summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-17arm: imx6: configure NoC on i.MX6DQPBernhard Messerklinger
The i.MX6DP and i.MX6QP incorporate NoC interconnect logic which needs to be configured in order to use external DDR memory. This patch enables the SPL to configure the necessary registers in accordance with the NXP engineering bulletin EB828. Co-developed-by: Filip Brozović <fbrozovic@gmail.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2020-04-17mx6ulz_14x14_evk: Disable CONFIG_NETFabio Estevam
Currently the following build warning is seen: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. =================================================== Since the mx6ulz-evk board does not have networking support, explicitly disable networking to avoid the board removal. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-04-17mx6ullevk: Enable Ethernet supportFabio Estevam
Add Ethernet support using DM_ETH. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx6ul_evk: Remove FEC related board codeFabio Estevam
mx6ul_evk uses DM_ETH, so there is no need to have board code to setup the FEC IOMUX and to register the network ports via the old board_eth_init() method. Remove these FEC related pieces of code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx6ul_evk: Move CONFIG_FEC_MXC to defconfigFabio Estevam
CONFIG_FEC_MXC is supported in Kconfig, so it is preferred to move it to defconfig file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx7ulp: Only enable LDO if it is not already enabledFabio Estevam
LDO mode may be already enabled by the ROM and enabling it again can cause U-Boot to hang. Avoid this problem by only enabling LDO mode if it is initially disabled. Reported-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17mx7ulp: Remove duplicated definitionsFabio Estevam
These PMC0 definitions are already defined in the beginning of the file, so remove the duplication. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17ata: sort ATA commandsHeinrich Schuchardt
Sort the ATA commands in include/libata.h by number. Add a few more comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-17include/ata.h: remove invalid linksHeinrich Schuchardt
Remove invalid URLs for "Information Technology - AT Attachment-3 Interface (ATA-3)", point to ANSI X3.298-1997. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-17Kconfig: fix typos in CMD_BEDBUG descriptionHeinrich Schuchardt
Fix documentation bug reported by 'make refcheckdocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-17doc: fix references to driver-modelHeinrich Schuchardt
Fix some errors pointed out by 'make refcheckdocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17README: replace reference to boards.cfgHeinrich Schuchardt
boards.cfg is not delivered with the U-Boot source. So it is preferable to look at configs/*_defconfig to identify available deconfigs. Fix a typo. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17image: Add compressed Image parsing support in booti.Atish Patra
Add compressed Image parsing support so that booti can parse both flat and compressed Image to boot Linux. Currently, it is difficult to calculate a safe address for every board where the compressed image can be decompressed. It is also not possible to figure out the size of the compressed file as well. Thus, user need to set two additional environment variables kernel_comp_addr_r and filesize to make this work. Following compression methods are supported for now. lzma, lzo, bzip2, gzip. lz4 support is not added as ARM64 kernel generates a lz4 compressed image with legacy header which U-Boot doesn't know how to parse and decompress. Tested on HiFive Unleashed and Qemu for RISC-V. Tested on Qemu for ARM64. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix minor rST formatting problems] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-17image: Add a common compression type detection function.Atish Patra
Currently, there is no method that can detect compression types given a file. This is very useful where a compressed kernel image is loaded directly to the memory. Inspect initial few bytes to figure out compression type of the image. It will be used in booti method for now but can be reused any other function in future as well. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-17lib: kconfig: Add option to set BZIP2 compression methodAtish Patra
There is no way to select BZIP2 compression method. Add it under library/compression config where all other compression related configs are present. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-17cmd: mem: Add bitflip memory test to alternate mtestStefan Roese
This additional bitflip memory test is inspired by the bitflip test in memtester v4.3.0. It show some errors on some problematic GARDENA MT7688 based boards. The other memory tests usually don't show any errors here. Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17cmd: mem: Use IS_ENABLED instead of alt_test variableStefan Roese
This patch uses the IS_ENABLED() macro to check, which mtest variant is enabled. Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17cmd: mem: Drop eldk-4.2 workaround and use cast in unmap_sysmem()Stefan Roese
