summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-21buildman: Update the 'theory of operation' a littleSimon Glass
Make a few updates to this important section of the documentation, to make things clearer. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Show a summary of the build resultSimon Glass
When buildman finishes it leaves the last summary line visible, which shows the number of successful builds, builds with warnings and builds with errors. It is useful also to see how many builds were done in total along with the time taken. Show these on a separate line before buildman finishes. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Limit the length of progress messagesSimon Glass
If a progress message is longer than the terminal line it will scroll the terminal. Limit the messages to the terminal width. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Show the number of builds remainingSimon Glass
It is nice to see the actual number of builds remaining to complete. Add this in the progress message, using a different colour. Drop the unnecessary 'name' variable while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Drop unused output codeSimon Glass
The commit counter is a hangover from when buildman processed each board for a commit. Now buildman processes each commit for a board, so this output is never triggered. Delete it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Show a message when fetching a repoSimon Glass
Fetching updated versions of a repo can take time. At present buildman gives no indication that it is doing this. Add a message to explain the delay. Tidy up a few other messages while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Drop the line-clearing code in BuilderSimon Glass
The new feature in terminal can be used by buildman. Update the Builder class accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21patman: Support limiting output to a single lineSimon Glass
When outputing a progress line we don't want it to go past the end of the current terminal line, or it will not be possible to erase it. Add an option to Print() which allows limiting the output to the terminal width. Since ANSI sequences do not take up space on the terminal, these are removed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21patman: Support erasing a previously unfinished text lineSimon Glass
When printing progress it is useful to print a message and leave the cursor at the end of the line until the operation is finished. When it is finished, the line needs to be erased so a new line can start in its place. Add a function to handle clearing a line previously written by terminal.Print() Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21patman: Update flushing Print() for Python 3Simon Glass
This does not seem to work on Python 3. Update the code to use the built-in support. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Use spaces in the board listSimon Glass
At present the board names shown with -l are separated by commas. This makes it hard to double-click to select a particular board. Also it is not possible to select all boards and paste them as arguments to a subsequent buildman run, since buildman requires spaces to separate the list on the command line, not commas. Change the output format to use spaces instead of commas. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Show the list of boards in magentaSimon Glass
It is quite hard to see the list of board for each error line since the colour is the same as the actual error line. Show the board list in magenta so that it is easier to distinguish them. There is no point in checking the colour of the overall line, since there are now multiple colours. So drop those tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Use an object to hold error linesSimon Glass
At present the string for each error line is created in _CalcErrorDelta() and used to create the summary output. This is inflexible since all the information (error/warning character, error line, list of boards with that error line) is munged together in a string. Create an object to hold this information and only convert it to a string when printing the actual output. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Use yellow consistently for warning linesSimon Glass
At present warnings are shown in yellow in the summary (-s) but magenta in the detail listing (-e). Use yellow in both. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Test the output with --list-error-boardsSimon Glass
Add a test to cover this flag, which adds the name of each board to each error/warning line. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Add a test helper for creating a line prefixSimon Glass
The split/join code is repeated in a lot of places. Add a function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Split out testOutput() into separate functionsSimon Glass
We want to add a few more tests similar to testOutput(). Split its logic into a function which runs buildman to get the output and another which checks the output. This will make it easier to reuse the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Create temp directory in test setupSimon Glass
Rather than having a few tests handle this themselves, create the temporary directory in the setUp() method and remove it in tearDown(). This will make it easier to add more tests. Only testOutput and testGit() actually need it, but it doesn't add to the test time noticeably to do this for all tests in this file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Use an iterator to check test outputSimon Glass
Rather than using the absolute array index, use an interator to work through the expected output lines. This is easier to follow. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Add test coverage for error/warning colourSimon Glass
Buildman should output the right colours for each error/warning line. Some of these checks are missing. Add them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Refactor error-line output int a functionSimon Glass
Reduce the amount of repeated code by creating an _OutputErrLines() function to hold this code. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2cTom Rini
i2c changes for 2020.07 - add new i2c driver for Broadcom iproc-based socs - fix cmd: eeprom: Staticize eeprom_i2c_bus - i2c: muxes: pca954x: add PCA9546 variant
2020-04-21Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubiTom Rini
new ubi command for renaming an UBI volume
2020-04-21mmc: tmio: sdhi: Add DMA transfer address alignment check at writingHiroyuki Yokoyama
In R-Car Gen 3, there is a DMA controller restriction of SDHI. When the transfer exceeding the 4 kByte boundary is performed while the DRAM address is not 128 byte aligned, the bus is occupied. This patch avoids this. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-04-20Merge branch '2020-04-17-master-imports'Tom Rini
- Further cleanups for 'make refcheckdocs' - Another BTRFS fix. - Support for automatic decompression of images with booti as well as unlz4 command for manual decompression.
