid using #ifdef in video-uclass.cSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use IS_ENABLED(), etc., instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02video: Avoid using #ifdef in vidconsole-uclass.cSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use CONFIG_IS_ENABLED() instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02video: Avoid using #ifdef in console_rotate.cSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use IS_ENABLED() instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02video: Avoid using #ifdef in video blitting codeSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use IS_ENABLED() instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02video: x86: Enable 32-bit graphics by defaultSimon Glass
Most x86 boards that use video make use of 32bpp graphics. Enable this by default. This fixes missing graphics output on some x86 boards. Also remove the unnecessary 'default n' while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02pci: layerscape: Manage PCIe EP compatible string via KconfigPankaj Bansal
The ep node device tree name is governed by these bindings: https://github.com/torvalds/linux/blob/master/Documentation/ devicetree/bindings/pci/layerscape-pci.txt#L24 As per above the ep compatible node contains platform name. Therefore, define the ep node compatible as CONFIG to find the pcie ep node in device tree during device tree fixup. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-01-02pci: layerscape: move PCIE related CONFIG to PCI KconfigPankaj Bansal
move the PCIE related config from arch Kconfig to PCI Kconfig. As the PCI_LAYERSCAPE driver is being used in platform other than fsl-layerscape platforms like ls102xa. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-31rockchip: evb-rk3328: Enable support ATF in SPLKever Yang
Enable the ATF in SPL and adjust the SPL STACK/HEAD at the same time to support ATF entry at 0x40000. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-31rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmcKever Yang
Since mmc to sram can't do dma, add patch to prevent aborts transfering TF-A parts. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-31rockchip: rk3328: add COUNTER_FREQUENCY definitionKever Yang
The arch timer needs COUNTER_FREQUENCY to get correct counter, add it to make the timer works correct. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-28Merge tag 'u-boot-imx-20191228' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.01 ----------------- - Fixes for Nitrogen6x - Fix corruption for mx51evk - colibri i.MX6: fix broken ESDHC conversion - mx6sxsabresd: fix broken mmcdev - imx6q_logic: cleanup boot sequence - update ATF for imx8mq_evk - pfuze: fix pmic_get() Travis CI: https://travis-ci.org/sbabic/u-boot-imx/builds/630007464
generated by cgit (git 2.34.1) at 2025-01-10 08:31:54 +0000