Use a cast instead of the "eldk-4.2" workaround for unmap_sysmem(). Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17cmd: mem: Correctly count the errors in mtestStefan Roese
This patch changes mtest to correctly count the overall errors and print them even in the abort (Ctrl-C) case. Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17tee: optee: use dev_info in print_os_revisionPatrick Delaunay
Display TEE version at information level; this patch replaces debug() call to dev_info() in print_os_revision() function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-04-17doc: spl: update reference to driver-model/README.txtPatrick Delaunay
Update the reference in doc/README.SPL to a no more existing file: "driver-model/README.txt", it is changed to "doc/driver-model/design.rst". Adding the directory path /doc/ allows to check this reference with 'make refcheckdocs'. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17scripts: add documentation-file-ref-checkHeinrich Schuchardt
'make refcheckdocs' requires scripts/documentation-file-ref-check. Adopt script from Linux v5.6-rc3. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-17mkimage: fit: don't create image with 0700 permissionsThomas Hebb
commit 7298e422504e ("mkimage: fit: add support to encrypt image with aes") added a new copyfile() function as part of the FIT image creation flow. This function as currently written creates the final image with a mode of 0700 (before umask), differing from the old behavior of 0666. Since there doesn't seem to be any reason to make the image executable or non-group, non-other readable, change the mask to 0666 to preserve the old behavior. Fixes: 7298e422504e ("mkimage: fit: add support to encrypt image with aes") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2020-04-17ide: remove duplicate defines form include/ata.hHeinrich Schuchardt
ATA commands are already defined in include/libata.h. There is no need to duplicate them in include/ata.h. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17block: ide: use definitions from include/libata.hHeinrich Schuchardt
Currently ATA commands are defined both in include/libata.h and include/ata.h. Use the command definitions from include/libata.h where applicable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17cmd: fat: remove unused includesHeinrich Schuchardt
Remove unused includes from cmd/fat.c. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17arm: dts: add pwm support for MediaTek SoCsSam Shih
This patch add pwm support for mt7622, mt7623 and mt7629 SoCs Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-04-17mediatek: pwm: add pwm driver for MediaTek SoCsSam Shih
This driver support the standard PWM API for MediaTek MT7623, MT7622 and MT7629 SoCs Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-04-17cmd: Add unlz4 commandYusuke Ashiduka
This command is a new command called "unlz4" that decompresses from memory into memory. Used with the CONFIG_CMD_UNLZ4 optionenabled. Signed-off-by: Yusuke Ashiduka <ashiduka@fujitsu.com> [trini: Use %zd / %zX not %ld / %lX in printf] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-17env: make file-scope env_ptr variables staticRasmus Villemoes
The combination ENV_IS_IN_NVRAM=y, ENV_IS_IN_REMOTE=y fails to build: env/remote.o:/mnt/ext4/devel/u-boot/env/remote.c:17: multiple definition of `env_ptr' env/nvram.o:/mnt/ext4/devel/u-boot/env/nvram.c:41: first defined here It's not necessarily a meaningful combination, but for build-testing it's nice to be able to enable most ENV_IS_IN_* at the same time, and since these env_ptr are not declared anywhere, they really have no reason to have external linkage. nand.c and flash.c similarly already define file-scope static env_ptr variables. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-17ARM: bootm: take into account gd->ram_topPatrice Chotard
If gd->ram_top has been tuned using board_get_usable_ram_top(), it must be taken into account when reserving arch lmb. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-17Merge branch '2020-04-16-master-imports'Tom Rini
- DM GPIO improvements - BTRFS fixes - Corrections around gd->new_bootstage alignment - Start documentation improvements to support 'make refcheckdocs'
2020-04-17configs: ls1012afrwy: fix board nameBiwen Li
Fix board name for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-17net: fm: fix build error when not using nandFrancois Gervais
If CONFIG_CMD_NAND is disabled, get_nand_dev_by_index() is not accessible. This fix allows the build to succeed in this case. Signed-off-by: Francois Gervais <fgervais@distech-controls.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-16board_f.c: Ensure 16 alignment of start_addr_sp and reserved memoryPatrick Delaunay
Add a function reserve_stack_aligned() to reserved memory with 16 bits alignment after the stack pointer (gd->start_addr_sp) and use this new function in board_f.c to reserve all the memory area (malloc, board, gd, fdt, bootstage, stacks). This 16 byte alignment is needed for cast on struct pointer for the reserved memory, for example: + x86_64 ABI: https://reviews.llvm.org/D30049: 16 bytes + ARMv8 Instruction Set Overview: quad word, 16 bytes An other alignment value could be needed for other architecture. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-16arm: set the relocated gd with gd->new_gdPatrick Delaunay