2020-04-20Merge tag 'u-boot-amlogic-20200420' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - enable DM_RNG on meson boards - fix SMBIOS info on Odroid-C2 - Fix video output on GXBB/GXL/GXM boards - add USB gadget support for GXL/GXM boards
2020-04-20fs: btrfs: support sparse extentsMarek Behún
When logical address of a regular extent is 0, the extent is sparse and consists of all zeros. Without this when sparse extents are used in a file reading fails with Cannot map logical address 0 to physical Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-04-20Merge tag 'ti-v2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix boot on am335x guardian board - Increase OPSI speed on AM65x and J721E devices - Use JTAD register for identifying K3 devices. - Update TI entry in MAINTAINERS file.
2020-04-20Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini
2020-04-20configs: libretech-s912-pc: Enable USB gadget with Mass Storage functionNeil Armstrong
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: libretech-s905d-pc: Enable USB gadget with Mass Storage functionNeil Armstrong
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: khadas-vim: Enable USB gadget with Mass Storage functionNeil Armstrong
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: khadas-vim2: Enable USB gadget with Mass Storage functionNeil Armstrong
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: libretech-ac: Enable USB gadget with Mass Storage functionNeil Armstrong
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: libretech-cc: Enable USB gadget with Mass Storage functionNeil Armstrong
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20arm: dts: meson-gxl: Add USB Gadget nodes for U-BootNeil Armstrong
Add the USB DWC2 node to u-boot specific dtsi files since Gadget support is not (yet) available in upstream Linux yet. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20arm: meson-gx: add board_usb_init()/cleanup() for USB gadgetNeil Armstrong
Add arch code to initialize USB Gadget mode using the DWC2 controller, and using the previously added set_mode() phy functions. [narmstrong: fixup board_usb_cleanup call to phy_meson_gxl_usb2_set_mode] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20phy: meson-gxl-usb: add set_mode call to force switch to peripheral modeNeil Armstrong
Add set_mode function in the Amlogic GXL PHYs that will be called by the arch code to switch PHYs from/to gadget mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20generic-phy: add generic_phy_get_by_node()Neil Armstrong
Add generic_phy_get_by_node() to get a PHY phandle from a node instead of a udevice. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com> [narmstrong: fixed by including ofnode.h in generic-phy.h]
2020-04-20t208xqds: add support for backplane krFlorinel Iordache
Add support for backplane kr on t208xqds: remove board specific fixups on t208xqds for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20lx2160aqds: add support for backplane krFlorinel Iordache
Add support for backplane kr on lx2160aqds: remove board specific fixups on lx2160aqds for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20ls1046aqds: add support for backplane krFlorinel Iordache
Add support for backplane kr on ls1046aqds: remove board specific fixups on ls1046aqds for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20phy: add support for backplane kr modeFlorinel Iordache
Add generic support for backplane kr modes currently available: 10gbase-kr, 40gbase-kr4. Remove platform generic fixups (armv8/layerscape and powerpc) for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20armv8: ls1028a: define esdhc_status_fixupYinbo Zhu
This patch is to define esdhc_status_fixup function for ls1028a to disable SDHC1/SDHC2 status in device tree node if not selected. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20board: fsl: lx2160a: unused variable gic_lpi_baseHeinrich Schuchardt
If the board is configured without CONFIG_GIC_V3_ITS, an error occurs: board/freescale/lx2160a/lx2160a.c: In function ‘ft_board_setup’: board/freescale/lx2160a/lx2160a.c:673:6: error: unused variable ‘gic_lpi_base’ [-Werror=unused-variable] 673 | u64 gic_lpi_base; | ^~~~~~~~~~~~ Let's define the variable as __maybe_unused. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20drivers: i2c: add brcm iproc I2C driver supportRayagonda Kokatanur
Add I2C driver support for Broadcom iproc-based socs. Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20cmd: eeprom: Staticize eeprom_i2c_busMarek Vasut
The eeprom_i2c_bus is not used outside of this file, make it static. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20i2c: muxes: pca954x: add PCA9546 variantChris Packham
This adds the PCA9546 4-channel i2c bus switch. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20cmd: ubi: add a command to rename volumePhilippe Reynes
This commit adds the command ubi rename to rename an ubi volume. The format of the command is: ubi rename <oldname> <newname>. To enable this command, the option CMD_UBI_RENAME must be selected. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-19arm: mach-k3: Use JTAD_ID register for device identificationLokesh Vutla
JTAG ID register is defined by IEEE 1149.1 for device identification. Use this JTAG ID register for identifying AM65x[0] and J721E[1] devices instead of using SoC specific registers. [0] http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf [1] http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2025-01-31 05:04:24 +0000