Simplify the arm relocation behavior and get gd directly form new_gd, as it is already done in crt0_64.S: ldr x18, [x18, #GD_NEW_GD] /* x18 <- gd->new_gd */ This patch avoid assumption on new GD location (new GD is below bd - with #GD_SIZE offset). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16Revert "stm32mp1: remove the imply BOOTSTAGE"Patrick Delaunay
This reverts the workaround introduced by the commit 16fec9b0bc1a ("stm32mp1: remove the imply BOOTSTAGE") As the bootstage alignment issue is now solved. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16board_f.c: Ensure gd->new_bootstage alignmentPatrice Chotard
In reserve_bootstage(), in case size is odd, gd->new_bootstage is not aligned. In bootstage_relocate(), the platform hangs when getting access to data->record[i].name. To avoid this issue, make gd->new_bootstage 16 byte aligned. To ensure that new_bootstage is 16 byte aligned (at least needed for x86_64 and ARMv8) and new_bootstage starts down to get enough space, ALIGN_DOWN macro is used. Fixes: ac9cd4805c8b ("bootstage: Correct relocation algorithm") Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas MANOCHA <vikas.manocha@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16arm: imx: update reference to README.mxc_habPatrick Delaunay
Update reference in files detected by scripts/documentation-file-ref-check doc/README.mxc_hab => doc/imx/habv4/* Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: device-tree-bindings: update reference to binding directoryPatrick Delaunay
Update reference in files detected by scripts/documentation-file-ref-check doc/devicetree/device-tree-bindings/ => doc/device-tree-bindings/ Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: update reference to README.boardPatrick Delaunay
Update reference in files detected by scripts/documentation-file-ref-check doc/README.<board> => board/<board>/README Files moved in board directory in commit 702e6014f15b ("doc: cleanup - move board READMEs into respective board directories")' Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: update reference to README.imx8imagePatrick Delaunay
Update reference in many files detected by scripts/documentation-file-ref-check README.imx8image => imx/mkimage/imx8image.txt Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: update reference to README.imximagePatrick Delaunay
Update reference in many files detected by scripts/documentation-file-ref-check README.imximage => imx/mkimage/imximage.txt Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16Kconfig: update reference to README.x86Patrick Delaunay
Update reference in Kconfig detected by scripts/documentation-file-ref-check README.x86 => doc/arch/x86.rst Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16README: update reference to *.READMEPatrick Delaunay
Update some reference in README file detected by scripts/documentation-file-ref-check *.README => README.* Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-16test: pinmux: add pincontrol-gpio for pin configurationPatrick Delaunay
Add a simple pincontrol associated to the sandbox gpio driver, that allows to check pin configuration with the command pinmux. The pinmux test is also updated to test behavior with 2 pincontrols. Example to check LED pin configuration: => pinmux list | Device | Driver | Parent | pinctrl-gpio | sandbox_pinctrl_gpio | root_driver | pinctrl | sandbox_pinctrl | root_driver => pinmux dev pinctrl-gpio => pinmux status a0 : gpio input . a1 : gpio input . a2 : gpio input . a3 : gpio input . a4 : gpio input . a5 : gpio output . a6 : gpio output . ... Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16test: dm: update test for pins configuration in gpioPatrick Delaunay
Add tests for new API set_dir_flags and set_dir_flags and associated code in gpio uclass. Test support for new flags GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE GPIO_PULL_UP and GPIO_PULL_DOWN. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16gpio: sandbox: cleanup binding supportPatrick Delaunay
Cleanup binding support, use the generic binding by default (test u-class gpio_xlate_offs_flags function) and add specific binding for added value. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16test: dm: update test for pins configuration in pinctrl nodePatrick Delaunay
Add test for "pins" configuration in gpio uclass with set_state() ops and test for generic parsing of pinconf_param array). set_state() is called by: - pinctrl_generic_set_state |- pinctrl_generic_set_state_subnode Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16pinctrl: sandbox: Add mux information in get_pin_muxingPatrick Delaunay
Add param information in pin information output. This update prepare unitary test for pin configuration in pinctrl node. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-02-07 13:51:38 +0000